All MIBs › ETH-SWITCH-MIB › scSegments
scSegments
Module: ETH-SWITCH-MIB
OID (symbolic): ETH-SWITCH-MIB::scSegments
OID (numeric): 1.3.6.1.4.1.208.39.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Object controlling the use of the System Center Backplane. Each bus is assigned a bit value in the object
What is scSegments?
Controls which backplane segments (buses A, B, and/or C) are enabled on the switch's System Center Backplane, using a set of values to select a single segment, a combination, or none at all. An administrator sets this to control how the backplane buses are joined, for example segmentAandB(3) to bridge segments A and B into one shared backplane.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.39.1.1 snmpwalk -v2c -c public <target> ETH-SWITCH-MIB::scSegments
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.208.39.1.1.1 snmpget -v2c -c public <target> ETH-SWITCH-MIB::scSegments.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.208.39.1.1.1 i <value>
Start monitoring Ethernet switch with port/VLAN management (vendor not confirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ETH-SWITCH-MIB::scSegments OID value, configure state conditions and alerts, and monitor any Ethernet switch with port/VLAN management (vendor not confirmed) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.208 | scanet | SCANET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.208.39 | ethSwitch | ETH-SWITCH-MIB |
| 1.3.6.1.4.1.208.39.1 | control | ETH-SWITCH-MIB |
| 1.3.6.1.4.1.208.39.1.1 | scSegments | ETH-SWITCH-MIB |