HMPRIV-MGMT-SNMP-MIB :: hmNetPTP2AnnounceReceiptTimeout

MIB Reference — IPNetwork Monitor

All MIBsHMPRIV-MGMT-SNMP-MIBhmNetPTP2AnnounceReceiptTimeout

hmNetPTP2AnnounceReceiptTimeout

Module: HMPRIV-MGMT-SNMP-MIB

OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmNetPTP2AnnounceReceiptTimeout

OID (numeric): 1.3.6.1.4.1.248.14.2.3.41.2.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

What is hmNetPTP2AnnounceReceiptTimeout?

This object specifies the timeout interval in seconds that the Precision Time Protocol (PTP) version 2 timing mechanism waits for announce packets from the grandmaster clock before declaring a timeout. An operator would tune this value to balance stability of time synchronization against the speed of detecting failure of the primary time source in networks using PTP for synchronization.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.2.3.41.2.1.6
snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmNetPTP2AnnounceReceiptTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.2.3.41.2.1.6.1
snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmNetPTP2AnnounceReceiptTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.2.3.41.2.1.6.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.248hirschmannHM2-TC-MIB
1.3.6.1.4.1.248.14hmConfigurationHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.2hmAgentHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.2.3hmNetworkHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.2.3.41hmNetPTP2GroupHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.2.3.41.2hmNetPTP2PortTableHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.2.3.41.2.1hmNetPTP2PortEntryHMPRIV-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.2.3.41.2.1.6hmNetPTP2AnnounceReceiptTimeoutHMPRIV-MGMT-SNMP-MIB