All MIBs › HP-ICF-BASIC › hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy
hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy
Module: HP-ICF-BASIC
OID (symbolic): HP-ICF-BASIC::hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.4.18.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable unsecured access through SNMP for the ieee8021SecY MIB.
When this object is disabled, access to the ieee8021SecY MIB is permitted only when SNMPv3 is used with authentication and privacy.
When this object is enabled, access to the MIB is not restricted for SNMPv3 with privacy and access through SNMPv1, SNMPv2, and SNMPv3 is allowed.
Access to this MIB object would further be controlled by the switch-wide settings for SNMP.
What is hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy?
This flag controls whether the IEEE 802.1X-2010 Secy (MACsec) standard MIB can be accessed via SNMPv1, SNMPv2, or unauthenticated SNMPv3, or is restricted to only SNMPv3 with authentication and privacy; it defaults to disabled (restricted). Like its sibling object for the HP-specific MACsec MIB, it's a security control best left at its default unless a legacy SNMP tool genuinely needs access.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.18.4 snmpwalk -v2c -c public <target> HP-ICF-BASIC::hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.18.4.1 snmpget -v2c -c public <target> HP-ICF-BASIC::hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.4.18.4.1 i <value>
Start monitoring HP ProCurve/Aruba (ICF-based) switch (core device management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-BASIC::hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba (ICF-based) switch (core device management) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.4 | hpicfBasic | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.4.18 | hpicfBasicSNMPConfig | HP-ICF-BASIC |
| 1.3.6.1.4.1.11.2.14.11.1.4.18.4 | hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy | HP-ICF-BASIC |