All MIBs › HP-ICF-BASIC › hpicfIncludeCredentials
hpicfIncludeCredentials
Module: HP-ICF-BASIC
OID (symbolic): HP-ICF-BASIC::hpicfIncludeCredentials
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.4.19.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object: enabled - Include password and credentials in the switch configuration. disabled - Do not include credentials in the switch configuration. radiusTacasOnly - Enable only the RADIUS and TACACS+ server keys in the switch configuration.
NOTE: This will insert possibly sensitive information in switch configuration files, and as a part of some CLI commands output. It is strongly recommended that you use SFTP rather than TFTP for transfer of the configuration over the network, and that you use the web configuration interface only with SSL enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.19.2 snmpwalk -v2c -c public <target> HP-ICF-BASIC::hpicfIncludeCredentials
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.19.2.1 snmpget -v2c -c public <target> HP-ICF-BASIC::hpicfIncludeCredentials.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.4.19.2.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.4 | hpicfBasic | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.4.19 | hpicfBasicConfig | HP-ICF-BASIC |
| 1.3.6.1.4.1.11.2.14.11.1.4.19.2 | hpicfIncludeCredentials | HP-ICF-BASIC |