HMPRIV-MGMT-SNMP-MIB :: hmSysSelftestRebootOnHdxError

MIB Reference — IPNetwork Monitor

All MIBsHMPRIV-MGMT-SNMP-MIBhmSysSelftestRebootOnHdxError

hmSysSelftestRebootOnHdxError

Module: HMPRIV-MGMT-SNMP-MIB

OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmSysSelftestRebootOnHdxError

OID (numeric): 1.3.6.1.4.1.248.14.1.1.41.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description:

If enabled the software does a reboot if there is a Half duplex mismatch error is detected. The option depends on hmSysSelftestRebootOnError.

What is hmSysSelftestRebootOnHdxError?

This configuration parameter enables or disables automatic system reboot when a half-duplex mismatch error is detected during network diagnostics on Hirschmann industrial switches. Administrators set this control to choose between automatic recovery or manual intervention when link duplex configuration problems occur. The behavior is dependent on the parent self-test reboot-on-error setting being enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.1.1.41.4
snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmSysSelftestRebootOnHdxError

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.1.1.41.4.1
snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmSysSelftestRebootOnHdxError.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.1.1.41.4.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.248hirschmannHM2-TC-MIB
1.3.6.1.4.1.248.14hmConfigurationHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.1hmChassisHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.1.1hmSystemTableHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.1.1.41hmSysSelftestGroupHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.1.1.41.4hmSysSelftestRebootOnHdxErrorHMPRIV-MGMT-SNMP-MIB