All MIBs › Fore-PNNI-MIB
Organization: FORE
Last Updated: 1999-11-05
Category: ATM, Vendor: Fore Systems (ATM)
Description: Fore Systems PNNI (Private Network-to-Network Interface) MIB providing routing and topology management for ForeThought PNNI ATM network control.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Fore-PNNI-MIB?
Fore-PNNI-MIB implements FORE Systems' vendor extensions to the standard PNNI (Private Network-to-Network Interface) MIB, used for ATM routing and topology management on ForeThought-based ATM switches. It exposes PNNI traffic/QoS profile configuration objects covering service category, minimum forward/reverse cell rates, CLP handling, cell loss ratio, and optimum cell transfer delay, used when establishing PNNI-signaled connections across an ATM network. Administrators use these objects mainly to verify traffic contract and QoS profile configuration, though the underlying PNNI and ATM routing groups also surface topology and reachability status relevant to overall network health. It depends heavily on the ATM Forum's standard PNNI MIB and ATM routing conventions, extending rather than replacing them. It is deployed in FORE/Marconi ATM switches participating in PNNI-routed carrier or enterprise ATM backbones, and network engineers can perform a Fore-PNNI-MIB download to load the module directly into their MIB browser for reference.
IPNetwork Monitor allows you to monitor SNMP objects defined in Fore-PNNI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Fore Systems/Marconi ForeThought ATM switch
Monitoring Examples
An admin reviewing pnniPcProfileTable/pnniPcProfileEntry can inspect pnniPcProfileServiceCategory, pnniPcProfileMinFwdCR, and pnniPcProfileMinRevCR to confirm a traffic profile matches the intended QoS class for a PNNI connection. Checking pnniPcProfileOptCTD and the CLR objects (pnniPcProfileFwdCLR/RevCLR) helps validate whether configured cell loss and delay targets are consistent with what the network can deliver, flagging misconfigured profiles that could cause call setup failures.
What Can Be Monitored
- PNNI traffic profile service category
- minimum forward/reverse cell rate
- cell loss ratio settings
- optimum cell transfer delay
- CLP handling mode
This MIB depends on
Related MIBs
Imported Objects
From Fore-Common-MIB
| NsapAddr | |
| NsapPrefix | |
| software | OBJECT-IDENTITY |
From Fore-Switch-MIB
| portNumber | OBJECT-TYPE |
From IF-MIB
| InterfaceIndex |
From PNNI-MIB
| AtmAddrPrefix | |
| PnniMetricsTag | |
| PnniNodeId | |
| PnniNodeIndex | |
| PnniPortId | |
| PnniPrefixLength | |
| ServiceCategory | |
| TnsPlan | |
| TnsType | |
| pnniDTLIndex | OBJECT-TYPE |
| pnniMapAddrAdvertisedPortId | OBJECT-TYPE |
| pnniMapAddrAdvertisingNodeId | OBJECT-TYPE |
| pnniMapAddrIndex | OBJECT-TYPE |
| pnniMapIndex | OBJECT-TYPE |
| pnniMapOriginatingNodeId | OBJECT-TYPE |
| pnniMapOriginatingPortId | OBJECT-TYPE |
| pnniNodeIndex | OBJECT-TYPE |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| forePnniGroup | 1.3.6.1.4.1.326.2.2.2.4 | This module implements the FORE Systems extentions to the PNNI MIB. | ||
| pnniGroup | 1.3.6.1.4.1.326.2.2.2.4.1 | |||
| pnniPcProfileTable | 1.3.6.1.4.1.326.2.2.2.4.1.1 | not-accessible | profiles for each service catagory | |
| pnniPcProfileEntry | 1.3.6.1.4.1.326.2.2.2.4.1.1.1 | not-accessible | ||
| PNN pnniPcProfileIndex | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.1 | PnniPcProfileIndex | not-accessible | |
| INT pnniPcProfileType | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.2 | INTEGER | read-only | Indicates whether the profile is dynamic generated or user configured for cache profile there might be avoid node list or prefered node list |
| SER pnniPcProfileServiceCategory | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.3 | ServiceCategory | read-create | Service category |
| U32 pnniPcProfileMinFwdCR | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.4 | Unsigned32 | read-create | Minimum forward cell rate |
| U32 pnniPcProfileMinRevCR | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.5 | Unsigned32 | read-create | Minimum reverse cell rate |
| INT pnniPcProfileFwdClpType | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.6 | INTEGER | read-create | for CBR/VBR only |
| INT pnniPcProfileRevClpType | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.7 | INTEGER | read-create | for CBR/VBR only |
| U32 pnniPcProfileFwdCLR | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.8 | Unsigned32 | read-create | for CBR/VBR only |
| U32 pnniPcProfileRevCLR | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.9 | Unsigned32 | read-create | for CBR/VBR only |
| T/F pnniPcProfileOptCTD | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.10 | TruthValue | read-create | optimization criteria flag: Multiple trees will be computed for VBR if several are set. For ABR profile, only one of these can be set. If CTD set, CDV is treated as path constraint. Only one can be set of AW and CAW |
