H3C-DHCP4-MIB

All MIBs › H3C-DHCP4-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2013-04-24

Category: Protocol: DHCP, Vendor: H3C/HH3C

Description: H3C MIB for DHCPv4 server and relay management including address pools, leases, and server configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-DHCP4-MIB?

H3C-DHCP4-MIB is an H3C-specific MIB for managing and monitoring the DHCPv4 server and relay features on H3C network devices. It exposes server-side configuration flags (broadcast behavior, BOOTP compatibility, option-82 support, ping-before-offer settings) alongside operational counters for DHCP message activity, and separate relay configuration/statistics groups. This is primarily a software-service monitoring MIB: it lets an operator confirm the DHCP server process is enabled and behaving as configured, and watch counters such as bad-packet counts, BOOTP request counts, and DHCPDISCOVER/REQUEST/DECLINE counts to spot address-pool exhaustion, misbehaving clients, or a failing server process. It has no stated formal dependency on other MIBs, being a self-contained H3C proprietary module for this feature. It is typically deployed on H3C routers/switches acting as DHCP servers or relay agents in enterprise or service-provider access networks. Engineers can download the H3C-DHCP4-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-DHCP4-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C routers and switches (DHCPv4 server/relay role)

Monitoring Examples

An admin polls h3cDhcpServer2Enabled to confirm the DHCPv4 server is active, then watches h3cDhcpServer2DiscoverNum, h3cDhcpServer2RequestNum, and h3cDhcpServer2DeclineNum to gauge lease-negotiation volume and detect clients repeatedly declining offered addresses (often an address-pool conflict). A rising h3cDhcpServer2BadNum alongside h3cDhcpServer2BootpRequestNum can indicate malformed or unexpected BOOTP traffic hitting the server. Checking h3cDhcpServer2PingNumber/PingTimeout settings helps confirm the server's duplicate-address-detection ping behavior before lease assignment.

What Can Be Monitored

DHCP server enabled/config state
DHCP discover/request/decline counts
bad/malformed packet counts
BOOTP request handling
ping-before-offer configuration
relay configuration and statistics

