All MIBs › HMPRIV-MGMT-SNMP-MIB › hmNetPTPPortBurstEnable
hmNetPTPPortBurstEnable
Module: HMPRIV-MGMT-SNMP-MIB
OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmNetPTPPortBurstEnable
OID (numeric): 1.3.6.1.4.1.248.14.2.3.40.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Controls the burst enable flag.
What is hmNetPTPPortBurstEnable?
This is a boolean switch (true/false) that controls whether burst mode is enabled on a PTP port. It tells you if the port can send traffic in high-rate bursts rather than constant rate. An operator would enable this on a port when dealing with bursty traffic patterns to optimize throughput during peak demand periods.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.2.3.40.2.1.3 snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmNetPTPPortBurstEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.2.3.40.2.1.3.1 snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmNetPTPPortBurstEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.2.3.40.2.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2 | hmAgent | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3 | hmNetwork | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3.40 | hmNetPTPGroup | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3.40.2 | hmNetPTPPortTable | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3.40.2.1 | hmNetPTPPortEntry | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3.40.2.1.3 | hmNetPTPPortBurstEnable | HMPRIV-MGMT-SNMP-MIB |