All MIBs › HM2-NETCONFIG-MIB › hm2NetACDDetectionMode
hm2NetACDDetectionMode
Module: HM2-NETCONFIG-MIB
OID (symbolic): HM2-NETCONFIG-MIB::hm2NetACDDetectionMode
OID (numeric): 1.3.6.1.4.1.248.11.20.1.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the mode of the ip address conflict detection mechanism on this device. activeAndPassive (1): Both active and passive detection are active. activeDetectionOnly (2): During configuration of a local ip address the device actively probes the network for this ip address. passiveDetectionOnly (3): The device listens passively on the network if another device with an already locally configured ip address appears. In this case the own ip address is actively defended by transmitting gratituous ARP's.
What is hm2NetACDDetectionMode?
Chooses the ACD detection mode: activeAndPassive(1) does both active probing and passive listening, activeDetectionOnly(2) probes the network only when a local address is being configured, and passiveDetectionOnly(3) only listens and defends the address with gratuitous ARP if a conflict appears. An admin picks the mode that balances conflict-detection thoroughness against extra ARP/NDP traffic on the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.20.1.2.2 snmpwalk -v2c -c public <target> HM2-NETCONFIG-MIB::hm2NetACDDetectionMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.20.1.2.2.1 snmpget -v2c -c public <target> HM2-NETCONFIG-MIB::hm2NetACDDetectionMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.20.1.2.2.1 i <value>
Start monitoring Hirschmann HiOS industrial Ethernet switch (management network config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-NETCONFIG-MIB::hm2NetACDDetectionMode OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS industrial Ethernet switch (management network config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.20 | hm2NetConfigMib | HM2-NETCONFIG-MIB |
| 1.3.6.1.4.1.248.11.20.1 | hm2NetConfigMibObjects | HM2-NETCONFIG-MIB |
| 1.3.6.1.4.1.248.11.20.1.2 | hm2NetACDGroup | HM2-NETCONFIG-MIB |
| 1.3.6.1.4.1.248.11.20.1.2.2 | hm2NetACDDetectionMode | HM2-NETCONFIG-MIB |