All MIBs › HP-ICF-CHAIN › hpicfChainViewName
hpicfChainViewName
Module: HP-ICF-CHAIN
OID (symbolic): HP-ICF-CHAIN::hpicfChainViewName
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.1.6.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The local name of this box. This is used by the proxy agent for the box to determine which box on the Distributed Management Chain is being addressed. If an agent does not use this method to distinguish proxy destinations, it should return a zero length octet string for this object.
For SNMPv1, the destination box is specified by appending this name to the proxy agent's community name. For example, if this agent has a community with a community name of 'public', and the value of this object is 'repeater1', the community 'public/repeater1' will specify that the agent should proxy to the public community of the 'repeater1' box.
The default value for this object for box-level repeaters is an ASCII hex representation of the low-order three bytes of the device MAC address.
What is hpicfChainViewName?
This is the local name, up to 15 characters, that a proxy agent uses to determine which box on the Distributed Management Chain is being addressed, with an empty string if the agent does not support this naming method. Under SNMPv1, admins reach a specific chained box by appending this name to the proxy agent's community string, e.g. community 'public/repeater1' to reach the box named 'repeater1'. By default this name is an ASCII hex representation of the low-order three bytes of the device's MAC address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.1.6.1.2 snmpwalk -v2c -c public <target> HP-ICF-CHAIN::hpicfChainViewName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.1.6.1.2.1 snmpget -v2c -c public <target> HP-ICF-CHAIN::hpicfChainViewName.1
Start monitoring HP AdvanceStack/ProCurve device (Distributed Management Chain stacking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-CHAIN::hpicfChainViewName OID value, configure state conditions and alerts, and monitor any HP AdvanceStack/ProCurve device (Distributed Management Chain stacking) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.1 | hpicfChain | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.1.6 | hpicfChainViewTable | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.1.6.1 | hpicfChainViewEntry | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.1.6.1.2 | hpicfChainViewName | HP-ICF-CHAIN |