All MIBs › HMPRIV-MGMT-SNMP-MIB › hmSysBOOTPEnable
hmSysBOOTPEnable
Module: HMPRIV-MGMT-SNMP-MIB
OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmSysBOOTPEnable
OID (numeric): 1.3.6.1.4.1.248.14.1.1.23
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Enable/Disable BOOTP operation. A (1) enables, a (2) disables. When disabled, no BOOTPs are transmitted by the system. When enabled, the system sends BOOTP requests at booting.
What is hmSysBOOTPEnable?
This object controls whether the system sends BOOTP (Bootstrap Protocol) requests when the device boots up to automatically obtain IP configuration from a BOOTP server. BOOTP is a legacy protocol for obtaining initial network configuration before DHCP became standard. Operators enable this when the device boots into a network with a BOOTP server, or disable it to use static configuration or other methods instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.1.1.23 snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmSysBOOTPEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.1.1.23.1 snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmSysBOOTPEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.1.1.23.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1 | hmChassis | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.1 | hmSystemTable | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.1.23 | hmSysBOOTPEnable | HMPRIV-MGMT-SNMP-MIB |