HMPRIV-MGMT-SNMP-MIB :: hmRS2SelftestMode

MIB Reference — IPNetwork Monitor

All MIBsHMPRIV-MGMT-SNMP-MIBhmRS2SelftestMode

hmRS2SelftestMode

Module: HMPRIV-MGMT-SNMP-MIB

OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmRS2SelftestMode

OID (numeric): 1.3.6.1.4.1.248.14.1.10.12.2

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description:

Mode of the selftest coded as an integer value with each bit representing a special behaviour of the tests.

Meaning of the bits: Bit 0: reboot on failure Bit 1: show failure with hmRS2SigRelayState (a trap will be send also) Bit 2: do switch memory test on start up Bit 3: Clear Bit 2 after next reboot if test has been successfully completed

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.1.10.12.2
snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmRS2SelftestMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.1.10.12.2.1
snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmRS2SelftestMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.1.10.12.2.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.248hirschmannHM2-TC-MIB
1.3.6.1.4.1.248.14hmConfigurationHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.1hmChassisHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.1.10hmRS2extHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.1.10.12hmRS2SelftestGroupHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.1.10.12.2hmRS2SelftestModeHMPRIV-MGMT-SNMP-MIB