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cCommon

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddressIPv4

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cDhcp4	1.3.6.1.4.1.2011.10.2.122			DHCPv4 MIB
h3cDhcpServer2ScalarObjects	1.3.6.1.4.1.2011.10.2.122.1
h3cDhcpServer2ConfigGroup	1.3.6.1.4.1.2011.10.2.122.1.1
T/F h3cDhcpServer2Enabled	1.3.6.1.4.1.2011.10.2.122.1.1.1	TruthValue	read-write	If the value of this object is 'true', the DHCP service is enabled.
T/F h3cDhcpServer2AlwaysBroadcast	1.3.6.1.4.1.2011.10.2.122.1.1.2	TruthValue	read-write	When the value of this object is set to 'true', the DHCP server always uses broadcast to reply the client.
T/F h3cDhcpServer2IgnoreBootp	1.3.6.1.4.1.2011.10.2.122.1.1.3	TruthValue	read-write	When the value of this object is set to 'true', the DHCP server ignores BOOTP requests.
T/F h3cDhcpServer2BootpReplyRfc1048	1.3.6.1.4.1.2011.10.2.122.1.1.4	TruthValue	read-write	When the value of this object is set to 'true', the DHCP server use RFC 1048 format to reply to BOOTP requests.
T/F h3cDhcpServer2Opt82Enabled	1.3.6.1.4.1.2011.10.2.122.1.1.5	TruthValue	read-write	When the value of this object is set to 'true', the DHCP server handles DHCP option 82.
U32 h3cDhcpServer2PingNumber	1.3.6.1.4.1.2011.10.2.122.1.1.6	Unsigned32	read-write	The number of ping packets sent out.
U32 h3cDhcpServer2PingTimeout	1.3.6.1.4.1.2011.10.2.122.1.1.7	Unsigned32	read-write	The delay for the reply of a ping packet in milliseconds.
h3cDhcpServer2StatGroup	1.3.6.1.4.1.2011.10.2.122.1.2
C64 h3cDhcpServer2BadNum	1.3.6.1.4.1.2011.10.2.122.1.2.1	Counter64	read-only	The total number of the bad packets received.
C64 h3cDhcpServer2BootpRequestNum	1.3.6.1.4.1.2011.10.2.122.1.2.2	Counter64	read-only	The total number of the BOOTREQUEST packets received.
C64 h3cDhcpServer2DiscoverNum	1.3.6.1.4.1.2011.10.2.122.1.2.3	Counter64	read-only	The total number of the DHCPDISCOVER packets received from the DHCP clients.
C64 h3cDhcpServer2RequestNum	1.3.6.1.4.1.2011.10.2.122.1.2.4	Counter64	read-only	The total number of the DHCPREQUEST packets received from the DHCP clients.
C64 h3cDhcpServer2DeclineNum	1.3.6.1.4.1.2011.10.2.122.1.2.5	Counter64	read-only	The total number of the DHCPDECLINE packets received from the DHCP clients.
C64 h3cDhcpServer2ReleaseNum	1.3.6.1.4.1.2011.10.2.122.1.2.6	Counter64	read-only	The total number of the DHCPRELEASE packets received from the DHCP clients.
C64 h3cDhcpServer2InformNum	1.3.6.1.4.1.2011.10.2.122.1.2.7	Counter64	read-only	The total number of the DHCPINFORM packets received from the DHCP clients.
C64 h3cDhcpServer2BootpReplyNum	1.3.6.1.4.1.2011.10.2.122.1.2.8	Counter64	read-only	The total number of the BOOTREPLY packets sent by the DHCP server.
C64 h3cDhcpServer2OfferNum	1.3.6.1.4.1.2011.10.2.122.1.2.9	Counter64	read-only	The total number of the DHCPOFFER packets sent by the DHCP server.
C64 h3cDhcpServer2AckNum	1.3.6.1.4.1.2011.10.2.122.1.2.10	Counter64	read-only	The total number of the DHCPACK packets sent by the DHCP server.
C64 h3cDhcpServer2NakNum	1.3.6.1.4.1.2011.10.2.122.1.2.11	Counter64	read-only	The total number of the DHCPNAK packets sent by the DHCP server.
U32 h3cDhcpServer2TotalPoolUsage	1.3.6.1.4.1.2011.10.2.122.1.2.12	Unsigned32	read-only	The percentage of IP addresses in use of all DHCP server pools.
U32 h3cDhcpServer2PoolNumber	1.3.6.1.4.1.2011.10.2.122.1.2.13	Unsigned32	read-only	The total number of DHCP server pools.
U32 h3cDhcpServer2ConflictNum	1.3.6.1.4.1.2011.10.2.122.1.2.14	Unsigned32	read-only	The total number of conflict IP in all DHCP server pools.
U32 h3cDhcpServer2AutoBindNum	1.3.6.1.4.1.2011.10.2.122.1.2.15	Unsigned32	read-only	The total number of auto binding IP in DHCP server pools.
U32 h3cDhcpServer2ManualBindNum	1.3.6.1.4.1.2011.10.2.122.1.2.16	Unsigned32	read-only	The total number of manual binding IP in DHCP server pools.
U32 h3cDhcpServer2ExpiredBindNum	1.3.6.1.4.1.2011.10.2.122.1.2.17	Unsigned32	read-only	The total number of expired binding IP in DHCP server pools.
h3cDhcpServer2Tables	1.3.6.1.4.1.2011.10.2.122.2
h3cDhcpServer2PoolTable	1.3.6.1.4.1.2011.10.2.122.2.1		not-accessible	A table containing DHCP server pool configurations.
h3cDhcpServer2PoolEntry	1.3.6.1.4.1.2011.10.2.122.2.1.1		not-accessible	An entry containing DHCP server pool configurations.
U32 h3cDhcpServer2PoolIndex	1.3.6.1.4.1.2011.10.2.122.2.1.1.1	Unsigned32	not-accessible	DHCP server pool index.
OCT h3cDhcpServer2PoolName	1.3.6.1.4.1.2011.10.2.122.2.1.1.2	OCTET STRING	read-create	DHCP server pool name. Once this object is created, the value of this object cannot be modified.
OCT h3cDhcpServer2PoolVpnName	1.3.6.1.4.1.2011.10.2.122.2.1.1.3	OCTET STRING	read-create	Name of the VPN instance that the DHCP pool binds to. The value of a zero-length string means the public network. Once this object is created, the value of this object cannot be modified.
ADR h3cDhcpServer2PoolNetwork	1.3.6.1.4.1.2011.10.2.122.2.1.1.4	InetAddressIPv4	read-create	Network address of the primary subnet in a DHCP pool. If the value of this object is set to 0.0.0.0, h3cDhcpServer2PoolNetworkMask is set with 0.0.0.0 automatically.
ADR h3cDhcpServer2PoolNetworkMask	1.3.6.1.4.1.2011.10.2.122.2.1.1.5	InetAddressIPv4	read-create	Network mask of the primary subnet in a DHCP pool. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation.
ADR h3cDhcpServer2PoolStartAddr	1.3.6.1.4.1.2011.10.2.122.2.1.1.6	InetAddressIPv4	read-create	Start IP of an address range of the DHCP pool. If the value of this object is set to 0.0.0.0, h3cDhcpServer2PoolEndAddr is set with 0.0.0.0 automatically. Otherwise h3cDhcpServer2PoolEndAddr must be set with an IP address NOT smaller than the value of this object.
ADR h3cDhcpServer2PoolEndAddr	1.3.6.1.4.1.2011.10.2.122.2.1.1.7	InetAddressIPv4	read-create	End IP of an address range of the DHCP pool, The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolStartAddr together, and any SET operation alone to this object will be regarded as an invalid operation.
