All MIBs › HMPRIV-MGMT-SNMP-MIB › hmNetPTP2TimeSource
hmNetPTP2TimeSource
Module: HMPRIV-MGMT-SNMP-MIB
OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmNetPTP2TimeSource
OID (numeric): 1.3.6.1.4.1.248.14.2.3.41.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is hmNetPTP2TimeSource?
This object specifies which time source PTP (Precision Time Protocol) should use to synchronize the clock: typically an external reference clock, GPS, or local oscillator. Correct time source selection ensures accurate timing across the network. An operator would check and configure this when deploying PTP: switching from 'GPS' to 'local oscillator' if the external antenna is damaged, or vice versa to recover accuracy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.2.3.41.1.24 snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmNetPTP2TimeSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.2.3.41.1.24.1 snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmNetPTP2TimeSource.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.2.3.41.1.24.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2 | hmAgent | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3 | hmNetwork | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3.41 | hmNetPTP2Group | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3.41.1 | hmNetPTP2Configuration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.3.41.1.24 | hmNetPTP2TimeSource | HMPRIV-MGMT-SNMP-MIB |