All MIBs › HP-ICF-BASIC › hpicfResetDefault
hpicfResetDefault
Module: HP-ICF-BASIC
OID (symbolic): HP-ICF-BASIC::hpicfResetDefault
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.4.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The switch boots from 'primary image' or 'secondary image' based on this object.
What is hpicfResetDefault?
This selects which firmware image, 'primary' or 'secondary', the switch will boot from on its next restart. Admins set this to fail back to a known-good secondary image if a firmware upgrade to the primary image causes problems.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.16 snmpwalk -v2c -c public <target> HP-ICF-BASIC::hpicfResetDefault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.16.1 snmpget -v2c -c public <target> HP-ICF-BASIC::hpicfResetDefault.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.4.16.1 i <value>
Start monitoring HP ProCurve/Aruba (ICF-based) switch (core device management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-BASIC::hpicfResetDefault OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba (ICF-based) switch (core device management) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.4 | hpicfBasic | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.4.16 | hpicfResetDefault | HP-ICF-BASIC |