I32 h3cDhcpServer2PoolLeaseDay	1.3.6.1.4.1.2011.10.2.122.2.1.1.8	Integer32	read-create	Number of days of the lease. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolLeaseHour, h3cDhcpServer2PoolLeaseMinute, h3cDhcpServer2PoolLeaseSecond together, and any SET operation alone to any of these objects will be regarded as an invalid operation. These objects cannot be set with 0 simultaneously.
I32 h3cDhcpServer2PoolLeaseHour	1.3.6.1.4.1.2011.10.2.122.2.1.1.9	Integer32	read-create	Number of hours of the lease.
I32 h3cDhcpServer2PoolLeaseMinute	1.3.6.1.4.1.2011.10.2.122.2.1.1.10	Integer32	read-create	Number of minutes of the lease.
I32 h3cDhcpServer2PoolLeaseSecond	1.3.6.1.4.1.2011.10.2.122.2.1.1.11	Integer32	read-create	Number of seconds of the lease.
T/F h3cDhcpServer2PoolLeaseUnlimit	1.3.6.1.4.1.2011.10.2.122.2.1.1.12	TruthValue	read-create	A flag denoting whether the lease time of a DHCP pool is unlimited.
TIK h3cDhcpServer2PoolLeaseTime	1.3.6.1.4.1.2011.10.2.122.2.1.1.13	TimeTicks	read-create	The lease time of a DHCP pool in number of timeticks. The value of this object cannot be set to 0 and must be set to 4294967295 or a multiple of 100. If the object is set with 4294967295, the lease time of a DHCP pool is unlimited.
OCT h3cDhcpServer2PoolDomainName	1.3.6.1.4.1.2011.10.2.122.2.1.1.14	OCTET STRING	read-create	Domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the domain name is removed.
OCT h3cDhcpServer2PoolGatewayIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.15	OCTET STRING	read-create	Gateway IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.
OCT h3cDhcpServer2PoolDNSIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.16	OCTET STRING	read-create	DNS server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 DNS server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the DNS address is removed.
ADR h3cDhcpServer2PoolPrimaryDNSIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.17	InetAddressIPv4	read-create	The primary DNS server IP address to be assigned to the client.
ADR h3cDhcpServer2PoolSecondDNSIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.18	InetAddressIPv4	read-create	The secondary DNS server IP address to be assigned to the client.
INT h3cDhcpServer2PoolNetbiosType	1.3.6.1.4.1.2011.10.2.122.2.1.1.19	INTEGER	read-create	NetBios node type for DHCP clients.
OCT h3cDhcpServer2PoolNbnsIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.20	OCTET STRING	read-create	NetBios server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 NetBios server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the NBNS address is removed.
OCT h3cDhcpServer2PoolBootFileName	1.3.6.1.4.1.2011.10.2.122.2.1.1.21	OCTET STRING	read-create	Boot file name for DHCP clients. If the object is set with a zero-length string, the configuration of the boot file name is removed.
ADR h3cDhcpServer2PoolBimsIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.22	InetAddressIPv4	read-create	BIMS server IP address. If the object is set with 0.0.0.0, h3cDhcpServer2PoolBimsPort is set with 0 and h3cDhcpServer2PoolBimsKeyStr is set with a zero-length string automatically. Otherwise h3cDhcpServer2PoolBimsPort and h3cDhcpServer2PoolBimsKeyStr must be set at the same time while h3cDhcpServer2PoolBimsKeyStr must be set with a non-zero length string.
U32 h3cDhcpServer2PoolBimsPort	1.3.6.1.4.1.2011.10.2.122.2.1.1.23	Unsigned32	read-create	BIMS server port number. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolBimsIP and h3cDhcpServer2PoolBimsKeyStr together, and any SET operation alone to this object will be regarded as an invalid operation.
OCT h3cDhcpServer2PoolBimsKeyStr	1.3.6.1.4.1.2011.10.2.122.2.1.1.24	OCTET STRING	read-create	BIMS server key string. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolBimsIP and h3cDhcpServer2PoolBimsPort together, and any SET operation alone to this object will be regarded as an invalid operation.
ADR h3cDhcpServer2PoolNextServer	1.3.6.1.4.1.2011.10.2.122.2.1.1.25	InetAddressIPv4	read-create	Next DHCP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the next server address is removed.
OCT h3cDhcpServer2PoolTftpDomName	1.3.6.1.4.1.2011.10.2.122.2.1.1.26	OCTET STRING	read-create	TFTP server domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the TFTP domain name is removed.
ADR h3cDhcpServer2PoolTftpIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.27	InetAddressIPv4	read-create	TFTP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the TFTP server address is removed.
ADR h3cDhcpServer2PoolVoiceAsIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.28	InetAddressIPv4	read-create	Voice backup server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice backup server IP address is removed.
ADR h3cDhcpServer2PoolVoiceFailIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.29	InetAddressIPv4	read-create	Voice failover IP address for DHCP clients. If the object is set with 0.0.0.0, h3cDhcpServer2PoolVoiceFailStr is set with a zero-length string automatically. Otherwise h3cDhcpServer2PoolVoiceFailStr must be set with a non-zero length string at the same time.
OCT h3cDhcpServer2PoolVoiceFailStr	1.3.6.1.4.1.2011.10.2.122.2.1.1.30	OCTET STRING	read-create	Voice failover dialer string for DHCP clients. The characters in the string must be '0' ~ '9',or '*'. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolVoiceFailIP together, and any SET operation alone to this object will be regarded as an invalid operation.
ADR h3cDhcpServer2PoolVoiceNCPIP	1.3.6.1.4.1.2011.10.2.122.2.1.1.31	InetAddressIPv4	read-create	Voice network calling processing IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice network calling processing IP address is removed.
