G6-RMON-MIB

All MIBs › G6-RMON-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Network Monitoring (RMON), Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for RMON-based traffic statistics collection and threshold monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-RMON-MIB?

G6-RMON-MIB is a MICROSENS private MIB for its Generation 6 Ethernet switch family, providing RMON-style per-port traffic statistics and reset control. It exposes an ingressTable keyed by port index with counters for good and bad ingress octets, total packets, unicast, non-unicast, and broadcast frames, plus a global counter-clear control. This is fundamentally a performance/traffic monitoring MIB used to assess the operational health of each switch port: a rising ingressInBadOctets count on a port points to a physical-layer or cabling problem, while sudden spikes in ingressInBroadcasts can indicate a broadcast storm or loop on that segment. It parallels the structure of the standard IETF RMON MIB (RFC 2819) though implemented as a vendor-specific table rather than the standard one. It is deployed for per-port traffic health monitoring across fleets of MICROSENS G6 Ethernet switches. Network engineers evaluating or troubleshooting this functionality can download the G6-RMON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-RMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6 Generation 6 Ethernet switch

Monitoring Examples

A network engineer would poll the ingressTable per ingressPortIndex, watching ingressInGoodOctetsLo/Hi and ingressInTotalPackets to trend normal traffic load, and ingressInBadOctets to catch physical errors. A sustained rise in ingressInBroadcasts or ingressInNonUnicasts on one port relative to others would point to a broadcast storm, misbehaving device, or a switching loop on that segment, and rmonClearAllCounter would be used to reset the baseline after remediation.

What Can Be Monitored

ingress good/bad octet counts per port
ingress total packet count per port
unicast vs non-unicast/broadcast packet counts
per-port counter reset state