| T/F pnniPcProfileOptCDV | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.11 | TruthValue | read-create | see above |
| INT pnniPcProfileOptAdminWeight | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.12 | INTEGER | read-create | see above |
| T/F pnniPcProfileRstrVPOnly | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.13 | TruthValue | read-create | for all categories |
| T/F pnniPcProfileRstrLoadBalance | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.14 | TruthValue | read-create | for ABR/UBR. True means do not load-balance trees |
| U32 pnniPcProfileNumberOfAvoidLinks | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.15 | Unsigned32 | read-only | number of avoided links in this profile for cache profile only |
| U32 pnniPcProfileNumberOfPreferLinks | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.16 | Unsigned32 | read-only | number of preferred links in this profile for cache profile only |
| U32 pnniPcProfileNumberOfHits | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.17 | Unsigned32 | read-only | number of hits on this profile since it is configured |
| TIM pnniPcProfileTimeStamp | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.18 | TimeStamp | read-only | Time elapsed since last hit in seconds |
| INT pnniPcProfileState | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.19 | INTEGER | read-only | State of the profile, whether it is computed, in computing or topolgy changed |
| ROW pnniPcProfileRowStatus | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.20 | RowStatus | read-create | for create, modify and delete a profile entry |
| T/F pnniPcProfileCongestionBased | 1.3.6.1.4.1.326.2.2.2.4.1.1.1.21 | TruthValue | read-create | Indicates if the profile describes a congestion based route |
| pnniExportPolicyTable | 1.3.6.1.4.1.326.2.2.2.4.1.2 | not-accessible | export policy table | |
| pnniExportPolicyEntry | 1.3.6.1.4.1.326.2.2.2.4.1.2.1 | not-accessible | ||
| ATM pnniExportPolicyAddress | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.1 | AtmAddrPrefix | not-accessible | |
| PNN pnniExportPolicyPrefixLength | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.2 | PnniPrefixLength | not-accessible | |
| INT pnniExportPolicyType | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.3 | INTEGER | read-create | |
| INT pnniExportPolicyAction | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.4 | INTEGER | read-create | |
| INT pnniExportPolicyState | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.5 | INTEGER | read-only | |
| TNS pnniExportPolicyTnsType | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.6 | TnsType | read-create | |
| TNS pnniExportPolicyTnsPlan | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.7 | TnsPlan | read-create | |
| STR pnniExportPolicyTnsId | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.8 | DisplayString | read-create | |
| PNN pnniExportPolicyMetricsTag | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.9 | PnniMetricsTag | read-create | |
| ROW pnniExportPolicyRowStatus | 1.3.6.1.4.1.326.2.2.2.4.1.2.1.10 | RowStatus | read-create | |
| pnniNodeExtnTable | 1.3.6.1.4.1.326.2.2.2.4.1.3 | not-accessible | Extension to the PNNI Node Table in the PNNI MIB | |
| pnniNodeExtnEntry | 1.3.6.1.4.1.326.2.2.2.4.1.3.1 | not-accessible | ||
| I32 pnniNodeExtnDomainID | 1.3.6.1.4.1.326.2.2.2.4.1.3.1.1 | Integer32 | read-write | The ID of the ATM Routing Domain to which this PNNI Node belongs |
| I32 pnniNodeExtnForeLevel | 1.3.6.1.4.1.326.2.2.2.4.1.3.1.2 | Integer32 | read-write | The level of the area to which this PNNI node belongs in the FORE hierarchy |
| I32 pnniNodeExtnForeArea | 1.3.6.1.4.1.326.2.2.2.4.1.3.1.3 | Integer32 | read-write | the ID of the area in the FORE hierarchy to which this PNNI node belongs |
| T/F pnniNodeExtnShutdown | 1.3.6.1.4.1.326.2.2.2.4.1.3.1.4 | TruthValue | read-only | Specifies whether the node is shutdown or not due to inconsistencies in TDB or due to TDB incremental MALLOC failures.A value of false indicates that the PNNI logical node is not shutdown and participates in all PNNI Protocol operation(s),and a value of true indicates that PNNI logical node is Shutdown and the switch has to be rebooted to bring this PNNI logical node up again. |
| T/F pnniNodeExtnLoadBalancing | 1.3.6.1.4.1.326.2.2.2.4.1.3.1.5 | TruthValue | read-write | Specifies whether the profiles creating during on demand path computation are load balanced. |
| I32 pnniNodeExtnAdvertisedPglPriority | 1.3.6.1.4.1.326.2.2.2.4.1.3.1.6 | Integer32 | read-only | This is the leadership priority value which is actually advertised by the node. This can differ from the configured value for reasons of PGL/LGN-incapability or stability. |
| I32 pnniNodeExtnPcCongestionRange | 1.3.6.1.4.1.326.2.2.2.4.1.3.1.7 | Integer32 | read-write | The range in congestion that path computation will include in a profile tree |
| pnniMapRaigTable | 1.3.6.1.4.1.326.2.2.2.4.1.4 | not-accessible | PNNI Map Raig Table | |
