All MIBs › HP-ICF-IPCONFIG › hpicfIpv6InterfaceCfgEnableStatus
hpicfIpv6InterfaceCfgEnableStatus
Module: HP-ICF-IPCONFIG
OID (symbolic): HP-ICF-IPCONFIG::hpicfIpv6InterfaceCfgEnableStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. Setting this object to up(1) will enable ipv6 for the given interface.Setting this object to down(2) will disable the ipv6 for the interface only if hpicfIpv6InterfaceDhcpMode, hpicfIpv6InterfaceManual and hpicfIpv6InterfaceAutoConfig are disabled.A get on this object reflects the data saved in a non-volatile storage. Note:To get the current ipv6 status for an interface refer to ipv6InterfaceEnableStatus.
What is hpicfIpv6InterfaceCfgEnableStatus?
Sets whether IPv6 is administratively enabled (up) or disabled (down) on this interface, persisted to non-volatile storage; disabling requires DHCP, manual, and autoconfig addressing to already be off, and the live status is read from ipv6InterfaceEnableStatus instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.6 snmpwalk -v2c -c public <target> HP-ICF-IPCONFIG::hpicfIpv6InterfaceCfgEnableStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.6.1 snmpget -v2c -c public <target> HP-ICF-IPCONFIG::hpicfIpv6InterfaceCfgEnableStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.6.1 i <value>
Start monitoring HP ProCurve switch (basic IP address/interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-IPCONFIG::hpicfIpv6InterfaceCfgEnableStatus OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (basic IP address/interface configuration) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.10 | hpicfIpConfig | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3 | hpicfIpv6ConfigObjects | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2 | hpicfIpv6InterfaceObjects | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1 | hpicfIpv6InterfaceTable | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1 | hpicfIpv6InterfaceEntry | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.6 | hpicfIpv6InterfaceCfgEnableStatus | HP-ICF-IPCONFIG |