All MIBs › HP-ICF-BASIC › hpicfSwitchSnmpAllowUnsecuredAccessToMACsec
hpicfSwitchSnmpAllowUnsecuredAccessToMACsec
Module: HP-ICF-BASIC
OID (symbolic): HP-ICF-BASIC::hpicfSwitchSnmpAllowUnsecuredAccessToMACsec
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.4.18.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable unsecured access through SNMP for the hpicfMACsec MIB.
When this object is disabled, access to the hpicfMACsec MIB is permitted only when SNMPv3 is used with authentication and privacy.
When this object is enabled, access to the MIB is not restricted for SNMPv3 with privacy and access through SNMPv1, SNMPv2, and SNMPv3 is allowed.
Access to this MIB object would further be controlled by the switch-wide settings for SNMP.
What is hpicfSwitchSnmpAllowUnsecuredAccessToMACsec?
This flag controls whether the MACsec-related MIB can be accessed via SNMPv1, SNMPv2, or unauthenticated SNMPv3, or is restricted to only SNMPv3 with authentication and privacy; it defaults to disabled (restricted). Because MACsec configuration is security-sensitive, this is normally left disabled except during troubleshooting with weaker SNMP clients.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.18.3 snmpwalk -v2c -c public <target> HP-ICF-BASIC::hpicfSwitchSnmpAllowUnsecuredAccessToMACsec
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.18.3.1 snmpget -v2c -c public <target> HP-ICF-BASIC::hpicfSwitchSnmpAllowUnsecuredAccessToMACsec.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.4.18.3.1 i <value>
Start monitoring HP ProCurve/Aruba (ICF-based) switch (core device management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-BASIC::hpicfSwitchSnmpAllowUnsecuredAccessToMACsec OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba (ICF-based) switch (core device management) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.4 | hpicfBasic | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.4.18 | hpicfBasicSNMPConfig | HP-ICF-BASIC |
| 1.3.6.1.4.1.11.2.14.11.1.4.18.3 | hpicfSwitchSnmpAllowUnsecuredAccessToMACsec | HP-ICF-BASIC |