HP-ICF-PIM6 :: hpicfPim6IpMRouteNHopClsMHops

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HP-ICF-PIM6 › hpicfPim6IpMRouteNHopClsMHops

hpicfPim6IpMRouteNHopClsMHops

Module: HP-ICF-PIM6

OID (symbolic): HP-ICF-PIM6::hpicfPim6IpMRouteNHopClsMHops

OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21.1.13

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The minimum number of hops between this router and any member of this IP multicast group reached via this next-hop on this outgoing interface. Any IP multicast datagrams for the group that have a TTL (IPv4) or Hop Count (IPv6) less than this number of hops will not be forwarded to this next-hop.

A value of 0 means all multicast datagrams are forwarded out the interface. A value of 256 means that no multicast datagrams are forwarded out the interface. This is an optimization applied by multicast routing protocols that explicitly track hop counts to downstream listeners. Multicast protocols that are not aware of hop counts to downstream listeners set this object to 0.

What is hpicfPim6IpMRouteNHopClsMHops?

Reports the minimum hop count to any group member reachable via this next-hop; multicast datagrams with a smaller TTL/Hop Count than this value won't be forwarded out this next-hop. 0 forwards everything, 256 forwards nothing; protocols that don't track downstream hop counts leave this at 0.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21.1.13
snmpwalk -v2c -c public <target> HP-ICF-PIM6::hpicfPim6IpMRouteNHopClsMHops

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21.1.13.1
snmpget -v2c -c public <target> HP-ICF-PIM6::hpicfPim6IpMRouteNHopClsMHops.1

Start monitoring HP ProCurve Layer 3 switch/router (PIMv6/IPv6 multicast) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-PIM6::hpicfPim6IpMRouteNHopClsMHops OID value, configure state conditions and alerts, and monitor any HP ProCurve Layer 3 switch/router (PIMv6/IPv6 multicast) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5hpicfSwitchCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1hpSwitchCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1.122hpicfPim6MIBHP-ICF-OID
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.5.1.122.1hpicfPim6ObjectsHP-ICF-PIM6
1.3.6.1.4.1.11.2.14.11.5.1.122.1.1hpicfPim6HP-ICF-PIM6
1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21hpicfPim6IpMRouteNHopTableHP-ICF-PIM6
1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21.1hpicfPim6IpMRouteNHopEntryHP-ICF-PIM6
1.3.6.1.4.1.11.2.14.11.5.1.122.1.1.21.1.13hpicfPim6IpMRouteNHopClsMHopsHP-ICF-PIM6