All MIBs › HM2-PLATFORM-QOS-DIFFSERV-PRIVATE-MIB
Organization: Hirschmann Automation and Control GmbH
Last Updated: 2011-10-28
Category: Quality of Service, Technology: QoS, Vendor: Belden
Description: Hirschmann HiOS (HM2) private DiffServ QoS MIB for vendor-specific DSCP marking and traffic shaping policies.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HM2-PLATFORM-QOS-DIFFSERV-PRIVATE-MIB?
HM2-PLATFORM-QOS-DIFFSERV-PRIVATE-MIB is a Hirschmann private MIB for the HiOS/HM2 (Platform 2) product line, providing vendor-specific Quality of Service DiffServ configuration objects such as DSCP marking rules and traffic-shaping/policy settings. It exposes QoS configuration data rather than hardware environmental or fault information. Its monitoring value is centered on network traffic-handling configuration status: confirming DSCP classification and shaping/scheduling policies are correctly applied on switch ports, which affects how well time-sensitive traffic (e.g., industrial control or voice/video) is prioritized. It complements IETF DiffServ MIB concepts with Hirschmann-specific extensions, layered onto Hirschmann's private platform MIB tree. It is deployed on Hirschmann industrial Ethernet switches running the HiOS firmware in industrial automation and critical-infrastructure network environments, and administrators typically start with a HM2-PLATFORM-QOS-DIFFSERV-PRIVATE-MIB download to load the module into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HM2-PLATFORM-QOS-DIFFSERV-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Hirschmann HiOS (HM2 Platform 2) industrial Ethernet switches
Monitoring Examples
No object/table names were provided in the source data for this MIB, so specific instances cannot be cited; based on its description, it would expose per-port or per-class DSCP marking and shaping/policy configuration objects that an administrator polls to verify QoS treatment is correctly applied for prioritized traffic classes on a Hirschmann switch.
What Can Be Monitored
- DSCP marking configuration
- traffic shaping/policy settings
This MIB depends on
Related MIBs
Imported Objects
From HM2-TC-MIB
| HmEnabledStatus | |
| hm2PlatformMibs | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetPortNumber |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using hm2AgentDiffServPolicyPerfInOfferedPackets OID:
Select a Hirschmann HiOS Platform2 industrial switch (DiffServ QoS) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hm2AgentDiffServPolicyPerfInOfferedPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the offered packets count for the inbound policy-class instance performance entry. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hm2PlatformQOSDiffServPrivate | 1.3.6.1.4.1.248.12.7 | The Hirschmann Private Platform2 MIB for QoS DiffServ. Copyright (C) 2011. All Rights Reserved. | ||
| hm2AgentDiffServGenStatusGroup | 1.3.6.1.4.1.248.12.7.1 | |||
| HME hm2AgentDiffServGenStatusAdminMode | 1.3.6.1.4.1.248.12.7.1.1 | HmEnabledStatus | read-write | DiffServ Admin Mode |
| U32 hm2AgentDiffServGenStatusClassTableSize | 1.3.6.1.4.1.248.12.7.1.2 | Unsigned32 | read-only | Current size of the Class Table |
| U32 hm2AgentDiffServGenStatusClassTableMax | 1.3.6.1.4.1.248.12.7.1.3 | Unsigned32 | read-only | Max size of the Class Table |
| U32 hm2AgentDiffServGenStatusClassRuleTableSize | 1.3.6.1.4.1.248.12.7.1.4 | Unsigned32 | read-only | Current size of Class Rule Table |
| U32 hm2AgentDiffServGenStatusClassRuleTableMax | 1.3.6.1.4.1.248.12.7.1.5 | Unsigned32 | read-only | Max size of the Class Rule Table. |
| U32 hm2AgentDiffServGenStatusPolicyTableSize | 1.3.6.1.4.1.248.12.7.1.6 | Unsigned32 | read-only | Current Size of the Policy Table. |
| U32 hm2AgentDiffServGenStatusPolicyTableMax | 1.3.6.1.4.1.248.12.7.1.7 | Unsigned32 | read-only | Max size of the Policy Table |
| U32 hm2AgentDiffServGenStatusPolicyInstTableSize | 1.3.6.1.4.1.248.12.7.1.8 | Unsigned32 | read-only | Current size of the Policy-Class Instance Table |
| U32 hm2AgentDiffServGenStatusPolicyInstTableMax | 1.3.6.1.4.1.248.12.7.1.9 | Unsigned32 | read-only | Max size of the Policy-Class Instance Table |
| U32 hm2AgentDiffServGenStatusPolicyAttrTableSize | 1.3.6.1.4.1.248.12.7.1.10 | Unsigned32 | read-only | Current size of the Policy Attribute Table |
| U32 hm2AgentDiffServGenStatusPolicyAttrTableMax | 1.3.6.1.4.1.248.12.7.1.11 | Unsigned32 | read-only | Max size of the Policy Attribute Table |
| U32 hm2AgentDiffServGenStatusServiceTableSize | 1.3.6.1.4.1.248.12.7.1.12 | Unsigned32 | read-only | Current size of the Service Table |
| U32 hm2AgentDiffServGenStatusServiceTableMax | 1.3.6.1.4.1.248.12.7.1.13 | Unsigned32 | read-only | Max size of the Service Table |
| hm2AgentDiffServClassGroup | 1.3.6.1.4.1.248.12.7.2 | |||
| U32 hm2AgentDiffServClassIndexNextFree | 1.3.6.1.4.1.248.12.7.2.1 | Unsigned32 | read-only | This object contains an unused value for classIndex, or a zero to indicate that none exists. |
| hm2AgentDiffServClassTable | 1.3.6.1.4.1.248.12.7.2.2 | not-accessible | A table of the DiffServ class entries | |
| hm2AgentDiffServClassEntry | 1.3.6.1.4.1.248.12.7.2.2.1 | not-accessible | Represents entry for a DiffServ traffic class | |
| U32 hm2AgentDiffServClassIndex | 1.3.6.1.4.1.248.12.7.2.2.1.1 | Unsigned32 | not-accessible | The identifier for DiffServ Class entry |
| STR hm2AgentDiffServClassName | 1.3.6.1.4.1.248.12.7.2.2.1.2 | DisplayString | read-create | Name of the DiffServ traffic class |
