All MIBs › HMPRIV-MGMT-SNMP-MIB › hmFSBootConfiguration
hmFSBootConfiguration
Module: HMPRIV-MGMT-SNMP-MIB
OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmFSBootConfiguration
OID (numeric): 1.3.6.1.4.1.248.14.2.4.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
By setting this MIB variable the user can control which configuration should be read during system initialization: default(1) : boot with factory settings local(2) : boot with locally stored configuration
What is hmFSBootConfiguration?
This read-write object allows an operator to select which configuration the system should load during the next boot: either the factory defaults or a previously saved locally-stored configuration. Setting this to 'default' causes a factory reset on the next restart, while 'local' loads the user's custom configuration. An operator would use this to restore to factory settings or switch between different saved configurations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.2.4.9 snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmFSBootConfiguration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.2.4.9.1 snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmFSBootConfiguration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.2.4.9.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2 | hmAgent | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.4 | hmFSTable | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.4.9 | hmFSBootConfiguration | HMPRIV-MGMT-SNMP-MIB |