All MIBs › HM2-DIAGNOSTIC-MIB › hm2DiagIfaceUtilizationAlarmCondition
hm2DiagIfaceUtilizationAlarmCondition
Module: HM2-DIAGNOSTIC-MIB
OID (symbolic): HM2-DIAGNOSTIC-MIB::hm2DiagIfaceUtilizationAlarmCondition
OID (numeric): 1.3.6.1.4.1.248.11.22.1.5.1.1.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: The alarm condition is given (true), if the given hm2DiagIfaceUtilizationAlarmUpperThreshold limit is exceeded by the interface utilization or if the utilization value falls below hm2DiagIfaceUtilizationAlarmLowerThreshold limit. The alarm condition will be removed, when the interface utilization value falls in between hm2DiagIfaceUtilizationAlarmLowerThreshold hm2DiagIfaceUtilizationAlarmUpperThreshold.
What is hm2DiagIfaceUtilizationAlarmCondition?
Read-only flag that is true whenever the interface's utilization has exceeded hm2DiagIfaceUtilizationAlarmUpperThreshold or dropped below hm2DiagIfaceUtilizationAlarmLowerThreshold, and clears once utilization returns between the two.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.22.1.5.1.1.5 snmpwalk -v2c -c public <target> HM2-DIAGNOSTIC-MIB::hm2DiagIfaceUtilizationAlarmCondition
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.22.1.5.1.1.5.1 snmpget -v2c -c public <target> HM2-DIAGNOSTIC-MIB::hm2DiagIfaceUtilizationAlarmCondition.1
Start monitoring Hirschmann industrial Ethernet switch (self-test/signal-contact diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-DIAGNOSTIC-MIB::hm2DiagIfaceUtilizationAlarmCondition OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switch (self-test/signal-contact diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.22 | hm2DiagnosticMib | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1 | hm2DiagnosticMibObjects | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.5 | hm2DiagIfaceUtilizationGroup | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.5.1 | hm2DiagIfaceUtilizationTable | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.5.1.1 | hm2DiagIfaceUtilizationEntry | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.5.1.1.5 | hm2DiagIfaceUtilizationAlarmCondition | HM2-DIAGNOSTIC-MIB |