All MIBs › HP-ICF-IPCONFIG › hpicfIpv4InterfaceDhcpEnable
hpicfIpv4InterfaceDhcpEnable
Module: HP-ICF-IPCONFIG
OID (symbolic): HP-ICF-IPCONFIG::hpicfIpv4InterfaceDhcpEnable
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Changing this flag to 'full' will clear any existing IP address configuration for this interface and will cause the device to use a dynamic method (e.g. DHCP) to obtain its IP configuration and other configuration parameter (such as gateway, time of day, etc...) for this interface.
Setting this flag to 'inform' will allow manual IP address configuration and yet permit other configuration parameters (such as gateway, time of day, etc...) to be obtained from a DHCP server.
Setting this flag to 'off' will allow manual IP configuration but disallow any DHCP configuration.
What is hpicfIpv4InterfaceDhcpEnable?
Selects how this interface gets its IPv4 configuration: full(1) clears any static config and uses DHCP for everything, inform(3) keeps a manual IP but still pulls extras like gateway/time from DHCP, and off(2) disables DHCP entirely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.1 snmpwalk -v2c -c public <target> HP-ICF-IPCONFIG::hpicfIpv4InterfaceDhcpEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.1.1 snmpget -v2c -c public <target> HP-ICF-IPCONFIG::hpicfIpv4InterfaceDhcpEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.1.1 i <value>
Start monitoring HP ProCurve switch (basic IP address/interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-IPCONFIG::hpicfIpv4InterfaceDhcpEnable OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (basic IP address/interface configuration) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.10 | hpicfIpConfig | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.1 | hpicfIpConfigObjects | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2 | hpicfIpv4InterfaceObjects | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1 | hpicfIpv4InterfaceTable | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1 | hpicfIpv4InterfaceEntry | HP-ICF-IPCONFIG |
| 1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.1 | hpicfIpv4InterfaceDhcpEnable | HP-ICF-IPCONFIG |