All MIBs › HP-ICF-NTP-MIB › hpicfNtpServerNameAssoBurst
hpicfNtpServerNameAssoBurst
Module: HP-ICF-NTP-MIB
OID (symbolic): HP-ICF-NTP-MIB::hpicfNtpServerNameAssoBurst
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.121.1.8.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This option is used for, to speed up the initial synchronization acquisition with the server, Below are different options supported.
noburst - Burst not set, Polling happens with configured or default poll interval.
burst - Send a burst of eight packets instead of the usual one packet. The interval between the first and the second packets is about 16 seconds to allow a modem call to complete, while the spacing between the remaining packets is about 2s.
iburst - Send a burst of eight packets instead of the usual one. As long as the server is unreachable, the interval between packets is about 16 seconds to allow a modem call to complete. After the server is reachable, the spacing between packets is about 2 seconds.
What is hpicfNtpServerNameAssoBurst?
Configures whether this hostname-based NTP server association sends a burst of eight packets (burst/iburst) instead of one when starting synchronization, the name-based counterpart to hpicfNtpAssoBurst for speeding up initial time lock.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.121.1.8.1.10 snmpwalk -v2c -c public <target> HP-ICF-NTP-MIB::hpicfNtpServerNameAssoBurst
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.121.1.8.1.10.1 snmpget -v2c -c public <target> HP-ICF-NTP-MIB::hpicfNtpServerNameAssoBurst.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.121.1.8.1.10.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpicfNtpServerNameAssoBurst.1
Start monitoring HP ProCurve/Aruba switch/router (NTP client) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-NTP-MIB::hpicfNtpServerNameAssoBurst OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch/router (NTP client) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.121 | hpicfNtpMIB | HP-ICF-NTP-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.121.1 | hpicfNtpConfig | HP-ICF-NTP-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.121.1.8 | hpicfNtpInetServerNameTable | HP-ICF-NTP-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.121.1.8.1 | hpicfNtpInetServerNameEntry | HP-ICF-NTP-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.121.1.8.1.10 | hpicfNtpServerNameAssoBurst | HP-ICF-NTP-MIB |