All MIBs › HH3C-IPSEC-MONITOR-V2-MIB › hh3cIPsecTunIKETunRemoteIDVal1V2
hh3cIPsecTunIKETunRemoteIDVal1V2
Module: HH3C-IPSEC-MONITOR-V2-MIB
OID (symbolic): HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecTunIKETunRemoteIDVal1V2
OID (numeric): 1.3.6.1.4.1.25506.2.126.1.2.1.8
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The value of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).
If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer.
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address.
If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range.
If the remote peer type is fqdn/userFqdn, this is the host name used to identify the remote peer.
If the remote peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA.
If the remote peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA.
If the remote peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
What is hh3cIPsecTunIKETunRemoteIDVal1V2?
Holds the remote peer's identity value from the associated IKE tunnel, whose meaning depends on hh3cIPsecTunIKETunRemoteIDTypeV2: an IP address, a subnet address, the start of an address range, a hostname, a DER-encoded X.500 certificate name, or an opaque vendor-specific key identifier, depending on the ID type in use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.126.1.2.1.8 snmpwalk -v2c -c public <target> HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecTunIKETunRemoteIDVal1V2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.126.1.2.1.8.1 snmpget -v2c -c public <target> HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecTunIKETunRemoteIDVal1V2.1
Start monitoring H3C VPN gateway/firewall (IPsec tunnel stats, v2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecTunIKETunRemoteIDVal1V2 OID value, configure state conditions and alerts, and monitor any H3C VPN gateway/firewall (IPsec tunnel stats, v2) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.126 | hh3cIPsecMonitorV2 | HH3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.25506.2.126.1 | hh3cIPsecObjectsV2 | HH3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.25506.2.126.1.2 | hh3cIPsecTunnelV2Table | HH3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.25506.2.126.1.2.1 | hh3cIPsecTunnelV2Entry | HH3C-IPSEC-MONITOR-V2-MIB |
| 1.3.6.1.4.1.25506.2.126.1.2.1.8 | hh3cIPsecTunIKETunRemoteIDVal1V2 | HH3C-IPSEC-MONITOR-V2-MIB |