U32 h3cDhcpServer2PoolVoiceVlanId	1.3.6.1.4.1.2011.10.2.122.2.1.1.32	Unsigned32	read-create	Voice VLAN ID for DHCP clients. If the value of this object is set to 65535, h3cDhcpServer2PoolVoiceVlanEnbl is set with 'false' automatically. Otherwise h3cDhcpServer2PoolVoiceVlanEnbl must also be set.
T/F h3cDhcpServer2PoolVoiceVlanEnbl	1.3.6.1.4.1.2011.10.2.122.2.1.1.33	TruthValue	read-create	Enable status of the specified voice VLAN for DHCP clients. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolVoiceVlanId together, and any SET operation alone to this object will be regarded as an invalid operation.
ROW h3cDhcpServer2PoolRowStatus	1.3.6.1.4.1.2011.10.2.122.2.1.1.34	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
T/F h3cDhcpServer2PoolVerifyClass	1.3.6.1.4.1.2011.10.2.122.2.1.1.35	TruthValue	read-create	Enable the user class verification. When the value of this object is set to 'true', the DHCP server processes packets from DHCP clients in the defined user classes. The user class verification does not apply to packets from DHCP clients with static bindings.
h3cDhcpServer2IfApplyPoolTable	1.3.6.1.4.1.2011.10.2.122.2.2		not-accessible	A table for applying a DHCP pool on interfaces.
h3cDhcpServer2IfApplyPoolEntry	1.3.6.1.4.1.2011.10.2.122.2.2.1		not-accessible	An entry for applying a DHCP pool on the interface.
OCT h3cDhcpServer2IfApplyPoolName	1.3.6.1.4.1.2011.10.2.122.2.2.1.1	OCTET STRING	read-write	The name of the DHCP pool that apply to the interface. If the object is set with a zero-length string, the configuration will be deleted.
h3cDhcpServer2PoolSecNwTable	1.3.6.1.4.1.2011.10.2.122.2.3		not-accessible	A table containing the secondary network configuration of DHCP pools.
h3cDhcpServer2PoolSecNwEntry	1.3.6.1.4.1.2011.10.2.122.2.3.1		not-accessible	An entry containing the objects for configuring the secondary network for DHCP pools.
ADR h3cDhcpServer2PoolSecNw	1.3.6.1.4.1.2011.10.2.122.2.3.1.1	InetAddressIPv4	not-accessible	Network address of the secondary subnets in a DHCP pool.
ADR h3cDhcpServer2PoolSecNwMask	1.3.6.1.4.1.2011.10.2.122.2.3.1.2	InetAddressIPv4	not-accessible	Network mask of the secondary subnets in a DHCP pool.
OCT h3cDhcpServer2PoolSecNwGwIP	1.3.6.1.4.1.2011.10.2.122.2.3.1.3	OCTET STRING	read-create	Gateway IP addresses of the secondary subnets in a DHCP pool. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a secondary network, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.
ROW h3cDhcpServer2PoolSecNwStatus	1.3.6.1.4.1.2011.10.2.122.2.3.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
h3cDhcpServer2PoolClassTable	1.3.6.1.4.1.2011.10.2.122.2.4		not-accessible	A table containing address range of the DHCP server pool for user classes.
h3cDhcpServer2PoolClassEntry	1.3.6.1.4.1.2011.10.2.122.2.4.1		not-accessible	An entry containing address range of DHCP pools for user classes.
OCT h3cDhcpServer2PoolClassName	1.3.6.1.4.1.2011.10.2.122.2.4.1.1	OCTET STRING	not-accessible	User class name.
ADR h3cDhcpServer2PoolClassStart	1.3.6.1.4.1.2011.10.2.122.2.4.1.2	InetAddressIPv4	read-create	Start address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolClassEnd together, and any SET operation alone to this object will be regarded as an invalid operation.
ADR h3cDhcpServer2PoolClassEnd	1.3.6.1.4.1.2011.10.2.122.2.4.1.3	InetAddressIPv4	read-create	End address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET of h3cDhcpServer2PoolClassStart together, and any SET operation alone to this object will be regarded as an invalid operation. This object must be set with an IP address NOT smaller than the value of h3cDhcpServer2PoolClassStart.
ROW h3cDhcpServer2PoolClassStatus	1.3.6.1.4.1.2011.10.2.122.2.4.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolClassStart and h3cDhcpServer2PoolClassEnd must also be set.
h3cDhcpServer2PoolStaticTable	1.3.6.1.4.1.2011.10.2.122.2.5		not-accessible	A table containing the static binding configurations in DHCP pools.
h3cDhcpServer2PoolStaticEntry	1.3.6.1.4.1.2011.10.2.122.2.5.1		not-accessible	An entry containing the objects for configuring the static binding in DHCP pools.
ADR h3cDhcpServer2PoolStaticIP	1.3.6.1.4.1.2011.10.2.122.2.5.1.1	InetAddressIPv4	not-accessible	Ip address of a static binding in a DHCP pool.
ADR h3cDhcpServer2PoolStaticMask	1.3.6.1.4.1.2011.10.2.122.2.5.1.2	InetAddressIPv4	read-create	Network mask of a static binding in a DHCP pool.
OCT h3cDhcpServer2PoolStaticCID	1.3.6.1.4.1.2011.10.2.122.2.5.1.3	OCTET STRING	read-create	Client identifier of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.
OCT h3cDhcpServer2PoolStaticHAddr	1.3.6.1.4.1.2011.10.2.122.2.5.1.4	OCTET STRING	read-create	Hardware address of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.
INT h3cDhcpServer2PoolStaticHType	1.3.6.1.4.1.2011.10.2.122.2.5.1.5	INTEGER	read-create	Hardware type of a DHCP client that the IP address binds to. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2PoolStaticHAddr, and any SET operation alone to this object will be regarded as an invalid operation. 'default' indicates that the hardware type is unknown. If the value of h3cDhcpServer2PoolStaticCID is set to a non-zero length string, the object is set with 'default' automatically. Otherwise it cannot be set with 'default'. 'ethernet' indicates that the hardware type is ethernet. If the value of h3cDhcpServer2PoolStaticHAddr is set with a non-zero length string, the default value of this object is 'ethernet'. 'tokenRing' indicates that the hardware type is token-ring.
ROW h3cDhcpServer2PoolStaticStatus	1.3.6.1.4.1.2011.10.2.122.2.5.1.6	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolStaticCID or (h3cDhcpServer2PoolStaticHardAddr and h3cDhcpServer2PoolStaticHardType) must also be set.
h3cDhcpServer2PoolOptionTable	1.3.6.1.4.1.2011.10.2.122.2.6		not-accessible	A table for configuring user-defined options for DHCP pools.
