ERICSSON-ROUTER-MC-LAG-MIB :: eriRouterMcLagOperErrorCode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ERICSSON-ROUTER-MC-LAG-MIB › eriRouterMcLagOperErrorCode

eriRouterMcLagOperErrorCode

Module: ERICSSON-ROUTER-MC-LAG-MIB

OID (symbolic): ERICSSON-ROUTER-MC-LAG-MIB::eriRouterMcLagOperErrorCode

OID (numeric): 1.3.6.1.4.1.193.218.2.102.1.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The reason that MC-LAG is Down. configMismatch - MC-LAG is down because LAG related configuration is not the same between the two LAGs in an MC-LAG. priorityError - MC-LAG is down because the configured port priority values between the two LAGs of an MC-LAG are ambiguous as to which LAG is higher in priority. downMinLink - MC-LAG is down because the LAG doesn't have enough links that are up to satisfy the configured minimum link requirement.

What is eriRouterMcLagOperErrorCode?

This read-only value reports the specific reason the MC-LAG is down: a configuration mismatch between the two LAGs, an ambiguous priority comparison, or too few active member links to meet the configured minimum. An admin reads this alongside the operational state object to diagnose an outage without having to manually compare LAG configuration on both chassis. For example, a value of downMinLink(3) tells the admin the LAG dropped below its configured minimum-link threshold, likely because too many member ports went down.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.218.2.102.1.1.1.8
snmpwalk -v2c -c public <target> ERICSSON-ROUTER-MC-LAG-MIB::eriRouterMcLagOperErrorCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.218.2.102.1.1.1.8.1
snmpget -v2c -c public <target> ERICSSON-ROUTER-MC-LAG-MIB::eriRouterMcLagOperErrorCode.1

Start monitoring Ericsson routers and metro Ethernet platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERICSSON-ROUTER-MC-LAG-MIB::eriRouterMcLagOperErrorCode OID value, configure state conditions and alerts, and monitor any Ericsson routers and metro Ethernet platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.218eriRouterSMIERICSSON-ROUTER-SMI
1.3.6.1.4.1.193.218.2eriRouterMgmtERICSSON-ROUTER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.218.2.102eriRouterMcLagMIBERICSSON-ROUTER-MC-LAG-MIB
1.3.6.1.4.1.193.218.2.102.1eriRouterMcLagObjectsERICSSON-ROUTER-MC-LAG-MIB
1.3.6.1.4.1.193.218.2.102.1.1eriRouterMcLagTableERICSSON-ROUTER-MC-LAG-MIB
1.3.6.1.4.1.193.218.2.102.1.1.1eriRouterMcLagEntryERICSSON-ROUTER-MC-LAG-MIB
1.3.6.1.4.1.193.218.2.102.1.1.1.8eriRouterMcLagOperErrorCodeERICSSON-ROUTER-MC-LAG-MIB