| pnniMapRaigEntry | 1.3.6.1.4.1.326.2.2.2.4.1.4.1 | not-accessible | ||
| I32 pnniMapRaigIndex | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.1 | Integer32 | not-accessible | An index into set of RAIG entries in the MAP entry. For Horizontal Links and Up Links only outgoing RAIG entries are present. For Nodal State IGs RAIG entries are present for both directions. |
| INT pnniMapRaigDirection | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.2 | INTEGER | read-only | The direction of the link for which this particular set of parameters |
| I32 pnniMapRaigFlags | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.3 | Integer32 | read-only | Bit mask identifying which service category this RAIG describes. The GCAC CLP Attribute bit is also present. |
| U32 pnniMapRaigAdminWt | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.4 | Unsigned32 | read-only | Adminstrative Weight associated with this map entry. |
| U32 pnniMapRaigMaximumCellRate | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.5 | Unsigned32 | read-only | Maximum Cell Rate (Units : cells/second ). |
| U32 pnniMapRaigAvailableCellRate | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.6 | Unsigned32 | read-only | Available Cell Rate (Units : cells/second ). |
| U32 pnniMapRaigCellTransferDelay | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.7 | Unsigned32 | read-only | Cell Transfer Delay (Units : micro seconds ). |
| U32 pnniMapRaigCellDelayVariation | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.8 | Unsigned32 | read-only | Cell Delay Variation (Units : micro seconds ). |
| I32 pnniMapRaigCellLossRatio | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.9 | Integer32 | read-only | Cell Loss Ratio for CLP=0 encoded as the negative logarithm of the value. |
| I32 pnniMapRaigCellLossRatio1 | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.10 | Integer32 | read-only | Cell Loss Ratio for CLP=0+1 encoded as the negative logarithm of the value. |
| I32 pnniMapRaigCellRateMargin | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.11 | Integer32 | read-only | Cell Rate Margin in units cells/second. If the optional GCAC related information is not present then this value would be set to zero. |
| I32 pnniMapRaigVarianceFactor | 1.3.6.1.4.1.326.2.2.2.4.1.4.1.12 | Integer32 | read-only | Variance Factor in units 2^-8. If the optional GCAC related information is not present then this value would be set to zero. |
| pnniMapAddrRaigTable | 1.3.6.1.4.1.326.2.2.2.4.1.5 | not-accessible | PNNI MapAddr Raig Table | |
| pnniMapAddrRaigEntry | 1.3.6.1.4.1.326.2.2.2.4.1.5.1 | not-accessible | ||
| I32 pnniMapAddrRaigIndex | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.1 | Integer32 | not-accessible | An index into set of RAIG entries in the MapAddr entry. For Horizontal Links and Up Links only outgoing RAIG entries are present. For Nodal State IGs RAIG entries are present for both directions. |
| INT pnniMapAddrRaigDirection | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.2 | INTEGER | read-only | The direction of the link for which this particular set of parameters |
| I32 pnniMapAddrRaigFlags | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.3 | Integer32 | read-only | Bit mask identifying which service category this RAIG describes. The GCAC CLP Attribute bit is also present. |
| U32 pnniMapAddrRaigAdminWt | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.4 | Unsigned32 | read-only | Adminstrative Weight associated with this MapAddr entry. |
| U32 pnniMapAddrRaigMaximumCellRate | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.5 | Unsigned32 | read-only | Maximum Cell Rate (Units : cells/second ). |
| U32 pnniMapAddrRaigAvailableCellRate | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.6 | Unsigned32 | read-only | Available Cell Rate (Units : cells/second ). |
| U32 pnniMapAddrRaigCellTransferDelay | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.7 | Unsigned32 | read-only | Cell Transfer Delay (Units : micro seconds ). |
| U32 pnniMapAddrRaigCellDelayVariation | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.8 | Unsigned32 | read-only | Cell Delay Variation (Units : micro seconds ). |
| I32 pnniMapAddrRaigCellLossRatio | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.9 | Integer32 | read-only | Cell Loss Ratio for CLP=0 encoded as the negative logarithm of the value. |
| I32 pnniMapAddrRaigCellLossRatio1 | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.10 | Integer32 | read-only | Cell Loss Ratio for CLP=0+1 encoded as the negative logarithm of the value. |
| I32 pnniMapAddrRaigCellRateMargin | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.11 | Integer32 | read-only | Cell Rate Margin in units cells/second. If the optional GCAC related information is not present then this value would be set to zero. |
| I32 pnniMapAddrRaigVarianceFactor | 1.3.6.1.4.1.326.2.2.2.4.1.5.1.12 | Integer32 | read-only | Variance Factor in units 2^-8. If the optional GCAC related information is not present then this value would be set to zero. |