h3cDhcpServer2PoolOptionEntry	1.3.6.1.4.1.2011.10.2.122.2.6.1		not-accessible	An entry containing the objects for configuring user-defined options for DHCP pools.
I32 h3cDhcpServer2PoolOptCode	1.3.6.1.4.1.2011.10.2.122.2.6.1.1	Integer32	not-accessible	Option code.
INT h3cDhcpServer2PoolOptType	1.3.6.1.4.1.2011.10.2.122.2.6.1.2	INTEGER	read-create	Option type. 'ascii' means using the ascii string that is defined by h3cDhcpServer2PoolOptAscii to fill in the option. 'hex' means using the hex string that is defined by h3cDhcpServer2PoolOptHexStr to fill in the option. 'ip' means using the IP string that is defined by h3cDhcpServer2PoolOptIPStr to fill in the option.
OCT h3cDhcpServer2PoolOptAscii	1.3.6.1.4.1.2011.10.2.122.2.6.1.3	OCTET STRING	read-create	Ascii string of an option. If h3cDhcpServer2PoolOptType is set with 'ascii', this object must be set with a non-zero length string.
OCT h3cDhcpServer2PoolOptHexStr	1.3.6.1.4.1.2011.10.2.122.2.6.1.4	OCTET STRING	read-create	Hex string of an option. The length of the string must be even. If h3cDhcpServer2PoolOptType is set with 'hex', this object must be set with a non-zero length string.
OCT h3cDhcpServer2PoolOptIPStr	1.3.6.1.4.1.2011.10.2.122.2.6.1.5	OCTET STRING	read-create	IP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If h3cDhcpServer2PoolOptType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.
ROW h3cDhcpServer2PoolOptRowStatus	1.3.6.1.4.1.2011.10.2.122.2.6.1.6	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2PoolOptType must also be set.
h3cDhcpServer2PoolForbidTable	1.3.6.1.4.1.2011.10.2.122.2.7		not-accessible	A table for configuring forbidden IP for a DHCP server pool.
h3cDhcpServer2PoolForbidEntry	1.3.6.1.4.1.2011.10.2.122.2.7.1		not-accessible	An entry for configuring forbidden IP for a DHCP server pool.
ADR h3cDhcpServer2PoolForbidIP	1.3.6.1.4.1.2011.10.2.122.2.7.1.1	InetAddressIPv4	not-accessible	Forbidden IP of the DHCP pool.
ROW h3cDhcpServer2PoolForbidStatus	1.3.6.1.4.1.2011.10.2.122.2.7.1.2	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
h3cDhcpServer2ClassTable	1.3.6.1.4.1.2011.10.2.122.2.8		not-accessible	A table for configuring user class to DHCP server.
h3cDhcpServer2ClassEntry	1.3.6.1.4.1.2011.10.2.122.2.8.1		not-accessible	An entry for configuring user class to DHCP server.
OCT h3cDhcpServer2ClassName	1.3.6.1.4.1.2011.10.2.122.2.8.1.1	OCTET STRING	not-accessible	DHCP user class name.
ROW h3cDhcpServer2ClassRowStatus	1.3.6.1.4.1.2011.10.2.122.2.8.1.2	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
h3cDhcpServer2RuleTable	1.3.6.1.4.1.2011.10.2.122.2.9		not-accessible	A table for configuring option rules used to match DHCP users.
h3cDhcpServer2RuleEntry	1.3.6.1.4.1.2011.10.2.122.2.9.1		not-accessible	An entry for configuring option rules used to match DHCP users.
I32 h3cDhcpServer2RuleNumber	1.3.6.1.4.1.2011.10.2.122.2.9.1.1	Integer32	not-accessible	Rule number.
I32 h3cDhcpServer2RuleOptCode	1.3.6.1.4.1.2011.10.2.122.2.9.1.2	Integer32	read-create	Option code.
OCT h3cDhcpServer2RuleOptHexStr	1.3.6.1.4.1.2011.10.2.122.2.9.1.3	OCTET STRING	read-create	Hex string of an option. The length of the string must be even.
OCT h3cDhcpServer2RuleOptMask	1.3.6.1.4.1.2011.10.2.122.2.9.1.4	OCTET STRING	read-create	The mask used to match options. The length of this object must be same with that of h3cDhcpServer2RuleOptHexStr. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptHexStr.
I32 h3cDhcpServer2RuleOptOffset	1.3.6.1.4.1.2011.10.2.122.2.9.1.5	Integer32	read-create	The option offset used to match users. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptHexStr, h3cDhcpServer2RuleOptLength.
I32 h3cDhcpServer2RuleOptLength	1.3.6.1.4.1.2011.10.2.122.2.9.1.6	Integer32	read-create	The option length used to match user options. The SET operation of this object must be with the SET operation of h3cDhcpServer2RuleOptOffset.
ROW h3cDhcpServer2RuleRowStatus	1.3.6.1.4.1.2011.10.2.122.2.9.1.7	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2RuleOptCode must also be set.
h3cDhcpServer2ForbidTable	1.3.6.1.4.1.2011.10.2.122.2.10		not-accessible	A table for configuring forbidden IP range to DHCP server.
h3cDhcpServer2ForbidEntry	1.3.6.1.4.1.2011.10.2.122.2.10.1		not-accessible	An entry for configuring forbidden IP range to DHCP server.
OCT h3cDhcpServer2ForbidVpnName	1.3.6.1.4.1.2011.10.2.122.2.10.1.1	OCTET STRING	not-accessible	Name of the VPN instance that the forbidden IP range binds to. If the value of this object is 0x1, the network that the forbidden IP range belongs to is the public network.
ADR h3cDhcpServer2ForbidStart	1.3.6.1.4.1.2011.10.2.122.2.10.1.2	InetAddressIPv4	not-accessible	Start IP of forbidden IP range.
ADR h3cDhcpServer2ForbidEnd	1.3.6.1.4.1.2011.10.2.122.2.10.1.3	InetAddressIPv4	not-accessible	End IP of forbidden IP range.
ROW h3cDhcpServer2ForbidRowStatus	1.3.6.1.4.1.2011.10.2.122.2.10.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
h3cDhcpServer2FreeTable	1.3.6.1.4.1.2011.10.2.122.2.11		not-accessible	A table for displaying free IP range for DHCP server.
h3cDhcpServer2FreeEntry	1.3.6.1.4.1.2011.10.2.122.2.11.1		not-accessible	An entry for displaying free IP range for DHCP server.
ADR h3cDhcpServer2FreeStart	1.3.6.1.4.1.2011.10.2.122.2.11.1.1	InetAddressIPv4	not-accessible	Start IP of free IP range.
ADR h3cDhcpServer2FreeEnd	1.3.6.1.4.1.2011.10.2.122.2.11.1.2	InetAddressIPv4	read-only	End IP of free IP range.
h3cDhcpServer2ConflictTable	1.3.6.1.4.1.2011.10.2.122.2.12		not-accessible	A table for displaying the information of conflict IP for DHCP server.
h3cDhcpServer2ConflictEntry	1.3.6.1.4.1.2011.10.2.122.2.12.1		not-accessible	An entry for displaying the information of conflict IP for DHCP server.
ADR h3cDhcpServer2ConflictIP	1.3.6.1.4.1.2011.10.2.122.2.12.1.1	InetAddressIPv4	not-accessible	Conflict IP.
INT h3cDhcpServer2ConflictType	1.3.6.1.4.1.2011.10.2.122.2.12.1.2	INTEGER	read-only	Type of the detection of conflict IP. 'detectByServer' denotes that the conflict is detected by DHCP server. 'detectByClient' denotes that the conflict is detected by DHCP client.
