ETH-SWITCH-MIB :: defaultThrottleBackMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ETH-SWITCH-MIB › defaultThrottleBackMode

defaultThrottleBackMode

Module: ETH-SWITCH-MIB

OID (symbolic): ETH-SWITCH-MIB::defaultThrottleBackMode

OID (numeric): 1.3.6.1.4.1.208.39.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Default ThrottleBack mode. used by the object portThrottleBack when its value is default(1)

What is defaultThrottleBackMode?

Sets the switch-wide default for throttle-back flow control (enabled or disabled), applied to any port whose own portIfThrottleBack setting is left at default(1). Throttle-back is a congestion-control mechanism, so this default changes how ports react to buffer pressure unless a port has been explicitly overridden.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.208.39.1.3
snmpwalk -v2c -c public <target> ETH-SWITCH-MIB::defaultThrottleBackMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.208.39.1.3.1
snmpget -v2c -c public <target> ETH-SWITCH-MIB::defaultThrottleBackMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.208.39.1.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> defaultThrottleBackMode.1

Start monitoring Ethernet switch with port/VLAN management (vendor not confirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ETH-SWITCH-MIB::defaultThrottleBackMode OID value, configure state conditions and alerts, and monitor any Ethernet switch with port/VLAN management (vendor not confirmed) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.208scanetSCANET-MIB
Numeric OIDNameModule
1.3.6.1.4.1.208.39ethSwitchETH-SWITCH-MIB
1.3.6.1.4.1.208.39.1controlETH-SWITCH-MIB
1.3.6.1.4.1.208.39.1.3defaultThrottleBackModeETH-SWITCH-MIB