| pnniPcProfileMapTable | 1.3.6.1.4.1.326.2.2.2.4.1.6 | not-accessible | PNNI Precomputed Paths Map Table. | |
| pnniPcProfileMapEntry | 1.3.6.1.4.1.326.2.2.2.4.1.6.1 | not-accessible | ||
| I32 pnniPcProfileMapOptIndex | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.1 | Integer32 | not-accessible | An index into set of RAIG entries in the MapAddr entry. For Horizontal Links and Up Links only outgoing RAIG entries are present. For Nodal State IGs RAIG entries are present for both directions. |
| PNN pnniPcProfileMapNodeId | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.2 | PnniNodeId | not-accessible | The nodes on the precomputed paths tree. |
| PNN pnniPcProfileMapLocalPort | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.3 | PnniPortId | read-only | The local port the this node connects to the remote node |
| PNN pnniPcProfileMapParentNode | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.4 | PnniNodeId | read-only | The remote or parent node |
| U32 pnniPcProfileMapAdminWt | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.5 | Unsigned32 | read-only | Adminstrative Weight associated with this MapAddr entry. |
| U32 pnniPcProfileMapMaximumCellRate | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.6 | Unsigned32 | read-only | Maximum Cell Rate (Units : cells/second ). |
| U32 pnniPcProfileMapAvailableCellRate | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.7 | Unsigned32 | read-only | Available Cell Rate (Units : cells/second ). |
| U32 pnniPcProfileMapCellTransferDelay | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.8 | Unsigned32 | read-only | Cell Transfer Delay (Units : micro seconds ). |
| U32 pnniPcProfileMapCellDelayVariation | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.9 | Unsigned32 | read-only | Cell Delay Variation (Units : micro seconds ). |
| I32 pnniPcProfileMapCellLossRatio | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.10 | Integer32 | read-only | Cell Loss Ratio for CLP=0 encoded as the negative logarithm of the value. |
| I32 pnniPcProfileMapCellLossRatio1 | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.11 | Integer32 | read-only | Cell Loss Ratio for CLP=0+1 encoded as the negative logarithm of the value. |
| I32 pnniPcProfileMapCellRateMargin | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.12 | Integer32 | read-only | Cell Rate Margin in units cells/second. If the optional GCAC related information is not present then this value would be set to zero. |
| I32 pnniPcProfileMapVarianceFactor | 1.3.6.1.4.1.326.2.2.2.4.1.6.1.13 | Integer32 | read-only | Variance Factor in units 2^-8. If the optional GCAC related information is not present then this value would be set to zero. |
| pnniSpanningTreeMapTable | 1.3.6.1.4.1.326.2.2.2.4.1.7 | not-accessible | PNNI Reachability Tree(SpanningTree) Map Table. | |
| pnniSpanningTreeMapEntry | 1.3.6.1.4.1.326.2.2.2.4.1.7.1 | not-accessible | ||
| PNN pnniSpanningTreeMapNodeId | 1.3.6.1.4.1.326.2.2.2.4.1.7.1.1 | PnniNodeId | not-accessible | The nodes on the Reachability tree. |
| INT pnniSpanningTreeMapStatus | 1.3.6.1.4.1.326.2.2.2.4.1.7.1.2 | INTEGER | read-only | The status of the spanning tree. If links are added or removed then the spanning tree may not be up to date for a while until the tree is updated. If there are link added and deleted, the status will be linkdeleted |
| PNN pnniSpanningTreeMapParentNode | 1.3.6.1.4.1.326.2.2.2.4.1.7.1.3 | PnniNodeId | read-only | The parent node or the next hop node on the spanning tree |
| PNN pnniSpanningTreeMapPort | 1.3.6.1.4.1.326.2.2.2.4.1.7.1.4 | PnniPortId | read-only | The local port the this node connects to the remote node |
| INT pnniSpanningTreeMapLinkType | 1.3.6.1.4.1.326.2.2.2.4.1.7.1.5 | INTEGER | read-only | The type of the link that connects this noe to the remote node |
| pnniNodeScStatsTable | 1.3.6.1.4.1.326.2.2.2.4.1.8 | not-accessible | Scheduler statistics table. | |
| pnniNodeScStatsEntry | 1.3.6.1.4.1.326.2.2.2.4.1.8.1 | not-accessible | ||
| U32 pnniNodeScStatsNrOfEvents | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.2 | Unsigned32 | read-only | The number of scheduler events |
| U32 pnniNodeScStatsNrOfPurges | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.3 | Unsigned32 | read-only | The number of scheduler queue purges |
| U32 pnniNodeScStatsNrOfTimeoutPurges | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.4 | Unsigned32 | read-only | The number of times scheduler queues were purged due to xxx timer expiry. |
| U32 pnniNodeScStatsNrOfPacketsDropped | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.5 | Unsigned32 | read-only | The number of packets dropped in the scheduler |
| U32 pnniNodeScStatsNrOfHiPriPktsDropped | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.6 | Unsigned32 | read-only | The number of high priority packets dropped in the scheduler |