| INT hm2AgentDiffServClassType | 1.3.6.1.4.1.248.12.7.2.2.1.3 | INTEGER | read-create | The class type indicates how the individual class match criteria are evaluated. For type all, all of the individual match conditions must be true for a packet to be considered a member of the class. For types any and acl, only one of the match criteria must be true for a packet to belong to the class; multiple matching criteria are evaluated in a sequential order, with the highest precedence awarded to the first criterion defined for the class. An acl class type copies its set of match criteria from the current rule definition of the specified ACL number. |
| U32 hm2AgentDiffServClassRuleIndexNextFree | 1.3.6.1.4.1.248.12.7.2.2.1.5 | Unsigned32 | read-only | This object contains an unused value for classRuleIndex, or a zero to indicate that none exists. This index is maintained on a per-class basis. |
| STO hm2AgentDiffServClassStorageType | 1.3.6.1.4.1.248.12.7.2.2.1.6 | StorageType | read-create | Storage-type for this conceptual row |
| ROW hm2AgentDiffServClassRowStatus | 1.3.6.1.4.1.248.12.7.2.2.1.7 | RowStatus | read-create | The status of this conceptual row. All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in hm2AgentDiffServClassRuleTable with corresponding values of hm2AgentDiffServClassIndex have been deleted. |
| INT hm2AgentDiffServClassProtoType | 1.3.6.1.4.1.248.12.7.2.2.1.9 | INTEGER | read-create | The diffserv class protocol type used to indicate how to interpret any layer 3. This attribute is only valid if the value of hm2AgentDiffServClassProtoType is set to all(1) or any(2). |
| hm2AgentDiffServClassRuleTable | 1.3.6.1.4.1.248.12.7.2.3 | not-accessible | A table of the DiffServ Class Rule entries | |
| hm2AgentDiffServClassRuleEntry | 1.3.6.1.4.1.248.12.7.2.3.1 | not-accessible | Represents entry for a set of class-match rules | |
| U32 hm2AgentDiffServClassRuleIndex | 1.3.6.1.4.1.248.12.7.2.3.1.1 | Unsigned32 | not-accessible | The identifier for DiffServ Class Rule Table entry within a class |
| INT hm2AgentDiffServClassRuleMatchEntryType | 1.3.6.1.4.1.248.12.7.2.3.1.2 | INTEGER | read-create | Class Rule match entry type, it determines which one of the individual match conditions is defined for the present class rule. This object must be created before any other match object in this row. |
| U32 hm2AgentDiffServClassRuleMatchCos | 1.3.6.1.4.1.248.12.7.2.3.1.3 | Unsigned32 | read-create | Three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame used as a class-match parameter - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to cos(1). For frames containing a double VLAN tag, this field is located in the first/outer tag. |
| IP hm2AgentDiffServClassRuleMatchDstIpAddr | 1.3.6.1.4.1.248.12.7.2.3.1.4 | IpAddress | read-create | Destination IP address match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to dstip(2). |
| IP hm2AgentDiffServClassRuleMatchDstIpMask | 1.3.6.1.4.1.248.12.7.2.3.1.5 | IpAddress | read-create | Destination IP address mask match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to dstip(2). This mask value identifies the portion of hm2AgentDiffServClassRuleMatchDstIpAddr that is compared against a packet. A non-contiguous mask value is permitted. |
| INE hm2AgentDiffServClassRuleMatchDstL4PortStart | 1.3.6.1.4.1.248.12.7.2.3.1.6 | InetPortNumber | read-create | Destination layer 4 port range start match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to dstl4port(3). |
| INE hm2AgentDiffServClassRuleMatchDstL4PortEnd | 1.3.6.1.4.1.248.12.7.2.3.1.7 | InetPortNumber | read-create | Destination layer 4 port range end match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to dstl4port(3). |
| MAC hm2AgentDiffServClassRuleMatchDstMacAddr | 1.3.6.1.4.1.248.12.7.2.3.1.8 | MacAddress | read-create | Destination MAC address match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to dstmac(4). |
| MAC hm2AgentDiffServClassRuleMatchDstMacMask | 1.3.6.1.4.1.248.12.7.2.3.1.9 | MacAddress | read-create | Destination MAC address mask match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to dstmac(4). This mask value identifies the portion of hm2AgentDiffServClassRuleMatchDstMacAddr that is compared against a packet. A non-contiguous mask value is permitted. |
| T/F hm2AgentDiffServClassRuleMatchEvery | 1.3.6.1.4.1.248.12.7.2.3.1.10 | TruthValue | read-only | Flag to indicate that the class rule is defined to match on every packet, regardless of content. - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to every(5). |
| U32 hm2AgentDiffServClassRuleMatchIpDscp | 1.3.6.1.4.1.248.12.7.2.3.1.11 | Unsigned32 | read-create | IP DiffServ Code Point (DSCP) match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP is defined as the high-order six bits of the Service Type octet in the IPv4 header. |
| U32 hm2AgentDiffServClassRuleMatchIpPrecedence | 1.3.6.1.4.1.248.12.7.2.3.1.12 | Unsigned32 | read-create | IP Precedence match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to ipprecedence(7). The Precedence bits are defined as the high-order three bits of the Service Type octed in the IPv4 header. |
| OCT hm2AgentDiffServClassRuleMatchIpTosBits | 1.3.6.1.4.1.248.12.7.2.3.1.13 | OCTET STRING | read-create | IP TOS bits match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to iptos(8). The TOS bits are defined as all eight bits of the Service Type octet in the IPv4 header. |
| OCT hm2AgentDiffServClassRuleMatchIpTosMask | 1.3.6.1.4.1.248.12.7.2.3.1.14 | OCTET STRING | read-create | IP TOS bits mask match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to iptos(8). This mask value identifies the portion of hm2AgentDiffServClassRuleMatchIpTosBits that is compared against a packet. A non-contiguous mask value is permitted. |
