All MIBs › HM2-NETCONFIG-MIB › hm2NetACDTrapEnable
hm2NetACDTrapEnable
Module: HM2-NETCONFIG-MIB
OID (symbolic): HM2-NETCONFIG-MIB::hm2NetACDTrapEnable
OID (numeric): 1.3.6.1.4.1.248.11.20.1.2.15
Node type: OBJECT-TYPE
Type: HmEnabledStatus
Access: read-write
Description: If enabled this trap reports an address conflict.
What is hm2NetACDTrapEnable?
Enables or disables the SNMP trap that fires when an address conflict is detected, defaulting to enabled. An admin keeps this on to be proactively alerted to IP address conflicts rather than having to poll hm2NetACDFaultState.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.20.1.2.15 snmpwalk -v2c -c public <target> HM2-NETCONFIG-MIB::hm2NetACDTrapEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.20.1.2.15.1 snmpget -v2c -c public <target> HM2-NETCONFIG-MIB::hm2NetACDTrapEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.20.1.2.15.1 s <value>
Start monitoring Hirschmann HiOS industrial Ethernet switch (management network config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-NETCONFIG-MIB::hm2NetACDTrapEnable OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS industrial Ethernet switch (management network config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.20 | hm2NetConfigMib | HM2-NETCONFIG-MIB |
| 1.3.6.1.4.1.248.11.20.1 | hm2NetConfigMibObjects | HM2-NETCONFIG-MIB |
| 1.3.6.1.4.1.248.11.20.1.2 | hm2NetACDGroup | HM2-NETCONFIG-MIB |
| 1.3.6.1.4.1.248.11.20.1.2.15 | hm2NetACDTrapEnable | HM2-NETCONFIG-MIB |