All MIBs › HMPRIV-MGMT-SNMP-MIB › hmAgentSnmpBroadcastStormTrapFlag
hmAgentSnmpBroadcastStormTrapFlag
Module: HMPRIV-MGMT-SNMP-MIB
OID (symbolic): HMPRIV-MGMT-SNMP-MIB::hmAgentSnmpBroadcastStormTrapFlag
OID (numeric): 1.3.6.1.4.1.248.14.2.13.5.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.2.13.5.5 snmpwalk -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmAgentSnmpBroadcastStormTrapFlag
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.2.13.5.5.1 snmpget -v2c -c public <target> HMPRIV-MGMT-SNMP-MIB::hmAgentSnmpBroadcastStormTrapFlag.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.2.13.5.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hmAgentSnmpBroadcastStormTrapFlag.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2 | hmAgent | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.13 | hmAgentSnmpConfigGroup | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.13.5 | hmAgentSnmpTrapFlagsConfigGroup | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.2.13.5.5 | hmAgentSnmpBroadcastStormTrapFlag | HMPRIV-MGMT-SNMP-MIB |