| U32 pnniNodeScStatsNrOfLowPriPktsDropped | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.7 | Unsigned32 | read-only | The number of low priority packets dropped in the scheduler |
| U32 pnniNodeScStatsNrOfNodalInfoEvents | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.8 | Unsigned32 | read-only | The number of significant changes occurred to NodalInformation Information Groups |
| U32 pnniNodeScStatsNrOfHorizLinkEvents | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.9 | Unsigned32 | read-only | The number of significant changes occurred to Horizontal Link Information Group. |
| U32 pnniNodeScStatsNrOfUpLinkEvents | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.10 | Unsigned32 | read-only | The number of significant changes occurred to Uplink Information Group. |
| U32 pnniNodeScStatsNrOfNodalStateEvents | 1.3.6.1.4.1.326.2.2.2.4.1.8.1.11 | Unsigned32 | read-only | The number of significant changes occurred to Nodal State Information Group. |
| pnniCrankbackGroup | 1.3.6.1.4.1.326.2.2.2.4.1.9 | |||
| I32 pnniMaxCrankbackTries | 1.3.6.1.4.1.326.2.2.2.4.1.9.1 | Integer32 | read-write | The maximum number of tries for a given call in the case of receiving crankbacks when attempting to progress the call. This value includes the first attempt at progressing the call also. |
| pnniPcProfileAvoidLinkTable | 1.3.6.1.4.1.326.2.2.2.4.1.10 | not-accessible | avoid link table for the cache profile | |
| pnniPcProfileAvoidLinkEntry | 1.3.6.1.4.1.326.2.2.2.4.1.10.1 | not-accessible | ||
| I32 pnniPcProfileAvoidLinkIndex | 1.3.6.1.4.1.326.2.2.2.4.1.10.1.1 | Integer32 | not-accessible | The index to the list of to be avoided links in this profile |
| PNN pnniPcProfileAvoidLinkNodeId | 1.3.6.1.4.1.326.2.2.2.4.1.10.1.2 | PnniNodeId | read-only | The nodeid of the node to be avoided |
| PNN pnniPcProfileAvoidLinkPortId | 1.3.6.1.4.1.326.2.2.2.4.1.10.1.3 | PnniPortId | read-only | Portid of the link. If it is zero, the node is to be avoided which means all links of this node should be avoided |
| INT pnniPcProfileAvoidLinkType | 1.3.6.1.4.1.326.2.2.2.4.1.10.1.4 | INTEGER | read-only | The link type, normal link will in the form of (node, portid, rmtnode) for reverse link it is in form of (node, rmtportid, rmtnode) and it is the reverse reprentation of the uplink (rmtnode, rmtportid, node) |
| PNN pnniPcProfileAvoidLinkRemoteNodeId | 1.3.6.1.4.1.326.2.2.2.4.1.10.1.5 | PnniNodeId | read-only | The remote node id of the link. If portid is zero, then the node is to be avoided not just a link. Remote node id is not available in this case |
| pnniPcProfilePreferLinkTable | 1.3.6.1.4.1.326.2.2.2.4.1.11 | not-accessible | Prefered link table for the cache profile | |
| pnniPcProfilePreferLinkEntry | 1.3.6.1.4.1.326.2.2.2.4.1.11.1 | not-accessible | ||
| I32 pnniPcProfilePreferLinkIndex | 1.3.6.1.4.1.326.2.2.2.4.1.11.1.1 | Integer32 | not-accessible | The index to the list of prefered links in this profile |
| PNN pnniPcProfilePreferLinkNodeId | 1.3.6.1.4.1.326.2.2.2.4.1.11.1.2 | PnniNodeId | read-only | The nodeid of the node is prefered |
| PNN pnniPcProfilePreferLinkPortId | 1.3.6.1.4.1.326.2.2.2.4.1.11.1.3 | PnniPortId | read-only | Portid of the link. |
| INT pnniPcProfilePreferLinkType | 1.3.6.1.4.1.326.2.2.2.4.1.11.1.4 | INTEGER | read-only | The link type, normal link will in the form of (node, portid, rmtnode) for reverse link it is in form of (node, rmtportid, rmtnode) and it is the reverse reprentation of the uplink (rmtnode, rmtportid, node) |
| PNN pnniPcProfilePreferLinkRemoteNodeId | 1.3.6.1.4.1.326.2.2.2.4.1.11.1.5 | PnniNodeId | read-only | The remote node id of the link. |
| pnniParametersGroup | 1.3.6.1.4.1.326.2.2.2.4.1.12 | |||
| INT pnniMaxDtlSize | 1.3.6.1.4.1.326.2.2.2.4.1.12.1 | INTEGER | read-write | The maximum number of hops per DTL supported by this switch. The switch will not process any incoming DTL that has more than this number of hops at any level of the PNNI hierarchy. It will also not generate any calls with more than this number of hops in any DTL at any level of PNNI hierarchy. |
| I32 pnniLoadBalancedUbrEnable | 1.3.6.1.4.1.326.2.2.2.4.1.12.2 | Integer32 | read-write | This value specifies whether LBUBR routing of SPVCs is enabled |
| forePnniDTLTable | 1.3.6.1.4.1.326.2.2.2.4.1.13 | not-accessible | This table holds the validate object for the DTL entries defined in the standard PNNI DTL MIB table. | |
| forePnniDTLEntry | 1.3.6.1.4.1.326.2.2.2.4.1.13.1 | not-accessible | Validate command for the DTL indexed by the node and DTL index. | |
| STR forePnniDTLName | 1.3.6.1.4.1.326.2.2.2.4.1.13.1.1 | DisplayString | read-write | The Name of this Directed Designated Transit List |
| STR forePnniDTLValidity | 1.3.6.1.4.1.326.2.2.2.4.1.13.1.2 | DisplayString | read-only | The validity of the DTL referenced by the pnniNodeIndex and pnniDtlIndex. If validation fails, the text describes the cause for failure and the hop at which the dtl failed. |