| U32 hm2AgentDiffServClassRuleMatchProtocolNum | 1.3.6.1.4.1.248.12.7.2.3.1.15 | Unsigned32 | read-create | Protocol number match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to protocol(9). |
| U32 hm2AgentDiffServClassRuleMatchRefClassIndex | 1.3.6.1.4.1.248.12.7.2.3.1.16 | Unsigned32 | read-create | Index of the corresponding referenced class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to refclass(10). The set of match conditions defined for the reference class are directly inherited by the current class. Restrictions: 1) The class types of both, current class and the reference class must be identical (i.e., any vs. any, or all vs. all). 2) Self-referencing of class-name is not allowed. 3) Any attempt to delete the reference class while still referenced by any class shall fail. 4) The combined match criteria of classname and reference class name must be an allowed combination based on the class type. Any subsequent changes to the reference class name match criteria must maintain this validity, or the change attempt shall fail. |
| IP hm2AgentDiffServClassRuleMatchSrcIpAddr | 1.3.6.1.4.1.248.12.7.2.3.1.17 | IpAddress | read-create | Source IP address match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to srcip(11). |
| IP hm2AgentDiffServClassRuleMatchSrcIpMask | 1.3.6.1.4.1.248.12.7.2.3.1.18 | IpAddress | read-create | Source IP address mask match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to srcip(11). This mask value identifies the portion of hm2AgentDiffServClassRuleMatchSrcIpAddr that is compared against a packet. A non-contiguous mask value is permitted. |
| INE hm2AgentDiffServClassRuleMatchSrcL4PortStart | 1.3.6.1.4.1.248.12.7.2.3.1.19 | InetPortNumber | read-create | Source layer 4 port range start match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to srcl4port(12). |
| INE hm2AgentDiffServClassRuleMatchSrcL4PortEnd | 1.3.6.1.4.1.248.12.7.2.3.1.20 | InetPortNumber | read-create | Source layer 4 port range end match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to srcl4port(12). |
| MAC hm2AgentDiffServClassRuleMatchSrcMacAddr | 1.3.6.1.4.1.248.12.7.2.3.1.21 | MacAddress | read-create | Source MAC address match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to srcmac(13). |
| MAC hm2AgentDiffServClassRuleMatchSrcMacMask | 1.3.6.1.4.1.248.12.7.2.3.1.22 | MacAddress | read-create | Source MAC address mask match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to srcmac(13). This mask value identifies the portion of hm2AgentDiffServClassRuleMatchSrcMacAddr that is compared against a packet. A non-contiguous mask value is permitted. |
| T/F hm2AgentDiffServClassRuleMatchExcludeFlag | 1.3.6.1.4.1.248.12.7.2.3.1.24 | TruthValue | read-create | Class Rule exclude flag - when set to true(1), the match condition identified by hm2AgentDiffServClassRuleMatchEntryType is negated. This means that for a given field, every value is considered to be a match EXCEPT for the value specified in the class rule. This flag must be false(2) for an agendDiffServClassRuleMatchEntryType of refClass(10). This object must be set after the hm2AgentDiffServClassRuleMatchEntryType object, but before any other match object in this row |
| STO hm2AgentDiffServClassRuleStorageType | 1.3.6.1.4.1.248.12.7.2.3.1.25 | StorageType | read-create | Storage-type for this conceptual row |
| ROW hm2AgentDiffServClassRuleRowStatus | 1.3.6.1.4.1.248.12.7.2.3.1.26 | RowStatus | read-create | The status of this conceptual row. All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. |
| U32 hm2AgentDiffServClassRuleMatchCos2 | 1.3.6.1.4.1.248.12.7.2.3.1.27 | Unsigned32 | read-create | Three-bit user priority field in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame used as a class-match parameter - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to cos2(15). |
| INT hm2AgentDiffServClassRuleMatchEtypeKey | 1.3.6.1.4.1.248.12.7.2.3.1.28 | INTEGER | read-create | Ethertype keyword match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to etype(16). A keyword of custom(1) requires that the hm2AgentDiffServClassRuleMatchEtypeValue object also be set. |
| ETY hm2AgentDiffServClassRuleMatchEtypeValue | 1.3.6.1.4.1.248.12.7.2.3.1.29 | EtypeValue | read-create | Ethertype match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to etype(16) and the hm2AgentDiffServClassRuleMatchEtypeKey is set to custom(1). The allowed value for this object is 0x0600 to 0xFFFF. |
| U32 hm2AgentDiffServClassRuleMatchVlanIdStart | 1.3.6.1.4.1.248.12.7.2.3.1.30 | Unsigned32 | read-create | VLAN ID range start match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to vlanid(17). The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame. |
| U32 hm2AgentDiffServClassRuleMatchVlanIdEnd | 1.3.6.1.4.1.248.12.7.2.3.1.31 | Unsigned32 | read-create | VLAN ID range end match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to vlanid(17). The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame. |
| U32 hm2AgentDiffServClassRuleMatchVlanId2Start | 1.3.6.1.4.1.248.12.7.2.3.1.32 | Unsigned32 | read-create | Secondary VLAN ID range start match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to vlanid2(18). The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame. |
| U32 hm2AgentDiffServClassRuleMatchVlanId2End | 1.3.6.1.4.1.248.12.7.2.3.1.33 | Unsigned32 | read-create | Secondary VLAN ID range end match value for the class - only valid if the hm2AgentDiffServClassRuleMatchEntryType is set to vlanid2(18). The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame. |
