All MIBs › F10-M-SERIES-CHASSIS-MIB › chStackUnitIndexNext
chStackUnitIndexNext
Module: F10-M-SERIES-CHASSIS-MIB
OID (symbolic): F10-M-SERIES-CHASSIS-MIB::chStackUnitIndexNext
OID (numeric): 1.3.6.1.4.1.6027.3.19.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This object contains the next appropriate value to be used for chStackUnitIndex when creating entries in the chStackUnitTable. The value 0 indicates that no unassigned entries are available. To obtain the chStackUnitIndexNext value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned number after each retrieval operation. After a manager retrieves a value the agent will determine when this index value will be made available for reuse.
Note that this object is not the unit number assigned by the management unit. The max number of stackable units allowed on this chassis is found from the object chNumMaxStackableUnits.
What is chStackUnitIndexNext?
This read-only Integer32 (0 or 1..6) is the next unassigned index a manager should use when creating a new row in chStackUnitTable; the source notes a value of 0 means no unassigned entries remain, and the manager must re-read this value before each new-unit provisioning attempt rather than assuming it's stable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.19.1.1.3 snmpwalk -v2c -c public <target> F10-M-SERIES-CHASSIS-MIB::chStackUnitIndexNext
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.19.1.1.3.1 snmpget -v2c -c public <target> F10-M-SERIES-CHASSIS-MIB::chStackUnitIndexNext.1
Start monitoring Dell Force10 M-Series modular blade chassis switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F10-M-SERIES-CHASSIS-MIB::chStackUnitIndexNext OID value, configure state conditions and alerts, and monitor any Dell Force10 M-Series modular blade chassis switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.19 | f10MSerChassisMib | F10-M-SERIES-CHASSIS-MIB |
| 1.3.6.1.4.1.6027.3.19.1 | f10MSerChassisObject | F10-M-SERIES-CHASSIS-MIB |
| 1.3.6.1.4.1.6027.3.19.1.1 | chObjects | F10-M-SERIES-CHASSIS-MIB |
| 1.3.6.1.4.1.6027.3.19.1.1.3 | chStackUnitIndexNext | F10-M-SERIES-CHASSIS-MIB |