ENTERASYS-SNTP-CLIENT-MIB :: etsysSntpClientMode

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › ENTERASYS-SNTP-CLIENT-MIB › etsysSntpClientMode

etsysSntpClientMode

Module: ENTERASYS-SNTP-CLIENT-MIB

OID (symbolic): ENTERASYS-SNTP-CLIENT-MIB::etsysSntpClientMode

OID (numeric): 1.3.6.1.4.1.5624.1.2.38.1.1.3

Node type: OBJECT-TYPE

Type: SntpClientOperModes

Access: read-write

Description: The current operational mode of the SNTP client. A SET of this object will cause the SNTP client to change operational modes. A SET request MUST have only 1 bit set since is not possible to operate in multiple modes simultaneously. SETs of this object are further limited to values supported by the device as specified by etsysSntpClientSupportedMode. Maintaining the value of this object across agent reboots is REQUIRED.

What is etsysSntpClientMode?

The SNTP mode the client is currently running in, and a writable control an admin uses to switch it — for example setting it to unicast so the device polls specific configured time servers instead of listening passively for broadcasts. Only one mode bit may be set at a time, and the chosen mode must be one the device advertises as supported.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.38.1.1.3
snmpwalk -v2c -c public <target> ENTERASYS-SNTP-CLIENT-MIB::etsysSntpClientMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.38.1.1.3.1
snmpget -v2c -c public <target> ENTERASYS-SNTP-CLIENT-MIB::etsysSntpClientMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.38.1.1.3.1 s <value>

Start monitoring Enterasys (Extreme Networks) switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-SNTP-CLIENT-MIB::etsysSntpClientMode OID value, configure state conditions and alerts, and monitor any Enterasys (Extreme Networks) switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.38etsysSntpClientMIBENTERASYS-SNTP-CLIENT-MIB
1.3.6.1.4.1.5624.1.2.38.1etsysSntpClientObjectsENTERASYS-SNTP-CLIENT-MIB
1.3.6.1.4.1.5624.1.2.38.1.1etsysSntpClientDeviceENTERASYS-SNTP-CLIENT-MIB
1.3.6.1.4.1.5624.1.2.38.1.1.3etsysSntpClientModeENTERASYS-SNTP-CLIENT-MIB