| hm2AgentDiffServPolicyGroup | 1.3.6.1.4.1.248.12.7.3 | |||
| U32 hm2AgentDiffServPolicyIndexNextFree | 1.3.6.1.4.1.248.12.7.3.1 | Unsigned32 | read-only | This object contains an unused value for hm2AgentDiffServPolicyIndex, or a zero to indicate that none exists. |
| hm2AgentDiffServPolicyTable | 1.3.6.1.4.1.248.12.7.3.2 | not-accessible | A table of the DiffServ policy entries. | |
| hm2AgentDiffServPolicyEntry | 1.3.6.1.4.1.248.12.7.3.2.1 | not-accessible | Represents entry for a DiffServ policy. | |
| U32 hm2AgentDiffServPolicyIndex | 1.3.6.1.4.1.248.12.7.3.2.1.1 | Unsigned32 | not-accessible | The identifier for DiffServ Policy table entry. |
| STR hm2AgentDiffServPolicyName | 1.3.6.1.4.1.248.12.7.3.2.1.2 | DisplayString | read-create | Name of the policy |
| NUM hm2AgentDiffServPolicyType | 1.3.6.1.4.1.248.12.7.3.2.1.3 | IntfDirection | read-create | The policy type dictates whether inbound or outbound policy attribute statements are used in the policy definition. |
| U32 hm2AgentDiffServPolicyInstIndexNextFree | 1.3.6.1.4.1.248.12.7.3.2.1.4 | Unsigned32 | read-only | This object contains an unused value for hm2AgentDiffServPolicyInstIndex, or a zero to indicate that none exists. This index is maintained on a per-policy basis. |
| STO hm2AgentDiffServPolicyStorageType | 1.3.6.1.4.1.248.12.7.3.2.1.5 | StorageType | read-create | Storage-type for this conceptual row |
| ROW hm2AgentDiffServPolicyRowStatus | 1.3.6.1.4.1.248.12.7.3.2.1.6 | RowStatus | read-create | The status of this conceptual row. active(1) - this Diffserv Policy is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in hm2AgentDiffServPolicyInstTable with corresponding values of hm2AgentDiffServPolicyIndex have been deleted. |
| hm2AgentDiffServPolicyInstTable | 1.3.6.1.4.1.248.12.7.3.3 | not-accessible | A table of the policy-class instance entries. | |
| hm2AgentDiffServPolicyInstEntry | 1.3.6.1.4.1.248.12.7.3.3.1 | not-accessible | Represents entry for a policy-class instance. | |
| U32 hm2AgentDiffServPolicyInstIndex | 1.3.6.1.4.1.248.12.7.3.3.1.1 | Unsigned32 | not-accessible | The identifier for policy-class Instance table entry within a policy. |
| U32 hm2AgentDiffServPolicyInstClassIndex | 1.3.6.1.4.1.248.12.7.3.3.1.2 | Unsigned32 | read-create | Index of the DiffServ Class Table row, whose class definition is used as the policy class instance. The class index identifies the classifier definition used by the policy to establish an instance of that class (to which policy attributes can be attached). This is what connects a class (instance) to a policy. |
| U32 hm2AgentDiffServPolicyInstAttrIndexNextFree | 1.3.6.1.4.1.248.12.7.3.3.1.3 | Unsigned32 | read-only | This object contains an unused value for hm2AgentDiffServPolicyAttrIndex, or a zero to indicate that none exists. This index is maintained on a per-policy-class-instance basis. |
| STO hm2AgentDiffServPolicyInstStorageType | 1.3.6.1.4.1.248.12.7.3.3.1.4 | StorageType | read-create | Storage-type for this conceptual row. |
| ROW hm2AgentDiffServPolicyInstRowStatus | 1.3.6.1.4.1.248.12.7.3.3.1.5 | RowStatus | read-create | The status of this conceptual row. active(1) - this Diffserv Policy Instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in hm2AgentDiffServPolicyAttrTable with corresponding values of hm2AgentDiffServPolicyIndex and hm2AgentDiffServPolicyInstIndex have been deleted. |
| hm2AgentDiffServPolicyAttrTable | 1.3.6.1.4.1.248.12.7.3.4 | not-accessible | A table of policy attribute entries | |
| hm2AgentDiffServPolicyAttrEntry | 1.3.6.1.4.1.248.12.7.3.4.1 | not-accessible | Represents entry for policy attributes | |
| U32 hm2AgentDiffServPolicyAttrIndex | 1.3.6.1.4.1.248.12.7.3.4.1.1 | Unsigned32 | not-accessible | The identifier for policy-attribute entry |
| INT hm2AgentDiffServPolicyAttrStmtEntryType | 1.3.6.1.4.1.248.12.7.3.4.1.2 | INTEGER | read-create | Policy attribute statement entry type -- this entry type is essential to determine which of the individual object(s) is defined for this policy attribute statement. This object must be created before any other policy attribute statement object in the row. The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6), policeSinglerate(7) and policeTworate(8) values are only allowed for an hm2AgentDiffServPolicyType of in(1). The remaining values are only allowed for an hm2AgentDiffServPolicyType of out(2). |
| U32 hm2AgentDiffServPolicyAttrStmtMarkCosVal | 1.3.6.1.4.1.248.12.7.3.4.1.8 | Unsigned32 | read-create | Three-bit user priority field value in the 802.1Q tag header of a tagged Ethernet frame, marked as part of the inbound policy for a class instance. For frames containing a double VLAN tag, this field is located in the first/outer tag. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to markCosVal(3). |
| U32 hm2AgentDiffServPolicyAttrStmtMarkIpDscpVal | 1.3.6.1.4.1.248.12.7.3.4.1.9 | Unsigned32 | read-create | Specified IP DSCP value to mark in all inbound packets belonging to the class-instance. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4). |
| U32 hm2AgentDiffServPolicyAttrStmtMarkIpPrecedenceVal | 1.3.6.1.4.1.248.12.7.3.4.1.10 | Unsigned32 | read-create | Specified IP Precedence value to mark in all inbound packets belonging to the class-instance. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5). |
