F10-ISIS-MIB :: f10IsisSysLevelV6OverloadState

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › F10-ISIS-MIB › f10IsisSysLevelV6OverloadState

f10IsisSysLevelV6OverloadState

Module: F10-ISIS-MIB

OID (symbolic): F10-ISIS-MIB::f10IsisSysLevelV6OverloadState

OID (numeric): 1.3.6.1.4.1.6027.3.18.1.7.1.3

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: The Overload state of the IPV6 database at this level. If the value is true, it indicates a database that is low on an essential resource, such as memory. The administrator may indirectly force the state to overloaded by setting the object f10IsisSysOloadV6SetOverload. If the state is overloaded, we originate LSPs with the Overload bit set.

What is f10IsisSysLevelV6OverloadState?

This read-only TruthValue reports whether this router's IPv6 IS-IS link-state database is currently in overload state at a given routing level, meaning true indicates it is low on an essential resource such as memory or was forced into overload via f10IsisSysOloadV6SetOverload. Admins check this to confirm the router's actual IPv6 overload condition, since an overloaded router originates its IPv6 LSPs with the overload bit set, causing other IS-IS routers to route IPv6 transit traffic around it. For example, an admin seeing IPv6 traffic bypass this router unexpectedly would check this object to confirm whether it's genuinely in an IPv6 memory-constrained overload state.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.7.1.3
snmpwalk -v2c -c public <target> F10-ISIS-MIB::f10IsisSysLevelV6OverloadState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.7.1.3.1
snmpget -v2c -c public <target> F10-ISIS-MIB::f10IsisSysLevelV6OverloadState.1

Start monitoring Dell Force10 switch/router (IS-IS routing protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F10-ISIS-MIB::f10IsisSysLevelV6OverloadState OID value, configure state conditions and alerts, and monitor any Dell Force10 switch/router (IS-IS routing protocol) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6027dellNetDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3dellNetMgmtDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.3.18dellNetIsisMibDELL-NETWORKING-ISIS-MIB
1.3.6.1.4.1.6027.3.18.1dellNetIsisObjectsDELL-NETWORKING-ISIS-MIB
1.3.6.1.4.1.6027.3.18.1.7dellNetIsisSysLevelTableDELL-NETWORKING-ISIS-MIB
1.3.6.1.4.1.6027.3.18.1.7.1dellNetIsisSysLevelEntryDELL-NETWORKING-ISIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6027.3.18.1.7.1.3f10IsisSysLevelV6OverloadStateF10-ISIS-MIB