All MIBs › HP-ICF-MLD-MIB › hpicfMldConfigForcedLeaveInterval
hpicfMldConfigForcedLeaveInterval
Module: HP-ICF-MLD-MIB
OID (symbolic): HP-ICF-MLD-MIB::hpicfMldConfigForcedLeaveInterval
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: When a port's hpicfMldPortConfigEntryForcedLeaveFeature is enabled, this is the amount of time allowed for an MLD Report to arrive and cancel deletion of a multicast group requested by a previous MLD Leave request. Units are tenths of seconds.
What is hpicfMldConfigForcedLeaveInterval?
When a port has hpicfMldPortConfigEntryForcedLeaveFeature enabled, this sets — in tenths of a second — how long the switch waits after an MLD Leave for a new Report to arrive before actually removing the group from that port; lengthen it if legitimate members are being dropped too aggressively after a Leave.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.2 snmpwalk -v2c -c public <target> HP-ICF-MLD-MIB::hpicfMldConfigForcedLeaveInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.2.1 snmpget -v2c -c public <target> HP-ICF-MLD-MIB::hpicfMldConfigForcedLeaveInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.2.1 i <value>
Start monitoring HP ProCurve/Aruba switch (IPv6 MLD snooping/querier) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-MLD-MIB::hpicfMldConfigForcedLeaveInterval OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (IPv6 MLD snooping/querier) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.48 | hpicfMldMIB | HP-ICF-MLD-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.48.1 | hpicfMldObjects | HP-ICF-MLD-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.48.1.1 | hpicfMld | HP-ICF-MLD-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.2 | hpicfMldConfigForcedLeaveInterval | HP-ICF-MLD-MIB |