All MIBs › HMPRIV-MGMT-SNMP-MIB › hmLEDRSRStandby
hmLEDRSRStandby
Module: HMPRIV-MGMT-SNMP-MIB
OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmLEDRSRStandby
OID (numeric): 1.3.6.1.4.1.248.14.1.1.35.3.2
Node type: OBJECT-TYPE
Type: LEDState
Access: read-only
Description:
Status from the Standby LED.
What is hmLEDRSRStandby?
This object reflects the current status of the Standby LED indicator on a redundant system's standby processor card or module. The LED state shows whether the standby system is ready, operational, or faulty without requiring physical access to the equipment. Operators monitor this to ensure the backup system is functioning properly and ready to take over in case the active system fails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.1.1.35.3.2 snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmLEDRSRStandby
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.1.1.35.3.2.1 snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmLEDRSRStandby.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1 | hmChassis | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.1 | hmSystemTable | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.1.35 | hmLEDGroup | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.1.35.3 | hmLEDRSRGroup | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.1.1.35.3.2 | hmLEDRSRStandby | HMPRIV-MGMT-SNMP-MIB |