| INT hm2AgentDiffServPolicyAttrStmtPoliceConformAct | 1.3.6.1.4.1.248.12.7.3.4.1.11 | INTEGER | read-create | Policing conform action attribute statement value -- determines the action taken on conforming traffic for the policing style (simple,singlerate,tworate) currently configured for the specified class instance within the policy. The default conform action is send(3). This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceConformVal | 1.3.6.1.4.1.248.12.7.3.4.1.12 | Unsigned32 | read-create | Policing conform value attribute statement -- used to mark conforming packets when the conform action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8). |
| INT hm2AgentDiffServPolicyAttrStmtPoliceExceedAct | 1.3.6.1.4.1.248.12.7.3.4.1.13 | INTEGER | read-create | Policing exceed action attribute statement value -- determines the action taken on excess traffic for the policing style (singlerate, tworate) currently configured for the specified class instance within the policy. The default exceed action is drop(1). This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceExceedVal | 1.3.6.1.4.1.248.12.7.3.4.1.14 | Unsigned32 | read-create | Policing exceed value attribute statement -- used to mark excess packets when the exceed action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8). |
| INT hm2AgentDiffServPolicyAttrStmtPoliceNonconformAct | 1.3.6.1.4.1.248.12.7.3.4.1.15 | INTEGER | read-create | Policing non-conform action attribute statement value -- determines the action taken on nonconforming traffic for the policing style (simple, singlerate,tworate) currently configured for the specified class instance within the policy. The default non-conform action is drop(1). This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceNonconformVal | 1.3.6.1.4.1.248.12.7.3.4.1.16 | Unsigned32 | read-create | Policing non-conform value attribute statement -- used to mark nonconforming packets when the nonconform action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceSimpleCrate | 1.3.6.1.4.1.248.12.7.3.4.1.17 | Unsigned32 | read-create | Simple policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeSimple(6). |
| QOS hm2AgentDiffServPolicyAttrStmtPoliceSimpleCburst | 1.3.6.1.4.1.248.12.7.3.4.1.18 | QosBurstSize | read-create | Simple policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeSimple(6). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceSinglerateCrate | 1.3.6.1.4.1.248.12.7.3.4.1.19 | Unsigned32 | read-create | Single-rate policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7). |
| QOS hm2AgentDiffServPolicyAttrStmtPoliceSinglerateCburst | 1.3.6.1.4.1.248.12.7.3.4.1.20 | QosBurstSize | read-create | Single-rate policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7). |
| QOS hm2AgentDiffServPolicyAttrStmtPoliceSinglerateEburst | 1.3.6.1.4.1.248.12.7.3.4.1.21 | QosBurstSize | read-create | Single-rate policing excess burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceTworateCrate | 1.3.6.1.4.1.248.12.7.3.4.1.22 | Unsigned32 | read-create | Two-rate policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeTworate(8). |
| QOS hm2AgentDiffServPolicyAttrStmtPoliceTworateCburst | 1.3.6.1.4.1.248.12.7.3.4.1.23 | QosBurstSize | read-create | Two-rate policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeTworate(8). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceTworatePrate | 1.3.6.1.4.1.248.12.7.3.4.1.24 | Unsigned32 | read-create | Two-rate policing peak rate attribute statement value, specified in kbps. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeTworate(8). |
| QOS hm2AgentDiffServPolicyAttrStmtPoliceTworatePburst | 1.3.6.1.4.1.248.12.7.3.4.1.25 | QosBurstSize | read-create | Two-rate policing peak burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to policeTworate(8). |
| STO hm2AgentDiffServPolicyAttrStorageType | 1.3.6.1.4.1.248.12.7.3.4.1.34 | StorageType | read-create | Storage-type for this conceptual row. |
| ROW hm2AgentDiffServPolicyAttrRowStatus | 1.3.6.1.4.1.248.12.7.3.4.1.35 | RowStatus | read-create | The status of this conceptual row. active(1) - this Diffserv Policy Attribute is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. |
| U32 hm2AgentDiffServPolicyAttrStmtAssignQueueId | 1.3.6.1.4.1.248.12.7.3.4.1.36 | Unsigned32 | read-create | Queue identifier to which all inbound packets belonging to this class-instance are directed. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to assignQueue(12). |
| T/F hm2AgentDiffServPolicyAttrStmtDrop | 1.3.6.1.4.1.248.12.7.3.4.1.37 | TruthValue | read-only | Flag to indicate that all inbound packets belonging to this class-instance are dropped at ingress. This attribute is only valid if the hm2AgentDiffServPolicyAttrStmtEntryType is set to drop(13). |
| U32 hm2AgentDiffServPolicyAttrStmtMarkCos2Val | 1.3.6.1.4.1.248.12.7.3.4.1.38 | Unsigned32 | read-create | Three-bit user priority field value in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame, marked as part of the inbound policy for a class instance. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to markCos2Val(14). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceColorConformIndex | 1.3.6.1.4.1.248.12.7.3.4.1.39 | Unsigned32 | read-create | Index of the DiffServ Class Table row whose class definition is used to specify the policing color conform mode and value. This identifies incoming traffic categorized as 'green' packets in the network. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8). The DiffServ class referred to by this object must comply with the following restrictions: 1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an hm2AgentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively. 2) Must not conflict with any (non-excluded) match conditions in the classifier used for this policy-class instance, as indicated by the hm2AgentDiffServPolicyInstClassIndex object. 3) The color conform mode and value identified by this class index must not be the same as an existing color-aware exceed mode and value defined by the hm2AgentDiffServPolicyAttrStmtPoliceColorExceedIndex object. A class index value of 0 for this object indicates conform color awareness is not being used (e.g. color-blind mode). Setting this object to 0 causes the hm2AgentDiffServPolicyAttrStmtPoliceColorExceedIndex object to be set to 0 as well. |