OCT h3cDhcpServer2ConflictTime	1.3.6.1.4.1.2011.10.2.122.2.12.1.3	OCTET STRING	read-only	Time when the conflict is detected. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
ROW h3cDhcpServer2ConflictRowStatus	1.3.6.1.4.1.2011.10.2.122.2.12.1.4	RowStatus	read-create	RowStatus. Only destroy action is allow to use.
h3cDhcpServer2ExpiredTable	1.3.6.1.4.1.2011.10.2.122.2.13		not-accessible	A table for displaying the information of expired IP for DHCP Server pools.
h3cDhcpServer2ExpiredEntry	1.3.6.1.4.1.2011.10.2.122.2.13.1		not-accessible	An entry of objects for displaying information of expired IP for DHCP server pools.
ADR h3cDhcpServer2ExpiredIP	1.3.6.1.4.1.2011.10.2.122.2.13.1.1	InetAddressIPv4	not-accessible	Expired IP address.
OCT h3cDhcpServer2ExpiredClientId	1.3.6.1.4.1.2011.10.2.122.2.13.1.2	OCTET STRING	read-only	Client identifier or hardware address.
OCT h3cDhcpServer2ExpiredTime	1.3.6.1.4.1.2011.10.2.122.2.13.1.3	OCTET STRING	read-only	Expired time. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
ROW h3cDhcpServer2ExpiredRowStatus	1.3.6.1.4.1.2011.10.2.122.2.13.1.4	RowStatus	read-create	RowStatus. Only destroy action is allow to use.
h3cDhcpServer2IPInUseTable	1.3.6.1.4.1.2011.10.2.122.2.14		not-accessible	A table for displaying the information of IP in use for DHCP Server pools.
h3cDhcpServer2IPInUseEntry	1.3.6.1.4.1.2011.10.2.122.2.14.1		not-accessible	An entry of objects for displaying information of IP in use for DHCP server pools.
ADR h3cDhcpServer2IPInUseIP	1.3.6.1.4.1.2011.10.2.122.2.14.1.1	InetAddressIPv4	not-accessible	Ip address in use.
OCT h3cDhcpServer2IPInUseClientId	1.3.6.1.4.1.2011.10.2.122.2.14.1.2	OCTET STRING	read-only	Client identifier.
OCT h3cDhcpServer2IPInUseHardAddr	1.3.6.1.4.1.2011.10.2.122.2.14.1.3	OCTET STRING	read-only	Hardware address.
INT h3cDhcpServer2IPInUseHardType	1.3.6.1.4.1.2011.10.2.122.2.14.1.4	INTEGER	read-only	Hardware address type.
U32 h3cDhcpServer2IPInUseVlanId	1.3.6.1.4.1.2011.10.2.122.2.14.1.5	Unsigned32	read-only	User's VLAN ID. 65535 means that a client doesn't have VLAN ID or have an invalid VLAN ID.
OCT h3cDhcpServer2IPInUseEndLease	1.3.6.1.4.1.2011.10.2.122.2.14.1.6	OCTET STRING	read-only	End time of lease. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
INT h3cDhcpServer2IPInUseType	1.3.6.1.4.1.2011.10.2.122.2.14.1.7	INTEGER	read-only	Type of binding.
NUM h3cDhcpServer2IPInUseIfIndex	1.3.6.1.4.1.2011.10.2.122.2.14.1.8	InterfaceIndexOrZero	read-only	Interface index information. If the value of this object is zero, the interface is unknown.
ROW h3cDhcpServer2IPInUseRowStatus	1.3.6.1.4.1.2011.10.2.122.2.14.1.9	RowStatus	read-create	RowStatus. Only destroy action is allow to use.
h3cDhcpServer2DefOptGrpTable	1.3.6.1.4.1.2011.10.2.122.2.15		not-accessible	A table containing option group of the DHCP server pool for user classes.
h3cDhcpServer2DefOptGrpEntry	1.3.6.1.4.1.2011.10.2.122.2.15.1		not-accessible	An entry containing option group of DHCP pools for user classes.
OCT h3cDhcpServer2DefOptGrpClass	1.3.6.1.4.1.2011.10.2.122.2.15.1.1	OCTET STRING	not-accessible	User class name.
I32 h3cDhcpServer2DefOptGrpId	1.3.6.1.4.1.2011.10.2.122.2.15.1.2	Integer32	read-create	The option group ID.
ROW h3cDhcpServer2DefOptGrpStatus	1.3.6.1.4.1.2011.10.2.122.2.15.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2DefOptGrpId must also be set.
h3cDhcpServer2ValidClassTable	1.3.6.1.4.1.2011.10.2.122.2.16		not-accessible	A table containing valid user classes for DHCP server pool.
h3cDhcpServer2ValidClassEntry	1.3.6.1.4.1.2011.10.2.122.2.16.1		not-accessible	An entry containing valid user classes for DHCP server pool.
OCT h3cDhcpServer2ValidClassName	1.3.6.1.4.1.2011.10.2.122.2.16.1.1	OCTET STRING	not-accessible	User class name.
ROW h3cDhcpServer2ValidClassStatus	1.3.6.1.4.1.2011.10.2.122.2.16.1.2	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
h3cDhcpServer2RuleHwAddrTable	1.3.6.1.4.1.2011.10.2.122.2.17		not-accessible	A table for configuring hardware address rules used to match DHCP users.
h3cDhcpServer2RuleHwAddrEntry	1.3.6.1.4.1.2011.10.2.122.2.17.1		not-accessible	An entry for configuring hardware address rules used to match DHCP users.
I32 h3cDhcpServer2RuleHwAddrNumber	1.3.6.1.4.1.2011.10.2.122.2.17.1.1	Integer32	not-accessible	Rule number.
OCT h3cDhcpServer2RuleHwAddress	1.3.6.1.4.1.2011.10.2.122.2.17.1.2	OCTET STRING	read-create	Hardware address for a rule. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2RuleHwAddrMask together, and any SET operation alone to this object will be regarded as an invalid operation.
OCT h3cDhcpServer2RuleHwAddrMask	1.3.6.1.4.1.2011.10.2.122.2.17.1.3	OCTET STRING	read-create	Mask of hardware address for a rule. The structure of the OCTET STRING is the same with h3cDhcpServer2RuleHwAddress. The SET operation to this object ought to be with the SET operation of h3cDhcpServer2RuleHwAddress together, and any SET operation alone to this object will be regarded as an invalid operation.
I32 h3cDhcpServer2RuleHwAddrType	1.3.6.1.4.1.2011.10.2.122.2.17.1.4	Integer32	read-create	Hardware type for a rule. The codes of all hardware types see ARP section in RFC 1700. The SET operation alone to this object will be regarded as an invalid operation.
ROW h3cDhcpServer2RuleHwAddrStatus	1.3.6.1.4.1.2011.10.2.122.2.17.1.5	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2RuleHwAddrAddress and h3cDhcpServer2RuleHwAddrMask must also be set.
h3cDhcpServer2OptionGroupTable	1.3.6.1.4.1.2011.10.2.122.2.18		not-accessible	A table for creating DHCP server option groups.
h3cDhcpServer2OptionGroupEntry	1.3.6.1.4.1.2011.10.2.122.2.18.1		not-accessible	An entry containing objects for creating or deleting an option group.
I32 h3cDhcpServer2OptionGroupId	1.3.6.1.4.1.2011.10.2.122.2.18.1.1	Integer32	not-accessible	The option group ID.
