All MIBs › F3-SYNC-MIB › f3TimeClockEPRTCModeEnabled
f3TimeClockEPRTCModeEnabled
Module: F3-SYNC-MIB
OID (symbolic): F3-SYNC-MIB::f3TimeClockEPRTCModeEnabled
OID (numeric): 1.3.6.1.4.1.2544.1.12.12.1.3.1.26
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
This object describe whether it is EPRTC Mode Enabled. When enabled, the time clock combines the stable frequency input, such as a Cesium Clock, to extend the holdover capability to meet the e-PRTC holdover standards. Before configuring this setting, ensure that you activate the e-PRTC license. Note: This setting is applicable for Rb/HQ++ oscillators only.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.12.1.3.1.26 snmpwalk -v2c -c public <target> F3-SYNC-MIB::f3TimeClockEPRTCModeEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.12.1.3.1.26.1 snmpget -v2c -c public <target> F3-SYNC-MIB::f3TimeClockEPRTCModeEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.12.1.3.1.26.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.12 | f3SyncMIB | F3-SYNC-MIB |
| 1.3.6.1.4.1.2544.1.12.12.1 | f3SyncObjects | F3-SYNC-MIB |
| 1.3.6.1.4.1.2544.1.12.12.1.3 | f3TimeClockTable | F3-SYNC-MIB |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1 | f3TimeClockEntry | F3-SYNC-MIB |
| 1.3.6.1.4.1.2544.1.12.12.1.3.1.26 | f3TimeClockEPRTCModeEnabled | F3-SYNC-MIB |