GESINGLEUPS-MIB :: upsAutoRestartgen

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › GESINGLEUPS-MIB › upsAutoRestartgen

upsAutoRestartgen

Module: GESINGLEUPS-MIB

OID (symbolic): GESINGLEUPS-MIB::upsAutoRestartgen

OID (numeric): 1.3.6.1.4.1.818.1.1.10.8.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this object to 'on' will cause the UPS system to restart after a shutdown if the shutdown occurred during a power loss as a result of either a upsShutdownAfterDelay or an internal battery depleted condition. Setting this object to 'off' will prevent the UPS system from restarting after a shutdown until an operator manually or remotely explicitly restarts it. If the UPS is in a startup or reboot countdown, then the UPS will not restart until that delay has been satisfied.(*)

What is upsAutoRestartgen?

Controls whether the UPS automatically powers back on after a shutdown that occurred during a power loss (either from a upsShutdownAfterDelaygen countdown or a depleted battery): 'on' lets it restart unattended when power returns, while 'off' requires an operator to manually restart it. This is commonly turned off in unattended sites where an operator must first verify it's safe to re-energize equipment.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.818.1.1.10.8.5
snmpwalk -v2c -c public <target> GESINGLEUPS-MIB::upsAutoRestartgen

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.818.1.1.10.8.5.1
snmpget -v2c -c public <target> GESINGLEUPS-MIB::upsAutoRestartgen.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.818.1.1.10.8.5.1 i <value>

Start monitoring GE Digital Energy single-unit UPS system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GESINGLEUPS-MIB::upsAutoRestartgen OID value, configure state conditions and alerts, and monitor any GE Digital Energy single-unit UPS system from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.818imvGE-PARALLELUPS
1.3.6.1.4.1.818.1geHardwareGE-PARALLELUPS
1.3.6.1.4.1.818.1.1geUPSGE-PARALLELUPS
1.3.6.1.4.1.818.1.1.10geGenericUPSGE-PARALLELUPS
1.3.6.1.4.1.818.1.1.10.8upsControl_genGE-PARALLELUPS
Numeric OIDNameModule
1.3.6.1.4.1.818.1.1.10.8.5upsAutoRestartgenGESINGLEUPS-MIB