All MIBs › HMPRIV-MGMT-SNMP-MIB › hmRS2SigRelayManualState
hmRS2SigRelayManualState
Module: HMPRIV-MGMT-SNMP-MIB
OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmRS2SigRelayManualState
OID (numeric): 1.3.6.1.4.1.248.14.1.10.10.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
When set to on, this is the default, the signalling relay is opened. When set to off the relay is closed.
What is hmRS2SigRelayManualState?
This object controls the manual state of a signaling relay in the equipment, allowing it to be opened (inactive) or closed (active). When set to 'on' (default), the relay is open; when 'off', it is closed. An operator would use this to manually override or control relay states for equipment maintenance or emergency signaling control.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.1.10.10.2 snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmRS2SigRelayManualState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.1.10.10.2.1 snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmRS2SigRelayManualState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.1.10.10.2.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1 | hmChassis | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.10 | hmRS2ext | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.10.10 | hmRS2SigRelayGroup | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.10.10.2 | hmRS2SigRelayManualState | HMPRIV-MGMT-SNMP-MIB |