All MIBs › HM2-DIAGNOSTIC-MIB › hm2DiagCableTesterStatus
hm2DiagCableTesterStatus
Module: HM2-DIAGNOSTIC-MIB
OID (symbolic): HM2-DIAGNOSTIC-MIB::hm2DiagCableTesterStatus
OID (numeric): 1.3.6.1.4.1.248.11.22.1.6.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Status of the Virtual Cable Tester active(1) - Cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
What is hm2DiagCableTesterStatus?
Controls and reports the state of the built-in virtual cable tester on a copper port: set it to active(1) to start a test, and it later reads success(2), failure(3), or uninitialized(4) once results are available; success/failure/uninitialized cannot themselves be set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.22.1.6.1 snmpwalk -v2c -c public <target> HM2-DIAGNOSTIC-MIB::hm2DiagCableTesterStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.22.1.6.1.1 snmpget -v2c -c public <target> HM2-DIAGNOSTIC-MIB::hm2DiagCableTesterStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.22.1.6.1.1 i <value>
Start monitoring Hirschmann industrial Ethernet switch (self-test/signal-contact diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-DIAGNOSTIC-MIB::hm2DiagCableTesterStatus OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switch (self-test/signal-contact diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.22 | hm2DiagnosticMib | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1 | hm2DiagnosticMibObjects | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.6 | hm2DiagCableTesterGroup | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.6.1 | hm2DiagCableTesterStatus | HM2-DIAGNOSTIC-MIB |