| INT hm2AgentDiffServPolicyAttrStmtPoliceColorConformMode | 1.3.6.1.4.1.248.12.7.3.4.1.40 | INTEGER | read-only | Policing color conform mode -- indicates the color awareness mode of conforming traffic for the policing style (simple, singlerate, or tworate) currently configured for the specified class instance within the policy. The default value is blind(1). Any value other than blind(1) denotes the packet field to check for the existing conform color marking, which is compared to the hm2AgentDiffServPolicyAttrStmtPoliceColorConformVal object value. Packets matching this specification are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by hm2AgentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute is only valid for hm2AgentDiffServPolicyAttrStmtEntryType values of policeSimple(6), policeSinglerate(7), or policeTworate(8). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceColorConformVal | 1.3.6.1.4.1.248.12.7.3.4.1.41 | Unsigned32 | read-only | Policing color conform value -- indicates the color awareness packet mark value of conforming traffic for the policing style (simple, singlerate, or tworate) currently configured for the specified class instance within the policy. For the color conform field indicated by hm2AgentDiffServPolicyAttrStmtPoliceColorConformMode, packets containing this value are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by hm2AgentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute is only valid for hm2AgentDiffServPolicyAttrStmtEntryType values of policeSimple(6), policeSinglerate(7), or policeTworate(8), and hm2AgentDiffServPolicyAttrStmtPoliceColorConformMode values of cos(2), cos2(3), ipdscp(4), or ipprec(5). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceColorExceedIndex | 1.3.6.1.4.1.248.12.7.3.4.1.42 | Unsigned32 | read-create | Index of the DiffServ Class Table row whose class definition is used to specify the policing color exceed mode and value. This identifies incoming traffic categorized as 'yellow' packets in the network. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8). The DiffServ class referred to by this object must comply with the following restrictions: 1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an hm2AgentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively. 2) Must not conflict with any (non-excluded) match conditions in the classifier used for this policy-class instance, as indicated by the hm2AgentDiffServPolicyInstClassIndex object. 3) The color exceed mode and value identified by this class index must not be the same as an existing color-aware exceed mode and value defined by the hm2AgentDiffServPolicyAttrStmtPoliceColorConformIndex object. A class index value of 0 for this object indicates exceed color awareness is not being used. When the hm2AgentDiffServPolicyAttrStmtPoliceColorConformIndex object is 0, indicating color-blind operation, this object must also be 0. When a non-0 value is used for the hm2AgentDiffServPolicyAttrStmtPoliceColorConformIndex object, this object may remain set to 0 if exceed color awareness is not desired, or may be set to an appropriate class index value to activate exceed color aware mode. |
| INT hm2AgentDiffServPolicyAttrStmtPoliceColorExceedMode | 1.3.6.1.4.1.248.12.7.3.4.1.43 | INTEGER | read-only | Policing color exceed mode -- indicates the color awareness mode of exceeding traffic for the policing style (singlerate or tworate) currently configured for the specified class instance within the policy. The default value is blind(1). Any value other than blind(1) or unused(6) denotes the packet field to check for the existing exceed color marking, which is compared to the hm2AgentDiffServPolicyAttrStmtPoliceColorExceedVal object value. Packets matching this specification are considered to be colored 'yellow'. Use of exceed color awareness is optional, and this field is set to unused(6) when color conform aware policing is used but the color exceed value is not used. When hm2AgentDiffServPolicyAttrStmtPoliceColorConformMode value is blind(1), this object is blind(1) as well. This read-only object reflects the DiffServ class definition as indicated by hm2AgentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute is only valid for hm2AgentDiffServPolicyAttrStmtEntryType values of policeSinglerate(7) or policeTworate(8). |
| U32 hm2AgentDiffServPolicyAttrStmtPoliceColorExceedVal | 1.3.6.1.4.1.248.12.7.3.4.1.44 | Unsigned32 | read-only | Policing color exceed value -- indicates the color awareness packet mark value of exceeding traffic for the policing style (singlerate or tworate) currently configured for the specified class instance within the policy. For the color exceed field indicated by hm2AgentDiffServPolicyAttrStmtPoliceColorExceedMode, packets containing this value are considered to be colored 'yellow'. This read-only object reflects the DiffServ class definition as indicated by hm2AgentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute is only valid for hm2AgentDiffServPolicyAttrStmtEntryType values of policeSinglerate(7) or policeTworate(8), and hm2AgentDiffServPolicyAttrStmtPoliceColorExceedMode values of cos(2), cos2(3), ipdscp(4), or ipprec(5). |