| pnniDtlComputationTable | 1.3.6.1.4.1.326.2.2.2.4.1.14 | not-accessible | This table provides an interface for the calculation and creation of a DTL. | |
| pnniDtlComputationEntry | 1.3.6.1.4.1.326.2.2.2.4.1.14.1 | not-accessible | A structure containing the parameters for creation of a directed DTL. | |
| PNN pnniDtlComputationNodeIndex | 1.3.6.1.4.1.326.2.2.2.4.1.14.1.1 | PnniNodeIndex | read-write | The node index of the DTL to be created. |
| I32 pnniDtlComputationDtlIndex | 1.3.6.1.4.1.326.2.2.2.4.1.14.1.2 | Integer32 | read-write | The DTL index of the DTL to be created. |
| NSA pnniDtlComputationDestNsapAddress | 1.3.6.1.4.1.326.2.2.2.4.1.14.1.3 | NsapAddr | read-write | The destination NSAP address of the DTL to be created. |
| I32 pnniDtlComputationCompute | 1.3.6.1.4.1.326.2.2.2.4.1.14.1.4 | Integer32 | read-write | When this object is written to, an attempt will be made to compute and create a new DTL with the specified parameters. |
| pnniDtlListTable | 1.3.6.1.4.1.326.2.2.2.4.1.15 | not-accessible | This table contains a list of Designated Transit Lists (DTLs) and their associated weights. | |
| pnniDtlListEntry | 1.3.6.1.4.1.326.2.2.2.4.1.15.1 | not-accessible | An entry in the PNNI DTL list table. A DTL list is formed by concatenating rows of the table for which the pnniDtlListIndex is the same. | |
| INT pnniDtlListTag | 1.3.6.1.4.1.326.2.2.2.4.1.15.1.1 | INTEGER | not-accessible | The value of this object specifies the tag associated with a PNNI DTL list in the table. A DTL list is a list of source route entries. |
| INT pnniDtlListNodeIndex | 1.3.6.1.4.1.326.2.2.2.4.1.15.1.2 | INTEGER | not-accessible | A unique pre-configured DTL on a switch is identified by a nodeIndex, dtlIndex pair. This object corresponds to the nodeIndex value of the DTL being referred to. |
| INT pnniDtlListDtlIndex | 1.3.6.1.4.1.326.2.2.2.4.1.15.1.3 | INTEGER | not-accessible | A unique pre-configured DTL on a switch is identified by a nodeIndex, dtlIndex pair. This object corresponds to the dtlIndex value of the DTL being referred to. |
| INT pnniDtlListWeight | 1.3.6.1.4.1.326.2.2.2.4.1.15.1.4 | INTEGER | read-create | The weight specifies the priority of this DTL entry index among all the DTL indices that are specified in the list. |
| ROW pnniDtlListStatus | 1.3.6.1.4.1.326.2.2.2.4.1.15.1.5 | RowStatus | read-create | The status of this DTL entry in the list. |
| pnniMapNodeExtTable | 1.3.6.1.4.1.326.2.2.2.4.1.16 | not-accessible | A table containing extended map node information for PNNI nodes running on FORE switches | |
| pnniMapNodeExtEntry | 1.3.6.1.4.1.326.2.2.2.4.1.16.1 | not-accessible | An entry in the table, containing the extended map node information for a particular node. | |
| PNN pnniMapNodeExtRemoteNodeId | 1.3.6.1.4.1.326.2.2.2.4.1.16.1.1 | PnniNodeId | not-accessible | The PNNI node ID of the node being described. |
| U32 pnniMapNodeExtSoftwareVersion | 1.3.6.1.4.1.326.2.2.2.4.1.16.1.2 | Unsigned32 | read-only | The version number of the software on the host switch |
| U32 pnniMapNodeExtHardwareVersion | 1.3.6.1.4.1.326.2.2.2.4.1.16.1.3 | Unsigned32 | read-only | The version number of the hardware on the host switch |
| U32 pnniMapNodeExtHardwareId | 1.3.6.1.4.1.326.2.2.2.4.1.16.1.4 | Unsigned32 | read-only | A value uniquely identifying the host switch |
| STR pnniMapNodeExtSwitchName | 1.3.6.1.4.1.326.2.2.2.4.1.16.1.5 | DisplayString | read-only | The system name of the host switch |
| I32 pnniMapNodeExtRemoteNodeIndex | 1.3.6.1.4.1.326.2.2.2.4.1.16.1.6 | Integer32 | read-only | The node index of the node on the host switch |
| U32 pnniMapNodeExtForeNodalFlags | 1.3.6.1.4.1.326.2.2.2.4.1.16.1.7 | Unsigned32 | read-only | A bit vector indicating the status of several flags on the node |
| pnniMapNodeIpAddrTable | 1.3.6.1.4.1.326.2.2.2.4.1.17 | not-accessible | A table containing the configured IP address of the map nodes. The key is formed by combining the local node index, the remote node id, and the IP address. | |
| pnniMapNodeIpAddrEntry | 1.3.6.1.4.1.326.2.2.2.4.1.17.1 | not-accessible | An entry in the switch IP address table. | |
| IP pnniMapNodeIpAddr | 1.3.6.1.4.1.326.2.2.2.4.1.17.1.1 | IpAddress | read-only | The ip address of an interface |
| NUM pnniMapNodeIpAddrIfName | 1.3.6.1.4.1.326.2.2.2.4.1.17.1.2 | InterfaceLabel | read-only | The name of the IP address interface |
| pnniConnTreeMapTable | 1.3.6.1.4.1.326.2.2.2.4.1.18 | not-accessible | PNNI Connectivity Tree(SpanningTree) Map Table. | |
| pnniConnTreeMapEntry | 1.3.6.1.4.1.326.2.2.2.4.1.18.1 | not-accessible | ||
| PNN pnniConnTreeMapNodeId | 1.3.6.1.4.1.326.2.2.2.4.1.18.1.1 | PnniNodeId | not-accessible | The nodes on the Connectivity tree. |
| INT pnniConnTreeMapStatus | 1.3.6.1.4.1.326.2.2.2.4.1.18.1.2 | INTEGER | read-only | The status of the connectivity tree. If links are added or removed then the tree may not be up to date for a while until the tree is updated. If there are link added and deleted, the status will be linkdeleted |
