All MIBs › ENTERASYS-MULTI-AUTH-MIB › etsysMultiAuthSessionVlanTunnelAttribute
etsysMultiAuthSessionVlanTunnelAttribute
Module: ENTERASYS-MULTI-AUTH-MIB
OID (symbolic): ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthSessionVlanTunnelAttribute
OID (numeric): 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.14
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The VLAN Tunnel Attribute (Tunnel-Group-ID) returned from the authentication server for this session.
This value is interpreted as the 12 bit VLAN identifier to be applied to traffic from the session entity. Policy VLAN classification rules have precedence in assigning VLAN, however, in the absence of any applicable rules, this VLAN will be used. If the traffic is already tagged, this VLAN will only be applied if TCI overwrite has been enabled (through Policy or ctDot1qPortReplaceTCI).
A value of zero indicates that there is no authenticated VLAN ID for the given session (none was provided by the authentication server). Should a session become unauthenticated this value MUST return zero.
A value of 4095 indicates that a the session has been authenticated, but that the VLAN returned could not be applied to the port (possibly because of resource constraints or misconfiguration). The traffic from the session entity will be assigned VLAN through Policy or standard 802.1Q mechanisms.
What is etsysMultiAuthSessionVlanTunnelAttribute?
The VLAN ID (Tunnel-Group-ID RADIUS attribute) the authentication server assigned to this session's traffic; 0 means no VLAN was assigned, and 4095 means a VLAN was assigned but couldn't actually be applied to the port (e.g., due to resource limits), leaving traffic to fall back to Policy or standard 802.1Q handling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.14 snmpwalk -v2c -c public <target> ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthSessionVlanTunnelAttribute
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.14.1 snmpget -v2c -c public <target> ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthSessionVlanTunnelAttribute.1
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (concurrent 802.1X/PWA/MAC/CEP authentication) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthSessionVlanTunnelAttribute OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (concurrent 802.1X/PWA/MAC/CEP authentication) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.46 | etsysMultiAuthMIB | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1 | etsysMultiAuthObjects | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1.4 | etsysMultiAuthSession | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1.4.1 | etsysMultiAuthSessionStationTable | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1.4.1.1 | etsysMultiAuthSessionStationEntry | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1.4.1.1.14 | etsysMultiAuthSessionVlanTunnelAttribute | ENTERASYS-MULTI-AUTH-MIB |