ROW h3cDhcpServer2OptionGroupStatus	1.3.6.1.4.1.2011.10.2.122.2.18.1.2	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy.
h3cDhcpServer2OptionTable	1.3.6.1.4.1.2011.10.2.122.2.19		not-accessible	A table for configuring options in an option group.
h3cDhcpServer2OptionEntry	1.3.6.1.4.1.2011.10.2.122.2.19.1		not-accessible	An entry containing objects for configuring an option in an option group.
I32 h3cDhcpServer2OptionCode	1.3.6.1.4.1.2011.10.2.122.2.19.1.1	Integer32	not-accessible	Option code.
INT h3cDhcpServer2OptionType	1.3.6.1.4.1.2011.10.2.122.2.19.1.2	INTEGER	read-create	Option type. 'ascii' means using the ascii string that is defined by h3cDhcpServer2OptionAscii to fill in the option. 'hex' means using the hex string that is defined by h3cDhcpServer2OptionHexStr to fill in the option. 'ip' means using the IP string that is defined by h3cDhcpServer2OptionIPStr to fill in the option.
OCT h3cDhcpServer2OptionAscii	1.3.6.1.4.1.2011.10.2.122.2.19.1.3	OCTET STRING	read-create	Ascii string of an option. If h3cDhcpServer2OptionType is set with 'ascii', this object must be set with a non-zero length string.
OCT h3cDhcpServer2OptionHexStr	1.3.6.1.4.1.2011.10.2.122.2.19.1.4	OCTET STRING	read-create	Hex string of an option. The length of the string must be even. If h3cDhcpServer2OptionType is set with 'hex', this object must be set with a non-zero length string.
OCT h3cDhcpServer2OptionIPStr	1.3.6.1.4.1.2011.10.2.122.2.19.1.5	OCTET STRING	read-create	IP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If h3cDhcpServer2OptionType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.
ROW h3cDhcpServer2OptionRowStatus	1.3.6.1.4.1.2011.10.2.122.2.19.1.6	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', h3cDhcpServer2OptionType must also be set.
h3cDhcpRelay2ScalarObjects	1.3.6.1.4.1.2011.10.2.122.3
h3cDhcpRelay2ConfigGroup	1.3.6.1.4.1.2011.10.2.122.3.1
T/F h3cDhcpRelay2UserInfoRecord	1.3.6.1.4.1.2011.10.2.122.3.1.1	TruthValue	read-write	If the value is 'true', user information will be recorded.
T/F h3cDhcpRelay2UserInfoRefresh	1.3.6.1.4.1.2011.10.2.122.3.1.2	TruthValue	read-write	If the value is 'true', user information will be refreshed on timer.
U32 h3cDhcpRelay2UserInfoFlushTime	1.3.6.1.4.1.2011.10.2.122.3.1.3	Unsigned32	read-write	User information refresh interval in seconds. If the value of the object is set to 0, the interval is calculated automatically by the number of user information entries.
OCT h3cDhcpRelay2ReleaseAddr	1.3.6.1.4.1.2011.10.2.122.3.1.4	OCTET STRING	read-write	User address to be released. The structure of the OCTET STRING is IP address:VPN name. If the VPN instance name is NOT specified, the IP address is in public network.
h3cDhcpRelay2StatisticsGroup	1.3.6.1.4.1.2011.10.2.122.3.2
C64 h3cDhcpRelay2RxClientNum	1.3.6.1.4.1.2011.10.2.122.3.2.1	Counter64	read-only	The total number of the packets received from DHCP clients by DHCP relay.
C64 h3cDhcpRelay2TxClientNum	1.3.6.1.4.1.2011.10.2.122.3.2.2	Counter64	read-only	The total number of the packets transmitted to DHCP clients by DHCP relay.
C64 h3cDhcpRelay2RxServerNum	1.3.6.1.4.1.2011.10.2.122.3.2.3	Counter64	read-only	The total number of the packets received from DHCP Servers by DHCP relay.
C64 h3cDhcpRelay2TxServerNum	1.3.6.1.4.1.2011.10.2.122.3.2.4	Counter64	read-only	The total number of the packets transmitted to DHCP Servers by DHCP relay.
C64 h3cDhcpRelay2BadNum	1.3.6.1.4.1.2011.10.2.122.3.2.5	Counter64	read-only	The total number of the bad packets received.
C64 h3cDhcpRelay2BootpRequestNum	1.3.6.1.4.1.2011.10.2.122.3.2.6	Counter64	read-only	The total number of the BOOTREQUEST packets handled by DHCP relay.
C64 h3cDhcpRelay2DiscoverNum	1.3.6.1.4.1.2011.10.2.122.3.2.7	Counter64	read-only	The total number of the DHCPDISCOVER packets handled by DHCP relay.
C64 h3cDhcpRelay2RequestNum	1.3.6.1.4.1.2011.10.2.122.3.2.8	Counter64	read-only	The total number of the DHCPREQUEST packets handled by DHCP relay.
C64 h3cDhcpRelay2DeclineNum	1.3.6.1.4.1.2011.10.2.122.3.2.9	Counter64	read-only	The total number of the DHCPDECLINE packets handled by DHCP relay.
C64 h3cDhcpRelay2ReleaseNum	1.3.6.1.4.1.2011.10.2.122.3.2.10	Counter64	read-only	The total number of the DHCPRELEASE packets handled by DHCP relay.
C64 h3cDhcpRelay2InformNum	1.3.6.1.4.1.2011.10.2.122.3.2.11	Counter64	read-only	The total number of the DHCPINFORM packets handled by DHCP relay.
C64 h3cDhcpRelay2BootpReplyNum	1.3.6.1.4.1.2011.10.2.122.3.2.12	Counter64	read-only	The total number of the BOOTREPLY packets handled by DHCP relay.
C64 h3cDhcpRelay2OfferNum	1.3.6.1.4.1.2011.10.2.122.3.2.13	Counter64	read-only	The total number of the DHCPOFFER packets handled by DHCP relay.
C64 h3cDhcpRelay2AckNum	1.3.6.1.4.1.2011.10.2.122.3.2.14	Counter64	read-only	The total number of the DHCPACK packets handled by DHCP relay.
C64 h3cDhcpRelay2NakNum	1.3.6.1.4.1.2011.10.2.122.3.2.15	Counter64	read-only	The total number of the DHCPNAK packets handled by DHCP relay.
h3cDhcpRelay2Tables	1.3.6.1.4.1.2011.10.2.122.4
h3cDhcpRelay2IfConfigTable	1.3.6.1.4.1.2011.10.2.122.4.1		not-accessible	A table for configuring relay functions for interfaces.
h3cDhcpRelay2IfConfigEntry	1.3.6.1.4.1.2011.10.2.122.4.1.1		not-accessible	An entry for configuring relay functions for an interface.
T/F h3cDhcpRelay2IfSelectRelay	1.3.6.1.4.1.2011.10.2.122.4.1.1.1	TruthValue	read-write	If the value is 'true', the DHCP relay function would be enabled on this interface.
T/F h3cDhcpRelay2IfCheckMac	1.3.6.1.4.1.2011.10.2.122.4.1.1.2	TruthValue	read-write	If the value is 'true', the function of checking MAC address of packets received from the interface would be enabled.
T/F h3cDhcpRelay2IfOpt82Enable	1.3.6.1.4.1.2011.10.2.122.4.1.1.3	TruthValue	read-write	If DHCP relay supports option 82 functions, the value is 'true'. If DHCP relay does NOT support option 82 functions, the value is 'false'.