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
device	1.3.6.1.4.1.3181.10.6.1			Microsens private MIB for Generation 6 Ethernet Switches
rmon	1.3.6.1.4.1.3181.10.6.1.85
STR rmonClearAllCounter	1.3.6.1.4.1.3181.10.6.1.85.1	DisplayString	read-write	When executed all rmon counters of all ports are reset to 0. This has no service implications.
ingressTable	1.3.6.1.4.1.3181.10.6.1.85.100		not-accessible	Statistics regarding inbound traffic
ingressEntry	1.3.6.1.4.1.3181.10.6.1.85.100.1		not-accessible
INT ingressPortIndex	1.3.6.1.4.1.3181.10.6.1.85.100.1.1	INTEGER	not-accessible	Automatically generated
INT ingressEntryStatus	1.3.6.1.4.1.3181.10.6.1.85.100.1.2	INTEGER	read-only	Indicated whether this ports table is updated and valid.
U32 ingressInGoodOctetsLo	1.3.6.1.4.1.3181.10.6.1.85.100.1.3	Unsigned32	read-only	Number of bytes received without error (low)
U32 ingressInGoodOctetsHi	1.3.6.1.4.1.3181.10.6.1.85.100.1.4	Unsigned32	read-only	Number of bytes received without error (high)
U32 ingressInBadOctets	1.3.6.1.4.1.3181.10.6.1.85.100.1.5	Unsigned32	read-only	Number of bytes received with error.
U32 ingressInTotalPackets	1.3.6.1.4.1.3181.10.6.1.85.100.1.6	Unsigned32	read-only	Number of packets on any type received.
U32 ingressInUnicasts	1.3.6.1.4.1.3181.10.6.1.85.100.1.7	Unsigned32	read-only	Number of unicast packets received.
U32 ingressInNonUnicasts	1.3.6.1.4.1.3181.10.6.1.85.100.1.8	Unsigned32	read-only	Number of packets which are non unicast type.
U32 ingressInBroadcasts	1.3.6.1.4.1.3181.10.6.1.85.100.1.9	Unsigned32	read-only	Number of broadcast packets received.
U32 ingressInMulticasts	1.3.6.1.4.1.3181.10.6.1.85.100.1.10	Unsigned32	read-only	Number of multicast packets received.
U32 ingressInPause	1.3.6.1.4.1.3181.10.6.1.85.100.1.11	Unsigned32	read-only	Number of pause frames received.
U32 ingressInTotalReceiveErrors	1.3.6.1.4.1.3181.10.6.1.85.100.1.12	Unsigned32	read-only	Number of packets received with any kind of error.
U32 ingressInUndersize	1.3.6.1.4.1.3181.10.6.1.85.100.1.13	Unsigned32	read-only	Number of undersized frames received.
U32 ingressInOversize	1.3.6.1.4.1.3181.10.6.1.85.100.1.14	Unsigned32	read-only	Number of oversizeded frames received.
U32 ingressInFragments	1.3.6.1.4.1.3181.10.6.1.85.100.1.15	Unsigned32	read-only	Number of fragmented frames received.
U32 ingressInJabber	1.3.6.1.4.1.3181.10.6.1.85.100.1.16	Unsigned32	read-only	Number of jabbers received.
U32 ingressInFcsErrors	1.3.6.1.4.1.3181.10.6.1.85.100.1.17	Unsigned32	read-only	Number of checksum errors.
U32 ingressInDiscarded	1.3.6.1.4.1.3181.10.6.1.85.100.1.18	Unsigned32	read-only	Number of frames discard due to lack of internal buffer space.
egressTable	1.3.6.1.4.1.3181.10.6.1.85.101		not-accessible	Statistics regarding outbound traffic
egressEntry	1.3.6.1.4.1.3181.10.6.1.85.101.1		not-accessible
INT egressPortIndex	1.3.6.1.4.1.3181.10.6.1.85.101.1.1	INTEGER	not-accessible	Automatically generated
U32 egressOutGoodOctetsLo	1.3.6.1.4.1.3181.10.6.1.85.101.1.2	Unsigned32	read-only	Number of bytes transmitted without error (low)
U32 egressOutGoodOctetsHi	1.3.6.1.4.1.3181.10.6.1.85.101.1.3	Unsigned32	read-only	Number of bytes transmitted without error (high)
U32 egressOutUnicasts	1.3.6.1.4.1.3181.10.6.1.85.101.1.4	Unsigned32	read-only	Number of unicast packets transmitted
U32 egressOutNonUnicasts	1.3.6.1.4.1.3181.10.6.1.85.101.1.5	Unsigned32	read-only	Number of packets which are non unicast type
U32 egressOutBroadcasts	1.3.6.1.4.1.3181.10.6.1.85.101.1.6	Unsigned32	read-only	Number of broadcast packets transmitted
U32 egressOutMulticasts	1.3.6.1.4.1.3181.10.6.1.85.101.1.7	Unsigned32	read-only	Number of multicast packets transmitted
U32 egressOutPause	1.3.6.1.4.1.3181.10.6.1.85.101.1.8	Unsigned32	read-only	Number of pause frames transmitted
U32 egressOutDeferred	1.3.6.1.4.1.3181.10.6.1.85.101.1.9	Unsigned32	read-only	Number of deferred frames due to a busy condition. This is not an error condition.
