All MIBs › HMPRIV-MGMT-SNMP-MIB › hmSigConSensePS2State
hmSigConSensePS2State
Module: HMPRIV-MGMT-SNMP-MIB
OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmSigConSensePS2State
OID (numeric): 1.3.6.1.4.1.248.14.2.12.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Sets the monitoring of the power supply 2.
What is hmSigConSensePS2State?
This holds a configuration setting (read-write) that controls monitoring of the second power supply. When enabled, the system continuously monitors power supply 2 and triggers alerts if it fails or operates abnormally. A data center operator would use this to ensure redundant power is properly supervised and failures are immediately detected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.2.12.1.1.12 snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmSigConSensePS2State
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.2.12.1.1.12.1 snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmSigConSensePS2State.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.2.12.1.1.12.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2 | hmAgent | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.12 | hmDeviceMonitoringGroup | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.12.1 | hmSigConConfigTable | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.12.1.1 | hmSigConConfigEntry | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.12.1.1.12 | hmSigConSensePS2State | HMPRIV-MGMT-SNMP-MIB |