All MIBs › F10-ISIS-MIB › f10IsisSysOloadV6SetOloadOnStartupUntil
f10IsisSysOloadV6SetOloadOnStartupUntil
Module: F10-ISIS-MIB
OID (symbolic): F10-ISIS-MIB::f10IsisSysOloadV6SetOloadOnStartupUntil
OID (numeric): 1.3.6.1.4.1.6027.3.18.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: If this object is within the range of 5 to 86400, the overload bit is set for both levels for IPV6 when isis is enabled for next startup. The overload bit remains set for seconds.f10IsisSysOloadV6SetOloadOnStartupUntil. When f10IsisSysOloadV6SetOloadOnStartupUntil seconds have elapsed, the overload flag remains set if the implementation has run out of memory. Else, the system clears the overload bit. A value of zero removes the config so that it will not be effected in the next startup.
What is f10IsisSysOloadV6SetOloadOnStartupUntil?
This read-write Unsigned32, in seconds (5 to 86400), configures the router to automatically set the IPv6 IS-IS overload bit for a set period after startup, clearing it once the timer expires unless the box is still out of memory. Admins use it the same way as the IPv4 startup-overload timer but scoped to IPv6, keeping the router out of the IPv6 transit path while its IPv6 routing state stabilizes after a reload. For example, a value of zero removes this startup-overload configuration so it has no effect on the next reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.5 snmpwalk -v2c -c public <target> F10-ISIS-MIB::f10IsisSysOloadV6SetOloadOnStartupUntil
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.5.1 snmpget -v2c -c public <target> F10-ISIS-MIB::f10IsisSysOloadV6SetOloadOnStartupUntil.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6027.3.18.1.5.1 i <value>
Start monitoring Dell Force10 switch/router (IS-IS routing protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F10-ISIS-MIB::f10IsisSysOloadV6SetOloadOnStartupUntil OID value, configure state conditions and alerts, and monitor any Dell Force10 switch/router (IS-IS routing protocol) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3.18 | dellNetIsisMib | DELL-NETWORKING-ISIS-MIB |
| 1.3.6.1.4.1.6027.3.18.1 | dellNetIsisObjects | DELL-NETWORKING-ISIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.18.1.5 | f10IsisSysOloadV6SetOloadOnStartupUntil | F10-ISIS-MIB |