| NUM hm2AgentDiffServPolicyAttrStmtRedirectIntf | 1.3.6.1.4.1.248.12.7.3.4.1.45 | InterfaceIndex | read-create | External interface number to which all inbound packets belonging to this class-instance are redirected. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to redirect(15). |
| NUM hm2AgentDiffServPolicyAttrStmtMirrorIntf | 1.3.6.1.4.1.248.12.7.3.4.1.46 | InterfaceIndex | read-create | External interface number to which all inbound packets belonging to this class-instance are mirrored. This attribute is only valid if the value of hm2AgentDiffServPolicyAttrStmtEntryType is set to mirror(16). |
| T/F hm2AgentDiffServPolicyAttrStmtMarkCosAsSecCos | 1.3.6.1.4.1.248.12.7.3.4.1.47 | TruthValue | read-create | Flag to indicate that all inbound packets belonging to this class-instance are marked with secondary cos at ingress. This attribute is only valid if the hm2AgentDiffServPolicyAttrStmtEntryType is set to markCosAsSecCos(17). |
| hm2AgentDiffServPolicyPerfInTable | 1.3.6.1.4.1.248.12.7.3.5 | not-accessible | A table of inbound policy-class performance entries | |
| hm2AgentDiffServPolicyPerfInEntry | 1.3.6.1.4.1.248.12.7.3.5.1 | not-accessible | Represents entry for the performance attributes of the associated inbound policy-class instance | |
| C32 hm2AgentDiffServPolicyPerfInOfferedPacketsEx | 1.3.6.1.4.1.248.12.7.3.5.1.2 | Counter32 | read-only | Offered packets count for the inbound policy-class instance performance entry. |
| C32 hm2AgentDiffServPolicyPerfInDiscardedPackets | 1.3.6.1.4.1.248.12.7.3.5.1.4 | Counter32 | read-only | Discarded packets count for the inbound policy-class instance performance entry. |
| C64 hm2AgentDiffServPolicyPerfInHCOfferedPackets | 1.3.6.1.4.1.248.12.7.3.5.1.6 | Counter64 | read-only | Offered packets high capacity count for the inbound policy-class instance performance entry. |
| C64 hm2AgentDiffServPolicyPerfInHCDiscardedPackets | 1.3.6.1.4.1.248.12.7.3.5.1.8 | Counter64 | read-only | Discarded packets high capacity count for the inbound policy-class instance performance entry. |
| STO hm2AgentDiffServPolicyPerfInStorageType | 1.3.6.1.4.1.248.12.7.3.5.1.9 | StorageType | read-only | Storage-type for this conceptual row. |
| ROW hm2AgentDiffServPolicyPerfInRowStatus | 1.3.6.1.4.1.248.12.7.3.5.1.10 | RowStatus | read-only | The status of this conceptual row. |
| hm2AgentDiffServPolicyPerfOutTable | 1.3.6.1.4.1.248.12.7.3.6 | not-accessible | A table of outbound policy-class performance entries | |
| hm2AgentDiffServPolicyPerfOutEntry | 1.3.6.1.4.1.248.12.7.3.6.1 | not-accessible | Represents entry for the performance attributes of the associated outbound policy-class instance | |
| C32 hm2AgentDiffServPolicyPerfOutOfferedPackets | 1.3.6.1.4.1.248.12.7.3.6.1.18 | Counter32 | read-only | Offered packets count for the outbound policy-class instance performance entry. |
| C32 hm2AgentDiffServPolicyPerfOutDiscardedPackets | 1.3.6.1.4.1.248.12.7.3.6.1.20 | Counter32 | read-only | Discarded packets count for the outbound policy-class instance performance entry. |
| C64 hm2AgentDiffServPolicyPerfOutHCOfferedPackets | 1.3.6.1.4.1.248.12.7.3.6.1.22 | Counter64 | read-only | Offered packets high capacity count for the outbound policy-class instance performance entry. |
| C64 hm2AgentDiffServPolicyPerfOutHCDiscardedPackets | 1.3.6.1.4.1.248.12.7.3.6.1.24 | Counter64 | read-only | Discarded packets high capacity count for the outbound policy-class instance performance entry. |
| STO hm2AgentDiffServPolicyPerfOutStorageType | 1.3.6.1.4.1.248.12.7.3.6.1.25 | StorageType | read-only | Storage-type for this conceptual row. |
| ROW hm2AgentDiffServPolicyPerfOutRowStatus | 1.3.6.1.4.1.248.12.7.3.6.1.26 | RowStatus | read-only | The status of this conceptual row. |
| hm2AgentDiffServServiceGroup | 1.3.6.1.4.1.248.12.7.4 | |||
| hm2AgentDiffServServiceTable | 1.3.6.1.4.1.248.12.7.4.1 | not-accessible | A table of the service entries. | |
| hm2AgentDiffServServiceEntry | 1.3.6.1.4.1.248.12.7.4.1.1 | not-accessible | Represents entry for policy assigned to an interface in a particular direction. | |
| NUM hm2AgentDiffServServiceIfIndex | 1.3.6.1.4.1.248.12.7.4.1.1.1 | InterfaceIndex | not-accessible | External interface number of the interface to which policy is assigned. |
| NUM hm2AgentDiffServServiceIfDirection | 1.3.6.1.4.1.248.12.7.4.1.1.2 | IntfDirection | not-accessible | Interface direction to which the policy is assigned. |
| U32 hm2AgentDiffServServicePolicyIndex | 1.3.6.1.4.1.248.12.7.4.1.1.3 | Unsigned32 | read-create | Index of the Policy Table row whose policy definition is attached to the interface in the specified direction. |
| INT hm2AgentDiffServServiceIfOperStatus | 1.3.6.1.4.1.248.12.7.4.1.1.4 | INTEGER | read-only | The current operational state of the DiffServ service interface. If hm2AgentDiffServGenStatusAdminMode is disable(2) then hm2AgentDiffServServiceIfOperStatus should be down(2). If hm2AgentDiffServServiceGenStatusAdminMode is changed to enable(1) then hm2AgentDiffServServiceIfOperStatus should change to up(1) if the service interface is ready to send and receive DiffServ traffic; it should remain in the down(2) state if the underlying interface hardware is not in a link up condition, if the policy definition represented by hm2AgentDiffServServicePolicyIndex is incompatible with the interface (e.g., requires more bandwidth than the current capacity of the interface), or if the policy definition is considered to be incomplete (e.g., one or more composite rows is not in the active(1) state). |
| STO hm2AgentDiffServServiceStorageType | 1.3.6.1.4.1.248.12.7.4.1.1.5 | StorageType | read-create | Storage-type for this conceptual row |
