All MIBs › HP-ICF-IPCONFIG › hpicfIpv6InterfaceDhcpMode
hpicfIpv6InterfaceDhcpMode
Module: HP-ICF-IPCONFIG
OID (symbolic): HP-ICF-IPCONFIG::hpicfIpv6InterfaceDhcpMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this flag to 'dhcpFull' will clear any existing IP address configuration for this interface and will cause the device to use a dynamic method (e.g. DHCP) to obtain its IP configuration and other configuration parameter (such as gateway, time of day, etc...) for this interface.
Setting this flag to 'dhcpInform' will allow manual IP address configuration and yet permit other configuration parameters (such as gateway, time of day, etc...) to be obtained from a DHCP server.
Setting this flag to 'disabled' will not allow any of the above mentioned two configuration, but interface can have link-local, auto-config and manual ip-address.
What is hpicfIpv6InterfaceDhcpMode?
Selects how this interface gets its IPv6 configuration: dhcpFull(1) clears static config and uses DHCPv6 for everything, dhcpInform(2) keeps a manual address but pulls extras from DHCP, and disabled(0) blocks DHCP while still allowing link-local, autoconfig, or manual addressing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.1 snmpwalk -v2c -c public <target> HP-ICF-IPCONFIG::hpicfIpv6InterfaceDhcpMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.1.1 snmpget -v2c -c public <target> HP-ICF-IPCONFIG::hpicfIpv6InterfaceDhcpMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.1.1 i <value>
Start monitoring HP ProCurve switch (basic IP address/interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-IPCONFIG::hpicfIpv6InterfaceDhcpMode OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (basic IP address/interface configuration) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.10 | hpicfIpConfig | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3 | hpicfIpv6ConfigObjects | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2 | hpicfIpv6InterfaceObjects | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1 | hpicfIpv6InterfaceTable | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1 | hpicfIpv6InterfaceEntry | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.1 | hpicfIpv6InterfaceDhcpMode | HP-ICF-IPCONFIG |