INT h3cDhcpRelay2IfOpt82Strategy	1.3.6.1.4.1.2011.10.2.122.4.1.1.4	INTEGER	read-write	The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
INT h3cDhcpRelay2IfOpt82CIDMode	1.3.6.1.4.1.2011.10.2.122.4.1.1.5	INTEGER	read-write	The mode of the circuit ID suboption of DHCP option 82. 'normal' is the standard mode. 'verbose' is the detailed mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', h3cDhcpRelay2IfOpt82CIDStr must also be set.
INT h3cDhcpRelay2IfOpt82CIDNodeType	1.3.6.1.4.1.2011.10.2.122.4.1.1.6	INTEGER	read-write	Type of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of h3cDhcpRelay2IfOpt82CIDMode is set to 'verbose'. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode. 'invalid' indicates that the node identifier is NOT used to fill in the circuit ID suboption of option 82. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'verbose', the value of this object is set to 'invalid' automatically. Otherwise the value of this object cannot be set to 'invalid'. 'mac' indicates that the node identifier is filled in with the MAC of DHCP relay input interface. If the value of h3cDhcpRelay2IfOpt82CIDMode is set to 'verbose', the default value of this object is 'mac'. 'sysname' indicates that the node identifier is filled in with the sysname of the DHCP relay device. 'userDefine' indicates that the node identifier is filled in with the string defined by the object of h3cDhcpRelay2IfOpt82CIDNodeStr. If the value is set to 'userDefine', the value of h3cDhcpRelay2IfOpt82CIDNodeStr must be set to a non-zero length string simultaneously.
OCT h3cDhcpRelay2IfOpt82CIDNodeStr	1.3.6.1.4.1.2011.10.2.122.4.1.1.7	OCTET STRING	read-write	The string defined by user to fill in the node identifier in the verbose mode. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'verbose', or the value of h3cDhcpRelay2IfOpt82CIDNodeType is NOT 'userDefine', it is set with a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode and h3cDhcpRelay2IfOpt82CIDNodeType.
OCT h3cDhcpRelay2IfOpt82CIDStr	1.3.6.1.4.1.2011.10.2.122.4.1.1.8	OCTET STRING	read-write	The string defined by user to fill in the circuit ID suboption of option 82 in the user-define mode. If the value of h3cDhcpRelay2IfOpt82CIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode.
INT h3cDhcpRelay2IfOpt82CIDFormat	1.3.6.1.4.1.2011.10.2.122.4.1.1.9	INTEGER	read-write	The format of the circuit ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. 'undefine' is the undefine format. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'normal', the value of this object is set to 'hex' automatically and cannot be set to 'undefine'. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'verbose', the default value of this object is 'undefine'. If the value of h3cDhcpRelay2IfOpt82CIDMode is 'userDefine', the value of this object is set to 'ascii' automatically and cannot be set to other value. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82CIDMode.
INT h3cDhcpRelay2IfOpt82RIDMode	1.3.6.1.4.1.2011.10.2.122.4.1.1.10	INTEGER	read-write	The mode of the remote ID suboption of DHCP option 82. 'normal' is the standard mode. 'sysname' is the sysname mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', h3cDhcpRelay2IfOpt82RIDStr must also be set.
OCT h3cDhcpRelay2IfOpt82RIDStr	1.3.6.1.4.1.2011.10.2.122.4.1.1.11	OCTET STRING	read-write	The string defined by user to fill in the remote ID in the user-defined mode. If the value of h3cDhcpRelay2IfOpt82RIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82RIDMode.
INT h3cDhcpRelay2IfOpt82RIDFormat	1.3.6.1.4.1.2011.10.2.122.4.1.1.12	INTEGER	read-write	The format of the remote ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. If the value of h3cDhcpRelay2IfOpt82RIDMode is 'sysname' or 'userDefine', this object is set with 'ascii' automatically and cannot be set with other value. If the value of h3cDhcpRelay2IfOpt82RIDMode is 'normal', the default value of this object is 'hex'. The SET operation of this object must be with the SET operation of h3cDhcpRelay2IfOpt82RIDMode.
h3cDhcpRelay2SrvAddrTable	1.3.6.1.4.1.2011.10.2.122.4.2		not-accessible	A table for configuring a DHCP server address on the interface.
h3cDhcpRelay2SrvAddrEntry	1.3.6.1.4.1.2011.10.2.122.4.2.1		not-accessible	An entry for configuring a DHCP server address on the interface.
ADR h3cDhcpRelay2SrvAddrIP	1.3.6.1.4.1.2011.10.2.122.4.2.1.1	InetAddressIPv4	not-accessible	Ip address of DHCP server.
ROW h3cDhcpRelay2SrvAddrRowStatus	1.3.6.1.4.1.2011.10.2.122.4.2.1.2	RowStatus	read-create	Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
h3cDhcpRelay2UserInfoTable	1.3.6.1.4.1.2011.10.2.122.4.3		not-accessible	A table containing the user information of DHCP client.
h3cDhcpRelay2UserInfoEntry	1.3.6.1.4.1.2011.10.2.122.4.3.1		not-accessible	An entry containing the user information of DHCP client.
U32 h3cDhcpRelay2UserInfoVpnIndex	1.3.6.1.4.1.2011.10.2.122.4.3.1.1	Unsigned32	not-accessible	VPN index of the DHCP client.
ADR h3cDhcpRelay2UserInfoIpAddr	1.3.6.1.4.1.2011.10.2.122.4.3.1.2	InetAddressIPv4	not-accessible	DHCP client's IP address.
MAC h3cDhcpRelay2UserInfoMacAddr	1.3.6.1.4.1.2011.10.2.122.4.3.1.3	MacAddress	read-only	DHCP client's MAC address.
NUM h3cDhcpRelay2UserInfoIfIndex	1.3.6.1.4.1.2011.10.2.122.4.3.1.4	InterfaceIndexOrZero	read-only	The index of the interface that DHCP client adhered to. 0 means that no interface information is recorded in the user information entry.
ROW h3cDhcpRelay2UserInfoRowStatus	1.3.6.1.4.1.2011.10.2.122.4.3.1.5	RowStatus	read-create	Operation status of this table entry. Only destroy action is allow to use.

RFC description

H3C DHCPv4 server and relay management including address allocation and configuration.

Start monitoring H3C router/switch (DHCPv4 server/relay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-DHCP4-MIB

What Is H3C-DHCP4-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description