All MIBs › GESINGLEUPS-MIB › upsConfigAudibleStatusgen
upsConfigAudibleStatusgen
Module: GESINGLEUPS-MIB
OID (symbolic): GESINGLEUPS-MIB::upsConfigAudibleStatusgen
OID (numeric): 1.3.6.1.4.1.818.1.1.10.9.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The requested state of the audible alarm. When in the disabled state, the audible alarm should never sound. The enabled state is self-describing. Setting this object to muted(3) when the audible alarm is sounding shall temporarily silence the alarm. It will remain muted until it would normally stop sounding and the value returned for read operations during this period shall equal muted(3). At the end of this period, the value shall revert to enabled(2). Writes of the value muted(3) when the audible alarm is not sounding shall be accepted but otherwise shall have no effect.(*)
What is upsConfigAudibleStatusgen?
Controls the UPS's audible alarm: disabled silences it permanently, enabled lets it sound normally, and muted temporarily silences an alarm that is currently sounding until it would have stopped on its own, after which it reverts to enabled. Setting 'muted' while no alarm is sounding is accepted but has no immediate effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.1.1.10.9.8 snmpwalk -v2c -c public <target> GESINGLEUPS-MIB::upsConfigAudibleStatusgen
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.818.1.1.10.9.8.1 snmpget -v2c -c public <target> GESINGLEUPS-MIB::upsConfigAudibleStatusgen.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.818.1.1.10.9.8.1 i <value>
Start monitoring GE Digital Energy single-unit UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GESINGLEUPS-MIB::upsConfigAudibleStatusgen OID value, configure state conditions and alerts, and monitor any GE Digital Energy single-unit UPS system from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.818 | imv | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1 | geHardware | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1 | geUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.10 | geGenericUPS | GE-PARALLELUPS |
| 1.3.6.1.4.1.818.1.1.10.9 | upsConfig_gen | GE-PARALLELUPS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.818.1.1.10.9.8 | upsConfigAudibleStatusgen | GESINGLEUPS-MIB |