All MIBs › HP-ICF-RIP › hpicfRipAutoSummary
hpicfRipAutoSummary
Module: HP-ICF-RIP
OID (symbolic): HP-ICF-RIP::hpicfRipAutoSummary
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: A flag indicating whether RIP should perform border filtering on subnet routes when crossing a network boundary. Interfaces that are configured for RIPv1 or RIPv1-compatible mode must always filter subnets at network boundaries. Interfaces configured for RIPv2 mode will only filter subnets if this flag is set to 'true'. Setting this to 'true' will result in all subnets within a class-based network to be summarized using a single route for the subnet number, which can decrease the size of the routing tables. However, if any networks are discontiguous, this flag should be set to 'false' for proper routing.
What is hpicfRipAutoSummary?
This read-write TruthValue controls whether RIP performs automatic subnet summarization at classful network boundaries; RIPv1 interfaces always summarize, while RIPv2 interfaces only do so if this is true, and it should be false when networks are discontiguous. Admins disable it in environments with discontiguous subnets to avoid routing black holes caused by over-aggregated summary routes. For example, an admin running RIPv2 across a network split by a non-RIP transit segment would set this to false to keep individual subnet routes advertised correctly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.3 snmpwalk -v2c -c public <target> HP-ICF-RIP::hpicfRipAutoSummary
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.3.1 snmpget -v2c -c public <target> HP-ICF-RIP::hpicfRipAutoSummary.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.3.1 s <value>
Start monitoring HP ProCurve Layer 3 switch/router (RIP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RIP::hpicfRipAutoSummary OID value, configure state conditions and alerts, and monitor any HP ProCurve Layer 3 switch/router (RIP extensions) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.13 | hpicfRip | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.13.1 | hpicfRipObjects | HP-ICF-RIP |
| 1.3.6.1.4.1.11.2.14.11.5.1.13.1.1 | hpicfRipGeneral | HP-ICF-RIP |
| 1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.3 | hpicfRipAutoSummary | HP-ICF-RIP |