| PNN pnniConnTreeMapParentNode | 1.3.6.1.4.1.326.2.2.2.4.1.18.1.3 | PnniNodeId | read-only | The parent node or the next hop node on the tree |
| PNN pnniConnTreeMapPort | 1.3.6.1.4.1.326.2.2.2.4.1.18.1.4 | PnniPortId | read-only | The local port the this node connects to the remote node |
| INT pnniConnTreeMapLinkType | 1.3.6.1.4.1.326.2.2.2.4.1.18.1.5 | INTEGER | read-only | The type of the link that connects this noe to the remote node |
| atmRoutingGroup | 1.3.6.1.4.1.326.2.2.2.4.2 | |||
| rtDomainTable | 1.3.6.1.4.1.326.2.2.2.4.2.1 | not-accessible | A table of routing domains withing the ATM routing module | |
| rtDomainEntry | 1.3.6.1.4.1.326.2.2.2.4.2.1.1 | not-accessible | A table entry containing administrative routing domain information | |
| I32 rtDomainID | 1.3.6.1.4.1.326.2.2.2.4.2.1.1.1 | Integer32 | read-create | The ID of this Routing Domain |
| INT rtDomainDefaultProto | 1.3.6.1.4.1.326.2.2.2.4.2.1.1.2 | INTEGER | read-create | The Default routing protocol used by this switch |
| NSA rtDomainPrefix | 1.3.6.1.4.1.326.2.2.2.4.2.1.1.3 | NsapPrefix | read-create | The Default Prefix associated with this Domain |
| STR rtDomainName | 1.3.6.1.4.1.326.2.2.2.4.2.1.1.4 | DisplayString | read-create | The Domain Name of this administrative Routing Domain |
| INT rtDomainDefSumState | 1.3.6.1.4.1.326.2.2.2.4.2.1.1.5 | INTEGER | read-create | The State of the Default Summarization Policy in this domain. If enabled, Default Summarization Policies are activated (peergroup ID of each node in this domain is used as a summarization policy for all other nodes in the domain). If disabled, the default summarization policies are deactivated |
| ROW rtDomainStatus | 1.3.6.1.4.1.326.2.2.2.4.2.1.1.6 | RowStatus | read-create | The entry status of this routing domain |
| NSA rtDomainDefaultPrefix | 1.3.6.1.4.1.326.2.2.2.4.2.1.1.7 | NsapPrefix | read-only | The factory-encoded default domain prefix for this switch |
| atmrPrefixTable | 1.3.6.1.4.1.326.2.2.2.4.2.2 | not-accessible | The atmrPrefixTable is a collection of all addresses reachable with in a domain. This includes all internal reachable addresses, external reachable addresses and locally registered addresses. | |
| atmrPrefixEntry | 1.3.6.1.4.1.326.2.2.2.4.2.2.1 | not-accessible | An entry in the table, containing information about a reachable prefix in this switching system. | |
| ATM atmrPrefixAddr | 1.3.6.1.4.1.326.2.2.2.4.2.2.1.1 | AtmAddrPrefix | not-accessible | The value of the prefix. In the case where multiple nodes advertised reachability to the same prefix, all the PTEs describes the nodes will be collected in this entry. |
| PNN atmrPrefixLength | 1.3.6.1.4.1.326.2.2.2.4.2.2.1.2 | PnniPrefixLength | not-accessible | Length of the prefix. |
| I32 atmrPrefixFlags | 1.3.6.1.4.1.326.2.2.2.4.2.2.1.3 | Integer32 | read-only | Flags indicate the status of the prefix node, this is a bitmask. The description of bits is as follows. Bit Description 1 when set indicates that this prefix node in on the change list 2 when set indicates that the prefix node has been deleted. |
| I32 atmrPrefixOwnerLevel | 1.3.6.1.4.1.326.2.2.2.4.2.2.1.4 | Integer32 | read-only | The level of the node that owns this prefix. The meaning of owning a prefix can be explained as the preferred node among the nodes advertising this prefix. |
| INT atmrPrefixOwnerProtocol | 1.3.6.1.4.1.326.2.2.2.4.2.2.1.5 | INTEGER | read-only | The protocol throught which this prefix was learnt from the owner. |
| I32 atmrPrefixOwnerPathFlags | 1.3.6.1.4.1.326.2.2.2.4.2.2.1.6 | Integer32 | read-only | These flags describe the status of the PTE that owns it. Bit Description 1 when set indicates that this PTE is locally originated and cannot be further summarized. |
| U32 atmrPrefixTimeStamp | 1.3.6.1.4.1.326.2.2.2.4.2.2.1.7 | Unsigned32 | read-only | Time this prefix node added/changed. |
| atmrPteTable | 1.3.6.1.4.1.326.2.2.2.4.2.3 | not-accessible | The atmrPteTable collects all the PTEs that are present in the Prefix Table. There is single row for every address known for each source. | |
| atmrPteEntry | 1.3.6.1.4.1.326.2.2.2.4.2.3.1 | not-accessible | An entry in the table, containing information about a reachable address, source and a handle to the source | |
| I32 atmrPteIndex | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.1 | Integer32 | not-accessible | Index to list of ptes belong to this prefix node |
| I32 atmrPteProtocolId | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.2 | Integer32 | read-only | Protocol's reference/identifier that the exact source of this information. It is tdbhndl for PNNI and nothing for ilmi or other localy registred addresses. |
| U32 atmrPteProtocolHandle | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.3 | Unsigned32 | read-only | Protocol's internal handle for this PTE, for pnni it is ptsehndl and for local routes it is the rt_node. |
| INT atmrPteProtocol | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.4 | INTEGER | read-only | The protocol through which this prefix was learnt. |
