All MIBs › ETH-SWITCH-MIB › rxAllCounterOthers
rxAllCounterOthers
Module: ETH-SWITCH-MIB
OID (symbolic): ETH-SWITCH-MIB::rxAllCounterOthers
OID (numeric): 1.3.6.1.4.1.208.39.4.2.1.55
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: A collection of all counters other than for byte and packet counters. This object is needed to optimise SNMP traffic. The counters in this string are
rxStatIndex INTEGER rxShortErrors Counter rxRuntErrors Counter rxDataRateMMErrors Counter rxFilterMACUnexp2ndPortDrops Counter rxFilterIllegalMACDrops Counter rxFlowCtrlCollCounter Counter rxVeryLongErrors Counter rxLongErrors Counter rxPiaOutOfPoolsDrop Counter rxManchesterCodeViolationErrors Counter rxRxJabbers Counter rxNiaOverRunDrops Counter
-- Counters from RFC1643 rxAlignErrors Counter rxFCSErrors Counter
The values are represented in the OCTET STRING in the listed order, each value stored as a 32 bits big engine value.
What is rxAllCounterOthers?
Bundles the receive error/event counters not covered by rxAllCounterPackets -- short/runt/data-rate errors, the MAC filter drop counters, flow-control collisions, long/jabber/overrun errors, plus the standard RFC 1643 alignment and FCS error counters -- into one packed 60-byte OCTET STRING of 32-bit big-endian values, again to reduce the number of SNMP requests needed to poll a port's full statistics.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.39.4.2.1.55 snmpwalk -v2c -c public <target> ETH-SWITCH-MIB::rxAllCounterOthers
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.208.39.4.2.1.55.1 snmpget -v2c -c public <target> ETH-SWITCH-MIB::rxAllCounterOthers.1
Start monitoring Ethernet switch with port/VLAN management (vendor not confirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ETH-SWITCH-MIB::rxAllCounterOthers OID value, configure state conditions and alerts, and monitor any Ethernet switch with port/VLAN management (vendor not confirmed) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.208 | scanet | SCANET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.208.39 | ethSwitch | ETH-SWITCH-MIB |
| 1.3.6.1.4.1.208.39.4 | statistic | ETH-SWITCH-MIB |
| 1.3.6.1.4.1.208.39.4.2 | rxStatTable | ETH-SWITCH-MIB |
| 1.3.6.1.4.1.208.39.4.2.1 | rxStatEntry | ETH-SWITCH-MIB |
| 1.3.6.1.4.1.208.39.4.2.1.55 | rxAllCounterOthers | ETH-SWITCH-MIB |