All MIBs › ENTERASYS-MULTI-AUTH-MIB › etsysMultiAuthPortTrapEnable
etsysMultiAuthPortTrapEnable
Module: ENTERASYS-MULTI-AUTH-MIB
OID (symbolic): ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthPortTrapEnable
OID (numeric): 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object allows for the enabling or disabling of each
trap on a per interface basis. Setting a given bit to a value
of 1 allows traps of that type to be sent for events on that
interface. Setting a given bit to a value of 0 disallows traps
of that type to be sent for events on that interface. The
individual bits correlate to specific traps as follows:
BIT NOTIFICATION
----------------------------------------------------------------
authSuccessTrap(0) etsysMultiAuthSuccess
authFailedTrap(1) etsysMultiAuthFailed
authTerminatedTrap(2) etsysMultiAuthTerminated
maxNumUsersReachedTrap(3) etsysMultiAuthMaxNumUsersReached
What is etsysMultiAuthPortTrapEnable?
A per-port bitmask enabling which authentication-event traps (success, failure, termination, or hitting the per-port user cap) get sent for this interface, so noisy trap types can be turned off per port without affecting the whole device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6 snmpwalk -v2c -c public <target> ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthPortTrapEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6.1 snmpget -v2c -c public <target> ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthPortTrapEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (concurrent 802.1X/PWA/MAC/CEP authentication) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-MULTI-AUTH-MIB::etsysMultiAuthPortTrapEnable OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (concurrent 802.1X/PWA/MAC/CEP authentication) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.46 | etsysMultiAuthMIB | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1 | etsysMultiAuthObjects | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1.2 | etsysMultiAuthPort | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1.2.1 | etsysMultiAuthPortTable | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1.2.1.1 | etsysMultiAuthPortEntry | ENTERASYS-MULTI-AUTH-MIB |
| 1.3.6.1.4.1.5624.1.2.46.1.2.1.1.6 | etsysMultiAuthPortTrapEnable | ENTERASYS-MULTI-AUTH-MIB |