| I32 atmrPtePathFlags | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.5 | Integer32 | read-only | These flags describe the status of the PTE that owns it. Bit Description 1 when set indicates that this PTE is locally originated and cannot be further summarized. |
| I32 atmrPteLevel | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.6 | Integer32 | read-only | The area level of the registerer. |
| U32 atmrPteArea | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.7 | Unsigned32 | read-only | The id of are to which registerer belongs to. |
| I32 atmrPteScope | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.8 | Integer32 | read-only | The advertisement scope of prefix. |
| U32 atmrPteSourceArea | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.9 | Unsigned32 | read-only | The id of area from which prefix was learned. |
| I32 atmrPteType | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.10 | Integer32 | read-only | the reachability type of the prefix, its either internal ot external. |
| I32 atmrPteTnsLen | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.11 | Integer32 | read-only | The length of the TNS ID. |
| TNS atmrPteTnsType | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.12 | TnsType | read-only | Indicates the type of network identification of a specified transit network. |
| TNS atmrPteTnsPlan | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.13 | TnsPlan | read-only | Indicates the network identification plan of a specified transit network. |
| I32 atmrPteTnsId | 1.3.6.1.4.1.326.2.2.2.4.2.3.1.14 | Integer32 | read-only | The identifier of the transit network. |
| atmrInterDomainRouteTable | 1.3.6.1.4.1.326.2.2.2.4.2.4 | not-accessible | A table of static inter-domain routes within the ATMR module | |
| atmrInterDomainRouteEntry | 1.3.6.1.4.1.326.2.2.2.4.2.4.1 | not-accessible | A table entry containing an inter-domain static route | |
| I32 atmrIDRDomainID | 1.3.6.1.4.1.326.2.2.2.4.2.4.1.1 | Integer32 | read-create | The ID of this Routing Domain to which this static route belongs. This static route gets installed in the Prefix Tree of this domain and gets exported all nodes (PNNI and FT-PNNI) operating in this domain |
| ATM atmrIDRAddr | 1.3.6.1.4.1.326.2.2.2.4.2.4.1.2 | AtmAddrPrefix | read-create | This is the ATM Addr Prefix which is the reachable address prefix |
| PNN atmrIDRAddrLen | 1.3.6.1.4.1.326.2.2.2.4.2.4.1.3 | PnniPrefixLength | read-create | The prefix length to be applied to the ATM address prefix |
| I32 atmrIDRDestDomainID | 1.3.6.1.4.1.326.2.2.2.4.2.4.1.4 | Integer32 | read-create | The ID of the destination Domain in which this reachable prefix is actually reachable |
| ROW atmrIDRRowStatus | 1.3.6.1.4.1.326.2.2.2.4.2.4.1.5 | RowStatus | read-create | To create, delete, activate and de-activate a Inter-Domain route entries. |
| atmrDestNsapTable | 1.3.6.1.4.1.326.2.2.2.4.2.5 | not-accessible | A table of containing NSAP addresses for each AtmIf in a routing domain. This is used for SPVCCs and SPVPCs. | |
| atmrDestNsapEntry | 1.3.6.1.4.1.326.2.2.2.4.2.5.1 | not-accessible | An entry in the table, containing the NSAP address for the AtmIf in a domain. | |
| NSA atmrDestNsapAddr | 1.3.6.1.4.1.326.2.2.2.4.2.5.1.1 | NsapAddr | read-only | The NSAP address of this AtmIf in this domain. |
| pnniIfMapGroup | 1.3.6.1.4.1.326.2.2.2.4.3 | |||
| pnniPortVpiMapTable | 1.3.6.1.4.1.326.2.2.2.4.3.1 | not-accessible | Hardware Port table for converting Port VPI to ifix and portid in pnni | |
| pnniPortVpiMapEntry | 1.3.6.1.4.1.326.2.2.2.4.3.1.1 | not-accessible | ||
| I32 pnniPortVpiMapPort | 1.3.6.1.4.1.326.2.2.2.4.3.1.1.1 | Integer32 | not-accessible | Port index |
| I32 pnniPortVpiMapVpi | 1.3.6.1.4.1.326.2.2.2.4.3.1.1.2 | Integer32 | not-accessible | Vpi index |
| NUM pnniPortVpiMapIfIndex | 1.3.6.1.4.1.326.2.2.2.4.3.1.1.3 | InterfaceIndex | read-only | Pnni interface index |
| PNN pnniPortVpiMapPortId | 1.3.6.1.4.1.326.2.2.2.4.3.1.1.4 | PnniPortId | read-only | Port ID corresponding the interface |
| pnniPortIdMapTable | 1.3.6.1.4.1.326.2.2.2.4.3.2 | not-accessible | Port ID map table for converting Port ID to port/vpi and ifix | |
| pnniPortIdMapEntry | 1.3.6.1.4.1.326.2.2.2.4.3.2.1 | not-accessible | ||
| PNN pnniPortIdMapPortId | 1.3.6.1.4.1.326.2.2.2.4.3.2.1.1 | PnniPortId | not-accessible | PNNI Port ID corresponding the interface |
| I32 pnniPortIdMapPort | 1.3.6.1.4.1.326.2.2.2.4.3.2.1.2 | Integer32 | read-only | Port index on the switch |
| I32 pnniPortIdMapVpi | 1.3.6.1.4.1.326.2.2.2.4.3.2.1.3 | Integer32 | read-only | VPI index |
| NUM pnniPortIdMapIfIndex | 1.3.6.1.4.1.326.2.2.2.4.3.2.1.4 | InterfaceIndex | read-only | Pnni interface index |
RFC description
Fore Systems PNNI (Private Network-to-Network Interface) ATM routing extensions.
Start monitoring Fore Systems/Marconi ForeThought ATM switch (PNNI extensions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.