U32 egressOutTotalCollisions	1.3.6.1.4.1.3181.10.6.1.85.101.1.10	Unsigned32	read-only	Number of all collisions that have occurred on that port. A collision may occure on a half-duplex interface detecting an incoming packet at the time it was trying to transmit a packet.
U32 egressOutSingleCollisions	1.3.6.1.4.1.3181.10.6.1.85.101.1.11	Unsigned32	read-only	Number of times the port has experienced a single collision when attempting to transmit a packet.
U32 egressOutMultipleCollisions	1.3.6.1.4.1.3181.10.6.1.85.101.1.12	Unsigned32	read-only	Number of times the port has experienced a multiple collision when attempting to transmit a packet.
U32 egressOutExcessiveCollisions	1.3.6.1.4.1.3181.10.6.1.85.101.1.13	Unsigned32	read-only	Number of times a packet could not be sent due to repeated collisions on the same packet..
U32 egressOutLateCollisions	1.3.6.1.4.1.3181.10.6.1.85.101.1.14	Unsigned32	read-only	Number of times a late collision has occured. A late collision occurs when the switch detects an incoming packet after it has already transmitted more than 64 bytes of its current outgoing packet. This indicates a half duplex - full duplex mismatch.
U32 egressOutFcsErrors	1.3.6.1.4.1.3181.10.6.1.85.101.1.15	Unsigned32	read-only	Number of checksum errors
U32 egressOutDroppedPackets	1.3.6.1.4.1.3181.10.6.1.85.101.1.16	Unsigned32	read-only	Number of good outgoing frames that were dropped due to outgoing policies
histogramTable	1.3.6.1.4.1.3181.10.6.1.85.102		not-accessible	The histogram indicates the packet size distribution for incoming data per port.
histogramEntry	1.3.6.1.4.1.3181.10.6.1.85.102.1		not-accessible
INT histogramPortIndex	1.3.6.1.4.1.3181.10.6.1.85.102.1.1	INTEGER	not-accessible	Automatically generated
U32 histogramIn64Octets	1.3.6.1.4.1.3181.10.6.1.85.102.1.2	Unsigned32	read-only	Number of minimum size frames received
U32 histogramIn65To127Octets	1.3.6.1.4.1.3181.10.6.1.85.102.1.3	Unsigned32	read-only	Number of frames with size between 65 and 127 bytes received
U32 histogramIn128To255Octets	1.3.6.1.4.1.3181.10.6.1.85.102.1.4	Unsigned32	read-only	Number of frames with size between 128 and 255 bytes received
U32 histogramIn256To511Octets	1.3.6.1.4.1.3181.10.6.1.85.102.1.5	Unsigned32	read-only	Number of frames with size between 256 and 511 bytes received
U32 histogramIn512To1023Octets	1.3.6.1.4.1.3181.10.6.1.85.102.1.6	Unsigned32	read-only	Number of frames with size between 512 and 1023 bytes received
U32 histogramIn1024ToMaxOctets	1.3.6.1.4.1.3181.10.6.1.85.102.1.7	Unsigned32	read-only	Number of frames with size above 1023 bytes received
utilizationTable	1.3.6.1.4.1.3181.10.6.1.85.103		not-accessible	Calculates averaged data utilization values for each port.
utilizationEntry	1.3.6.1.4.1.3181.10.6.1.85.103.1		not-accessible
INT utilizationPortIndex	1.3.6.1.4.1.3181.10.6.1.85.103.1.1	INTEGER	not-accessible	Automatically generated
I32 utilizationIngressNow	1.3.6.1.4.1.3181.10.6.1.85.103.1.2	Integer32	read-only	Percentage of received utilization in the last second.
I32 utilizationIngress30s	1.3.6.1.4.1.3181.10.6.1.85.103.1.3	Integer32	read-only	Percentage of received utilization averaged over last 30s.
I32 utilizationIngress5min	1.3.6.1.4.1.3181.10.6.1.85.103.1.4	Integer32	read-only	Percentage of received utilization averaged over last 5 minutes.
I32 utilizationEgressNow	1.3.6.1.4.1.3181.10.6.1.85.103.1.5	Integer32	read-only	Percentage of outgoing utilization in the last second.
I32 utilizationEgress30s	1.3.6.1.4.1.3181.10.6.1.85.103.1.6	Integer32	read-only	Percentage of outgoing utilization averaged over last 30s.
I32 utilizationEgress5min	1.3.6.1.4.1.3181.10.6.1.85.103.1.7	Integer32	read-only	Percentage of outgoing utilization averaged over last 5 minutes.

RFC description

Provides RMON statistics and monitoring for Microsens Generation 6 Ethernet switches.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (per-port RMON-style traffic statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-RMON-MIB

What Is G6-RMON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description