All MIBs › HM2-DIAGNOSTIC-MIB › hm2BootDefaultConfigOnError
hm2BootDefaultConfigOnError
Module: HM2-DIAGNOSTIC-MIB
OID (symbolic): HM2-DIAGNOSTIC-MIB::hm2BootDefaultConfigOnError
OID (numeric): 1.3.6.1.4.1.248.11.22.1.2.2
Node type: OBJECT-TYPE
Type: HmEnabledStatus
Access: read-write
Description: Enable or disable loading of the default configuration in case there is any error loading the configuration during the boot phase. If disabled the system will be halted.
What is hm2BootDefaultConfigOnError?
Controls whether the switch falls back to loading its default configuration if an error occurs reading the saved config during boot; if disabled, the device halts instead of coming up with defaults.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.11.22.1.2.2 snmpwalk -v2c -c public <target> HM2-DIAGNOSTIC-MIB::hm2BootDefaultConfigOnError
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.11.22.1.2.2.1 snmpget -v2c -c public <target> HM2-DIAGNOSTIC-MIB::hm2BootDefaultConfigOnError.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.11.22.1.2.2.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hm2BootDefaultConfigOnError.1
Start monitoring Hirschmann industrial Ethernet switch (self-test/signal-contact diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-DIAGNOSTIC-MIB::hm2BootDefaultConfigOnError OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switch (self-test/signal-contact diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.22 | hm2DiagnosticMib | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1 | hm2DiagnosticMibObjects | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.2 | hm2DiagBootGroup | HM2-DIAGNOSTIC-MIB |
| 1.3.6.1.4.1.248.11.22.1.2.2 | hm2BootDefaultConfigOnError | HM2-DIAGNOSTIC-MIB |