All MIBs › HM2-DIAGNOSTIC-MIB › hm2SigConStatusTrapCauseIndex
hm2SigConStatusTrapCauseIndex
Module: HM2-DIAGNOSTIC-MIB
OID (symbolic): HM2-DIAGNOSTIC-MIB::hm2SigConStatusTrapCauseIndex
OID (numeric): 1.3.6.1.4.1.248.11.22.1.3.1.10.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This attribute specifies the entity which produces the trap. power-supply: index of power-supply table link-failure: index of interface table temperature: 0 ext-nvm-removal: (1) sd, (2) usb, (3) serial (not supported yet) ext-nvm-not-in-sync: (1) sd, (2) usb, (3) serial (not supported yet) ring-redundancy: (1) MRP, (2) PRP, (3) HSR, (4) DLR ext-nvm-update-enabled: (1) sd, (2) usb, (3) serial (not supported yet) no-link: index of interface table 0: other errors
What is hm2SigConStatusTrapCauseIndex?
Identifies the specific entity (interface, power supply, storage medium, etc.) associated with the active cause reported in this status entry's hm2SigConStatusTrapCause.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.22.1.3.1.10.1.4 snmpwalk -v2c -c public <target> HM2-DIAGNOSTIC-MIB::hm2SigConStatusTrapCauseIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.22.1.3.1.10.1.4.1 snmpget -v2c -c public <target> HM2-DIAGNOSTIC-MIB::hm2SigConStatusTrapCauseIndex.1
Start monitoring Hirschmann industrial Ethernet switch (self-test/signal-contact diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-DIAGNOSTIC-MIB::hm2SigConStatusTrapCauseIndex OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switch (self-test/signal-contact diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.22 | hm2DiagnosticMib | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1 | hm2DiagnosticMibObjects | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.3 | hm2DiagDeviceMonitorGroup | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.3.1 | hm2SignalContactGroup | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.3.1.10 | hm2SigConStatusTable | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.3.1.10.1 | hm2SigConStatusEntry | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.3.1.10.1.4 | hm2SigConStatusTrapCauseIndex | HM2-DIAGNOSTIC-MIB |