F10-ISIS-MIB :: f10IsisSysOloadV6WaitForBgp

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › F10-ISIS-MIB › f10IsisSysOloadV6WaitForBgp

f10IsisSysOloadV6WaitForBgp

Module: F10-ISIS-MIB

OID (symbolic): F10-ISIS-MIB::f10IsisSysOloadV6WaitForBgp

OID (numeric): 1.3.6.1.4.1.6027.3.18.1.6

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: If this object is within the range of 5 to 86400, the overload bit is set for both levels when isis is enabled for next startup. The overload bit remains set until BGP has converged for both IPV4 and IPV6 neighbours or for seconds.f10IsisSysOloadV6WaitForBgp, whichever occurs first. A value of zero removes the config so that it will not be effected for the next startup.

What is f10IsisSysOloadV6WaitForBgp?

This read-write Unsigned32, in seconds (5 to 86400), configures the router to hold the IPv6 IS-IS overload bit until BGP has converged for both IPv4 and IPv6 neighbors, or until this timer expires, whichever happens first. Admins use it to avoid routing IPv6 transit traffic through a router whose BGP table isn't fully populated yet after a restart. For example, setting this to 600 gives the router up to 10 minutes to finish BGP convergence for both address families before it drops out of IPv6 overload state on its own.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.6
snmpwalk -v2c -c public <target> F10-ISIS-MIB::f10IsisSysOloadV6WaitForBgp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.6.1
snmpget -v2c -c public <target> F10-ISIS-MIB::f10IsisSysOloadV6WaitForBgp.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6027.3.18.1.6.1 i <value>

Start monitoring Dell Force10 switch/router (IS-IS routing protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F10-ISIS-MIB::f10IsisSysOloadV6WaitForBgp OID value, configure state conditions and alerts, and monitor any Dell Force10 switch/router (IS-IS routing protocol) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6027dellNetDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3dellNetMgmtDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3.18dellNetIsisMibDELL-NETWORKING-ISIS-MIB
1.3.6.1.4.1.6027.3.18.1dellNetIsisObjectsDELL-NETWORKING-ISIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6027.3.18.1.6f10IsisSysOloadV6WaitForBgpF10-ISIS-MIB