All MIBs › HP-ICF-BASIC › hpicfConfigClear
hpicfConfigClear
Module: HP-ICF-BASIC
OID (symbolic): HP-ICF-BASIC::hpicfConfigClear
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.4.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
When this object is set to 'configClear', the agent replies, dallies a short time to allow the reply to be emitted from the device, clears all of its nonvolitile parameters back to their factory defaults then resets the device. Note that this will result in all parameters being cleared, including network configuration. This function should be used with extreme caution.
When read, this object always returns 'running'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.4 snmpwalk -v2c -c public <target> HP-ICF-BASIC::hpicfConfigClear
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.4.1 snmpget -v2c -c public <target> HP-ICF-BASIC::hpicfConfigClear.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.4.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.11 | hp | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2 | nm | DATAPROTECTOR-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.4 | hpicfBasic | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.4.4 | hpicfConfigClear | HP-ICF-BASIC |