All MIBs › HP-ICF-PIM › hpicfPimTrapControl
hpicfPimTrapControl
Module: HP-ICF-PIM
OID (symbolic): HP-ICF-PIM::hpicfPimTrapControl
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Indicates whether the PIM-enabled router will generate SNMP traps for PIM events. The set bit means 'enabled'.
- neighborLoss(0) This bit controls whether the notification trap is allowed to be sent when the neighbor timer expires and the router has no other neighbors on the same interface with a lower IP address than itself.
- hardMrtFull(1) This bit controls whether the notification trap is allowed to be sent when the MRT table is full and the error has been originated by hardware.
- softMrtFull(2) This bit controls whether the notification trap is allowed to be sent when the MRT table is full and the error has been originated by software.
What is hpicfPimTrapControl?
A bitmask selecting which PIM conditions generate SNMP traps: neighbor loss, a hardware-full multicast routing table, or a software-full one, letting an admin choose which PIM events are worth alerting on.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4 snmpwalk -v2c -c public <target> HP-ICF-PIM::hpicfPimTrapControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4.1 snmpget -v2c -c public <target> HP-ICF-PIM::hpicfPimTrapControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4.1 s <value>
Start monitoring HP ProCurve Layer 3 switch (PIM multicast routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-PIM::hpicfPimTrapControl OID value, configure state conditions and alerts, and monitor any HP ProCurve Layer 3 switch (PIM multicast routing) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.20 | hpicfPimMIB | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1 | hpicfPimObjects | HP-ICF-PIM |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1 | hpicfPim | HP-ICF-PIM |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4 | hpicfPimTrapControl | HP-ICF-PIM |