| ROW hm2AgentDiffServServiceRowStatus | 1.3.6.1.4.1.248.12.7.4.1.1.6 | RowStatus | read-create | The status of this conceptual row. active(1) - Diffserv is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. |
| hm2AgentDiffServSNMPExtensionGroup | 1.3.6.1.4.1.248.12.7.248 | |||
| hm2AgentDiffServClassNameInUseErrorReturn | 1.3.6.1.4.1.248.12.7.248.1 | Indicates that the name is already used by another class | ||
| hm2AgentDiffServClassHasRulesErrorReturn | 1.3.6.1.4.1.248.12.7.248.2 | Indicates that the class has one or more rules and can not be deleted | ||
| hm2AgentDiffServClassHasReferencesErrorReturn | 1.3.6.1.4.1.248.12.7.248.3 | Indicates that the class has one or more references and can not be deleted | ||
| hm2AgentDiffServClassTableFullErrorReturn | 1.3.6.1.4.1.248.12.7.248.4 | Indicates that the class table is full and no other classes can be added or index is out of range | ||
| hm2AgentDiffServClassRuleTableFullErrorReturn | 1.3.6.1.4.1.248.12.7.248.5 | Indicates that the class rule table is full and no other rules can be added | ||
| hm2AgentDiffServClassIndexOutOfRangeErrorReturn | 1.3.6.1.4.1.248.12.7.248.6 | Indicates that the class index is out of range | ||
| hm2AgentDiffServClassRuleIndexOutOfRangeErrorReturn | 1.3.6.1.4.1.248.12.7.248.7 | Indicates that the class rule index is out of range | ||
| hm2AgentDiffServClassRuleColorRefErrorReturn | 1.3.6.1.4.1.248.12.7.248.8 | Indicates that the class is referenced by a policy policing color awareness attribute and new rules can not be added | ||
| hm2AgentDiffServClassRuleInUseErrorReturn | 1.3.6.1.4.1.248.12.7.248.9 | Indicates that the class already has a rule of this type. IP DSCP, IP Precedence and IP TOS rule types are considered of same type | ||
| hm2AgentDiffServClassRuleInvalidReferenceErrorReturn | 1.3.6.1.4.1.248.12.7.248.10 | Indicates that the reference class does not exist or is invalid | ||
| hm2AgentDiffServClassRuleReferenceLoopErrorReturn | 1.3.6.1.4.1.248.12.7.248.11 | Indicates that a loop was detected in the reference chain | ||
| hm2AgentDiffServClassRuleMatchSecCosErrorReturn | 1.3.6.1.4.1.248.12.7.248.12 | Indicates that the class is already associated with an outbound policy and a macht secondary cos rule can not be added, or the class already has a match secondary cos rule and it can not be associated with an outbound policy | ||
| hm2AgentDiffServPolicyTableFullErrorReturn | 1.3.6.1.4.1.248.12.7.248.13 | Indicates that the policy table is full and no other policies can be added or index is out of range | ||
| hm2AgentDiffServPolicyNameInUseErrorReturn | 1.3.6.1.4.1.248.12.7.248.14 | Indicates that the name is already used by another policy | ||
| hm2AgentDiffServPolicyHasInstancesErrorReturn | 1.3.6.1.4.1.248.12.7.248.15 | Indicates that the policy has one or more instances and can not be deleted | ||
| hm2AgentDiffServPolicyHasReferencesErrorReturn | 1.3.6.1.4.1.248.12.7.248.16 | Indicates that the policy is used by one or more service-policies and can not be deleted | ||
| hm2AgentDiffServPolicyIndexOutOfRangeErrorReturn | 1.3.6.1.4.1.248.12.7.248.17 | Indicates that the policy is out of range | ||
| hm2AgentDiffServInstanceIndexOutOfRangeErrorReturn | 1.3.6.1.4.1.248.12.7.248.18 | Indicates that the instance index is out of range | ||
| hm2AgentDiffServInstanceTableFullErrorReturn | 1.3.6.1.4.1.248.12.7.248.19 | Indicates that the instance table is full and no other instances can be added | ||
| hm2AgentDiffServInstanceHasAttributesErrorReturn | 1.3.6.1.4.1.248.12.7.248.20 | Indicates that the instance has one or more attributes and can not be deleted | ||
| hm2AgentDiffServAttributeIndexOutOfRangeErrorReturn | 1.3.6.1.4.1.248.12.7.248.21 | Indicates that the attribute index is out of range | ||
| hm2AgentDiffServAttributeTableFullErrorReturn | 1.3.6.1.4.1.248.12.7.248.22 | Indicates that the attribute table is full | ||
| hm2AgentDiffServAttributeIncompatibilityErrorReturn | 1.3.6.1.4.1.248.12.7.248.23 | Indicates that the attribute type is incompatible with other existing attributes of this instance or with the policy type and can not be added | ||
| hm2AgentDiffServAttributeActionSetCosAsSecCosErrorReturn | 1.3.6.1.4.1.248.12.7.248.24 | Indicates that the set cos as secondary cos action is supported only for inbound policies | ||
| hm2AgentDiffServAttributeConformColorClassIndexErrorReturn | 1.3.6.1.4.1.248.12.7.248.25 | Indicates that the class is not valid for color-aware use | ||
| hm2AgentDiffServServiceInvalidInterfaceErrorReturn | 1.3.6.1.4.1.248.12.7.248.26 | Indicates that the interface number is not valid | ||
| hm2AgentDiffServServiceInvalidDirectionErrorReturn | 1.3.6.1.4.1.248.12.7.248.27 | Indicates that the direction is not valid | ||
| hm2AgentDiffServServiceTableFullErrorReturn | 1.3.6.1.4.1.248.12.7.248.28 | Indicates that the service table is full | ||
| hm2AgentDiffServServiceInvalidPolicyTypeErrorReturn | 1.3.6.1.4.1.248.12.7.248.29 | Indicates that the policy type does not correspond with the service type | ||
| hm2AgentDiffServInstanceExistsErrorReturn | 1.3.6.1.4.1.248.12.7.248.30 | Indicates that the policy already has an instance of the class | ||
| hm2AgentDiffServInstanceInvalidClassErrorReturn | 1.3.6.1.4.1.248.12.7.248.31 | Indicates that the class does not exist or is invalid and the instance can not be created |
RFC description
Vendor-private MIB for managing QoS and DiffServ (Differentiated Services) on HM2 platform devices.
Start monitoring Hirschmann HiOS Platform2 industrial switch (DiffServ QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.